git/t/t7418-submodule-sparse-gitmodules.sh

131 lines
4 KiB
Bash
Raw Normal View History

submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
#!/bin/sh
#
# Copyright (C) 2018 Antonio Ospite <ao2@ao2.it>
#
test_description='Test reading/writing .gitmodules when not in the working tree
This test verifies that, when .gitmodules is in the current branch but is not
in the working tree reading from it still works but writing to it does not.
The test setup uses a sparse checkout, however the same scenario can be set up
also by committing .gitmodules and then just removing it from the filesystem.
'
GIT_TEST_FATAL_REGISTER_SUBMODULE_ODB=1
export GIT_TEST_FATAL_REGISTER_SUBMODULE_ODB
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
. ./test-lib.sh
test_expect_success 'setup' '
git config --global protocol.file.allow always
'
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
test_expect_success 'sparse checkout setup which hides .gitmodules' '
git init upstream &&
git init submodule &&
(cd submodule &&
echo file >file &&
git add file &&
test_tick &&
git commit -m "Add file"
) &&
(cd upstream &&
git submodule add ../submodule &&
test_tick &&
git commit -m "Add submodule"
) &&
git clone --template= upstream super &&
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
(cd super &&
mkdir .git/info &&
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
cat >.git/info/sparse-checkout <<-\EOF &&
/*
!/.gitmodules
EOF
git config core.sparsecheckout true &&
git read-tree -m -u HEAD &&
test_path_is_missing .gitmodules
)
'
test_expect_success 'reading gitmodules config file when it is not checked out' '
echo "../submodule" >expect &&
test-tool -C super submodule config-list submodule.submodule.url >actual &&
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
test_cmp expect actual
'
test_expect_success 'not writing gitmodules config file when it is not checked out' '
test_must_fail test-tool -C super submodule config-set submodule.submodule.url newurl &&
submodule: support reading .gitmodules when it's not in the working tree When the .gitmodules file is not available in the working tree, try using the content from the index and from the current branch. This covers the case when the file is part of the repository but for some reason it is not checked out, for example because of a sparse checkout. This makes it possible to use at least the 'git submodule' commands which *read* the gitmodules configuration file without fully populating the working tree. Writing to .gitmodules will still require that the file is checked out, so check for that before calling config_set_in_gitmodules_file_gently. Add a similar check also in git-submodule.sh::cmd_add() to anticipate the eventual failure of the "git submodule add" command when .gitmodules is not safely writeable; this prevents the command from leaving the repository in a spurious state (e.g. the submodule repository was cloned but .gitmodules was not updated because config_set_in_gitmodules_file_gently failed). Moreover, since config_from_gitmodules() now accesses the global object store, it is necessary to protect all code paths which call the function against concurrent access to the global object store. Currently this only happens in builtin/grep.c::grep_submodules(), so call grep_read_lock() before invoking code involving config_from_gitmodules(). Finally, add t7418-submodule-sparse-gitmodules.sh to verify that reading from .gitmodules succeeds and that writing to it fails when the file is not checked out. NOTE: there is one rare case where this new feature does not work properly yet: nested submodules without .gitmodules in their working tree. This has been documented with a warning and a test_expect_failure item in t7814, and in this case the current behavior is not altered: no config is read. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-10-25 16:18:12 +00:00
test_path_is_missing super/.gitmodules
'
test_expect_success 'initialising submodule when the gitmodules config is not checked out' '
test_must_fail git -C super config submodule.submodule.url &&
git -C super submodule init &&
git -C super config submodule.submodule.url >actual &&
echo "$(pwd)/submodule" >expect &&
test_cmp expect actual
'
test_expect_success 'updating submodule when the gitmodules config is not checked out' '
test_path_is_missing super/submodule/file &&
git -C super submodule update &&
test_cmp submodule/file super/submodule/file
'
ORIG_SUBMODULE=$(git -C submodule rev-parse HEAD)
ORIG_UPSTREAM=$(git -C upstream rev-parse HEAD)
ORIG_SUPER=$(git -C super rev-parse HEAD)
test_expect_success 're-updating submodule when the gitmodules config is not checked out' '
test_when_finished "git -C submodule reset --hard $ORIG_SUBMODULE;
git -C upstream reset --hard $ORIG_UPSTREAM;
git -C super reset --hard $ORIG_SUPER;
git -C upstream submodule update --remote;
git -C super pull;
git -C super submodule update --remote" &&
(cd submodule &&
echo file2 >file2 &&
git add file2 &&
test_tick &&
git commit -m "Add file2 to submodule"
) &&
(cd upstream &&
git submodule update --remote &&
git add submodule &&
test_tick &&
git commit -m "Update submodule"
) &&
git -C super pull &&
# The --for-status options reads the gitmodules config
git -C super submodule summary --for-status >actual &&
rev1=$(git -C submodule rev-parse --short HEAD) &&
rev2=$(git -C submodule rev-parse --short HEAD^) &&
cat >expect <<-EOF &&
* submodule ${rev1}...${rev2} (1):
< Add file2 to submodule
EOF
test_cmp expect actual &&
# Test that the update actually succeeds
test_path_is_missing super/submodule/file2 &&
git -C super submodule update &&
test_cmp submodule/file2 super/submodule/file2 &&
git -C super status --short >output &&
test_must_be_empty output
'
test_expect_success 'not adding submodules when the gitmodules config is not checked out' '
git clone submodule new_submodule &&
test_must_fail git -C super submodule add ../new_submodule &&
test_path_is_missing .gitmodules
'
# This test checks that the previous "git submodule add" did not leave the
# repository in a spurious state when it failed.
test_expect_success 'init submodule still works even after the previous add failed' '
git -C super submodule init
'
test_done