git/t/t3427-rebase-subtree.sh

94 lines
3.1 KiB
Bash
Raw Normal View History

#!/bin/sh
test_description='git rebase tests for -Xsubtree
This test runs git rebase and tests the subtree strategy.
'
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
tests: mark tests relying on the current default for `init.defaultBranch` In addition to the manual adjustment to let the `linux-gcc` CI job run the test suite with `master` and then with `main`, this patch makes sure that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts that currently rely on the initial branch name being `master by default. To determine which test scripts to mark up, the first step was to force-set the default branch name to `master` in - all test scripts that contain the keyword `master`, - t4211, which expects `t/t4211/history.export` with a hard-coded ref to initialize the default branch, - t5560 because it sources `t/t556x_common` which uses `master`, - t8002 and t8012 because both source `t/annotate-tests.sh` which also uses `master`) This trick was performed by this command: $ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' $(git grep -l master t/t[0-9]*.sh) \ t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh After that, careful, manual inspection revealed that some of the test scripts containing the needle `master` do not actually rely on a specific default branch name: either they mention `master` only in a comment, or they initialize that branch specificially, or they do not actually refer to the current default branch. Therefore, the aforementioned modification was undone in those test scripts thusly: $ git checkout HEAD -- \ t/t0027-auto-crlf.sh t/t0060-path-utils.sh \ t/t1011-read-tree-sparse-checkout.sh \ t/t1305-config-include.sh t/t1309-early-config.sh \ t/t1402-check-ref-format.sh t/t1450-fsck.sh \ t/t2024-checkout-dwim.sh \ t/t2106-update-index-assume-unchanged.sh \ t/t3040-subprojects-basic.sh t/t3301-notes.sh \ t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \ t/t3436-rebase-more-options.sh \ t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \ t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \ t/t5511-refspec.sh t/t5526-fetch-submodules.sh \ t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \ t/t5548-push-porcelain.sh \ t/t5552-skipping-fetch-negotiator.sh \ t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \ t/t5614-clone-submodules-shallow.sh \ t/t7508-status.sh t/t7606-merge-custom.sh \ t/t9302-fast-import-unpack-limit.sh We excluded one set of test scripts in these commands, though: the range of `git p4` tests. The reason? `git p4` stores the (foreign) remote branch in the branch called `p4/master`, which is obviously not the default branch. Manual analysis revealed that only five of these tests actually require a specific default branch name to pass; They were modified thusly: $ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' t/t980[0167]*.sh t/t9811*.sh Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:19 +00:00
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
. ./test-lib.sh
. "$TEST_DIRECTORY"/lib-rebase.sh
commit_message() {
git log --pretty=format:%s -1 "$1"
}
# There are a few bugs in the rebase with regards to the subtree strategy, and
# this test script tries to document them. First, the following commit history
# is generated (the onelines are shown, time flows from left to right):
#
# topic_1 - topic_2 - topic_3
# \
# README ---------------------- Add subproject main - topic_4 - files_subtree/topic_5
#
# Where the merge moves the files topic_[123].t into the subdirectory
# files_subtree/ and topic_4 as well as files_subtree/topic_5 add files to that
# directory directly.
#
# Then, in subsequent test cases, `git filter-branch` is used to distill just
# the commits that touch files_subtree/. To give it a final pre-rebase touch,
# an empty commit is added on top. The pre-rebase commit history looks like
# this:
#
# Add subproject main - topic_4 - files_subtree/topic_5 - Empty commit
#
# where the root commit adds three files: topic_1.t, topic_2.t and topic_3.t.
#
# This commit history is then rebased onto `topic_3` with the
# `-Xsubtree=files_subtree` option in two different ways:
#
# 1. without specifying a rebase backend
# 2. using the `--rebase-merges` backend
test_expect_success 'setup' '
test_commit README &&
git init files &&
test_commit -C files topic_1 &&
test_commit -C files topic_2 &&
test_commit -C files topic_3 &&
: perform subtree merge into files_subtree/ &&
git fetch files refs/heads/main:refs/heads/files-main &&
git merge -s ours --no-commit --allow-unrelated-histories \
files-main &&
git read-tree --prefix=files_subtree -u files-main &&
git commit -m "Add subproject main" &&
: add two extra commits to rebase &&
test_commit -C files_subtree topic_4 &&
test_commit files_subtree/topic_5 &&
git checkout -b to-rebase &&
git fast-export --no-data HEAD -- files_subtree/ |
sed -e "s%\([0-9a-f]\{40\} \)files_subtree/%\1%" |
git fast-import --force --quiet &&
git reset --hard &&
git commit -m "Empty commit" --allow-empty
'
rebase (interactive-backend): fix handling of commits that become empty As established in the previous commit and commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default, 2018-06-27), the behavior for rebase with different backends in various edge or corner cases is often more happenstance than design. This commit addresses another such corner case: commits which "become empty". A careful reader may note that there are two types of commits which would become empty due to a rebase: * [clean cherry-pick] Commits which are clean cherry-picks of upstream commits, as determined by `git log --cherry-mark ...`. Re-applying these commits would result in an empty set of changes and a duplicative commit message; i.e. these are commits that have "already been applied" upstream. * [become empty] Commits which are not empty to start, are not clean cherry-picks of upstream commits, but which still become empty after being rebased. This happens e.g. when a commit has changes which are a strict subset of the changes in an upstream commit, or when the changes of a commit can be found spread across or among several upstream commits. Clearly, in both cases the changes in the commit in question are found upstream already, but the commit message may not be in the latter case. When cherry-mark can determine a commit is already upstream, then because of how cherry-mark works this means the upstream commit message was about the *exact* same set of changes. Thus, the commit messages can be assumed to be fully interchangeable (and are in fact likely to be completely identical). As such, the clean cherry-pick case represents a case when there is no information to be gained by keeping the extra commit around. All rebase types have always dropped these commits, and no one to my knowledge has ever requested that we do otherwise. For many of the become empty cases (and likely even most), we will also be able to drop the commit without loss of information -- but this isn't quite always the case. Since these commits represent cases that were not clean cherry-picks, there is no upstream commit message explaining the same set of changes. Projects with good commit message hygiene will likely have the explanation from our commit message contained within or spread among the relevant upstream commits, but not all projects run that way. As such, the commit message of the commit being rebased may have reasoning that suggests additional changes that should be made to adapt to the new base, or it may have information that someone wants to add as a note to another commit, or perhaps someone even wants to create an empty commit with the commit message as-is. Junio commented on the "become-empty" types of commits as follows[1]: WRT a change that ends up being empty (as opposed to a change that is empty from the beginning), I'd think that the current behaviour is desireable one. "am" based rebase is solely to transplant an existing history and want to stop much less than "interactive" one whose purpose is to polish a series before making it publishable, and asking for confirmation ("this has become empty--do you want to drop it?") is more appropriate from the workflow point of view. [1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/ I would simply add that his arguments for "am"-based rebases actually apply to all non-explicitly-interactive rebases. Also, since we are stating that different cases should have different defaults, it may be worth providing a flag to allow users to select which behavior they want for these commits. Introduce a new command line flag for selecting the desired behavior: --empty={drop,keep,ask} with the definitions: drop: drop commits which become empty keep: keep commits which become empty ask: provide the user a chance to interact and pick what to do with commits which become empty on a case-by-case basis In line with Junio's suggestion, if the --empty flag is not specified, pick defaults as follows: explicitly interactive: ask otherwise: drop Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-15 21:36:25 +00:00
test_expect_success 'Rebase -Xsubtree --empty=ask --onto commit' '
reset_rebase &&
git checkout -b rebase-onto to-rebase &&
test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --onto files-main main &&
: first pick results in no changes &&
rebase (interactive-backend): make --keep-empty the default Different rebase backends have different treatment for commits which start empty (i.e. have no changes relative to their parent), and the --keep-empty option was added at some point to allow adjusting behavior. The handling of commits which start empty is actually quite similar to commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default, 2018-06-27), which pointed out that the behavior for various backends is often more happenstance than design. The specific change made in that commit is actually quite relevant as well and much of the logic there directly applies here. It makes a lot of sense in 'git commit' to error out on the creation of empty commits, unless an override flag is provided. However, once someone determines that there is a rare case that merits using the manual override to create such a commit, it is somewhere between annoying and harmful to have to take extra steps to keep such intentional commits around. Granted, empty commits are quite rare, which is why handling of them doesn't get considered much and folks tend to defer to existing (accidental) behavior and assume there was a reason for it, leading them to just add flags (--keep-empty in this case) that allow them to override the bad defaults. Fix the interactive backend so that --keep-empty is the default, much like we did with --allow-empty-message. The am backend should also be fixed to have --keep-empty semantics for commits that start empty, but that is not included in this patch other than a testcase documenting the failure. Note that there was one test in t3421 which appears to have been written expecting --keep-empty to not be the default as correct behavior. This test was introduced in commit 00b8be5a4d38 ("add tests for rebasing of empty commits", 2013-06-06), which was part of a series focusing on rebase topology and which had an interesting original cover letter at https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/ which noted Your input especially appreciated on whether you agree with the intent of the test cases. and then went into a long example about how one of the many tests added had several questions about whether it was correct. As such, I believe most the tests in that series were about testing rebase topology with as many different flags as possible and were not trying to state in general how those flags should behave otherwise. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-15 21:36:24 +00:00
git rebase --skip &&
test "$(commit_message HEAD~2)" = "topic_4" &&
test "$(commit_message HEAD~)" = "files_subtree/topic_5" &&
test "$(commit_message HEAD)" = "Empty commit"
'
rebase (interactive-backend): fix handling of commits that become empty As established in the previous commit and commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default, 2018-06-27), the behavior for rebase with different backends in various edge or corner cases is often more happenstance than design. This commit addresses another such corner case: commits which "become empty". A careful reader may note that there are two types of commits which would become empty due to a rebase: * [clean cherry-pick] Commits which are clean cherry-picks of upstream commits, as determined by `git log --cherry-mark ...`. Re-applying these commits would result in an empty set of changes and a duplicative commit message; i.e. these are commits that have "already been applied" upstream. * [become empty] Commits which are not empty to start, are not clean cherry-picks of upstream commits, but which still become empty after being rebased. This happens e.g. when a commit has changes which are a strict subset of the changes in an upstream commit, or when the changes of a commit can be found spread across or among several upstream commits. Clearly, in both cases the changes in the commit in question are found upstream already, but the commit message may not be in the latter case. When cherry-mark can determine a commit is already upstream, then because of how cherry-mark works this means the upstream commit message was about the *exact* same set of changes. Thus, the commit messages can be assumed to be fully interchangeable (and are in fact likely to be completely identical). As such, the clean cherry-pick case represents a case when there is no information to be gained by keeping the extra commit around. All rebase types have always dropped these commits, and no one to my knowledge has ever requested that we do otherwise. For many of the become empty cases (and likely even most), we will also be able to drop the commit without loss of information -- but this isn't quite always the case. Since these commits represent cases that were not clean cherry-picks, there is no upstream commit message explaining the same set of changes. Projects with good commit message hygiene will likely have the explanation from our commit message contained within or spread among the relevant upstream commits, but not all projects run that way. As such, the commit message of the commit being rebased may have reasoning that suggests additional changes that should be made to adapt to the new base, or it may have information that someone wants to add as a note to another commit, or perhaps someone even wants to create an empty commit with the commit message as-is. Junio commented on the "become-empty" types of commits as follows[1]: WRT a change that ends up being empty (as opposed to a change that is empty from the beginning), I'd think that the current behaviour is desireable one. "am" based rebase is solely to transplant an existing history and want to stop much less than "interactive" one whose purpose is to polish a series before making it publishable, and asking for confirmation ("this has become empty--do you want to drop it?") is more appropriate from the workflow point of view. [1] https://lore.kernel.org/git/xmqqfu1fswdh.fsf@gitster-ct.c.googlers.com/ I would simply add that his arguments for "am"-based rebases actually apply to all non-explicitly-interactive rebases. Also, since we are stating that different cases should have different defaults, it may be worth providing a flag to allow users to select which behavior they want for these commits. Introduce a new command line flag for selecting the desired behavior: --empty={drop,keep,ask} with the definitions: drop: drop commits which become empty keep: keep commits which become empty ask: provide the user a chance to interact and pick what to do with commits which become empty on a case-by-case basis In line with Junio's suggestion, if the --empty flag is not specified, pick defaults as follows: explicitly interactive: ask otherwise: drop Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-15 21:36:25 +00:00
test_expect_success 'Rebase -Xsubtree --empty=ask --rebase-merges --onto commit' '
reset_rebase &&
git checkout -b rebase-merges-onto to-rebase &&
test_must_fail git rebase -Xsubtree=files_subtree --empty=ask --rebase-merges --onto files-main --root &&
: first pick results in no changes &&
rebase (interactive-backend): make --keep-empty the default Different rebase backends have different treatment for commits which start empty (i.e. have no changes relative to their parent), and the --keep-empty option was added at some point to allow adjusting behavior. The handling of commits which start empty is actually quite similar to commit b00bf1c9a8dd (git-rebase: make --allow-empty-message the default, 2018-06-27), which pointed out that the behavior for various backends is often more happenstance than design. The specific change made in that commit is actually quite relevant as well and much of the logic there directly applies here. It makes a lot of sense in 'git commit' to error out on the creation of empty commits, unless an override flag is provided. However, once someone determines that there is a rare case that merits using the manual override to create such a commit, it is somewhere between annoying and harmful to have to take extra steps to keep such intentional commits around. Granted, empty commits are quite rare, which is why handling of them doesn't get considered much and folks tend to defer to existing (accidental) behavior and assume there was a reason for it, leading them to just add flags (--keep-empty in this case) that allow them to override the bad defaults. Fix the interactive backend so that --keep-empty is the default, much like we did with --allow-empty-message. The am backend should also be fixed to have --keep-empty semantics for commits that start empty, but that is not included in this patch other than a testcase documenting the failure. Note that there was one test in t3421 which appears to have been written expecting --keep-empty to not be the default as correct behavior. This test was introduced in commit 00b8be5a4d38 ("add tests for rebasing of empty commits", 2013-06-06), which was part of a series focusing on rebase topology and which had an interesting original cover letter at https://lore.kernel.org/git/1347949878-12578-1-git-send-email-martinvonz@gmail.com/ which noted Your input especially appreciated on whether you agree with the intent of the test cases. and then went into a long example about how one of the many tests added had several questions about whether it was correct. As such, I believe most the tests in that series were about testing rebase topology with as many different flags as possible and were not trying to state in general how those flags should behave otherwise. Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-02-15 21:36:24 +00:00
git rebase --skip &&
test "$(commit_message HEAD~2)" = "topic_4" &&
test "$(commit_message HEAD~)" = "files_subtree/topic_5" &&
test "$(commit_message HEAD)" = "Empty commit"
'
test_done