git svn: reset invalidates the memoized mergeinfo caches
Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every 'git svn fetch'.
This memoization can cause problems, e.g consider the following case:
SVN repo:
... - a - b - c - m <- trunk
\ /
d - e <- branch1
The Git import of the above repo is at commit 'a' and doesn't know about
the branch1. In case of an 'git svn rebase', only the trunk of the
SVN repo is imported. During the creation of the git commit 'm', git svn
uses the svn:mergeinfo property and tries to find the corresponding git
commit 'e' to create 'm' with 'c' and 'e' as parents. But git svn rebase
only imports the current branch so commit 'e' is not imported.
Therefore git svn fails to create commit 'm' as a merge commit, because one
of its parents is not known to git. The imported history looks like this:
... - a - b - c - m <- trunk
A later 'git svn fetch' to import all branches can't rewrite the commit 'm'
to add 'e' as a parent and to make it a real git merge commit, because it
was already imported.
That's why the imported history misses the merge and looks like this:
... - a - b - c - m <- trunk
\
d - e <- branch1
Right now the only known workaround for importing 'm' as a merge is to
force reimporting 'm' again from SVN, e.g. via
$ git svn reset --revision $(git find-rev $c)
$ git svn fetch
Sadly, this is where the behavior has regressed: git svn reset doesn't
invalidate the old mergeinfo cache, which is no longer valid for the
reimport, which leads to 'm' beeing imprted with only 'c' as parent.
As solution to this problem, this commit invalidates the mergeinfo cache
to force correct recalculation of the parents.
During development of this patch, several ways for invalidating the cache
where considered. One of them is to use Memoize::flush_cache, which will
call the CLEAR method on the underlying Memoize persistency implementation.
Sadly, neither Memoize::Storable nor the newer Memoize::YAML module
introduced in 68f532f4ba888 could optionally be used implement the
CLEAR method, so this is not an option.
Reseting the internal hash used to store the memoized values has the same
problem, because it calls the non-existing CLEAR method of the
underlying persistency layer, too.
Considering this and taking into account the different implementations
of the memoization modules, where Memoize::Storable is not in our control,
implementing the missing CLEAR method is not an option, at least not if
Memoize::Storable is still used.
Therefore the easiest solution to clear the cache is to delete the files
on disk in 'git svn reset'. Normally, deleting the files behind the back
of the memoization module would be problematic, because the in-memory
representation would still exist and contain wrong data. Fortunately, the
memoization is active in memory only for a small portion of the code.
Invalidating the cache by deleting the files on disk if it isn't active
should be safe.
Signed-off-by: Peter Baumann <waste.manager@gmx.de>
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
2012-08-09 06:42:53 +00:00
|
|
|
#!/bin/sh
|
|
|
|
|
#
|
|
|
|
|
# Copyright (c) 2012 Peter Baumann
|
|
|
|
|
#
|
|
|
|
|
|
|
|
|
|
test_description='git svn reset clears memoized caches'
|
2020-11-18 23:44:42 +00:00
|
|
|
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
|
tests: mark tests relying on the current default for `init.defaultBranch`
In addition to the manual adjustment to let the `linux-gcc` CI job run
the test suite with `master` and then with `main`, this patch makes sure
that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts
that currently rely on the initial branch name being `master by default.
To determine which test scripts to mark up, the first step was to
force-set the default branch name to `master` in
- all test scripts that contain the keyword `master`,
- t4211, which expects `t/t4211/history.export` with a hard-coded ref to
initialize the default branch,
- t5560 because it sources `t/t556x_common` which uses `master`,
- t8002 and t8012 because both source `t/annotate-tests.sh` which also
uses `master`)
This trick was performed by this command:
$ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' $(git grep -l master t/t[0-9]*.sh) \
t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh
After that, careful, manual inspection revealed that some of the test
scripts containing the needle `master` do not actually rely on a
specific default branch name: either they mention `master` only in a
comment, or they initialize that branch specificially, or they do not
actually refer to the current default branch. Therefore, the
aforementioned modification was undone in those test scripts thusly:
$ git checkout HEAD -- \
t/t0027-auto-crlf.sh t/t0060-path-utils.sh \
t/t1011-read-tree-sparse-checkout.sh \
t/t1305-config-include.sh t/t1309-early-config.sh \
t/t1402-check-ref-format.sh t/t1450-fsck.sh \
t/t2024-checkout-dwim.sh \
t/t2106-update-index-assume-unchanged.sh \
t/t3040-subprojects-basic.sh t/t3301-notes.sh \
t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \
t/t3436-rebase-more-options.sh \
t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \
t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \
t/t5511-refspec.sh t/t5526-fetch-submodules.sh \
t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \
t/t5548-push-porcelain.sh \
t/t5552-skipping-fetch-negotiator.sh \
t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \
t/t5614-clone-submodules-shallow.sh \
t/t7508-status.sh t/t7606-merge-custom.sh \
t/t9302-fast-import-unpack-limit.sh
We excluded one set of test scripts in these commands, though: the range
of `git p4` tests. The reason? `git p4` stores the (foreign) remote
branch in the branch called `p4/master`, which is obviously not the
default branch. Manual analysis revealed that only five of these tests
actually require a specific default branch name to pass; They were
modified thusly:
$ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\
' t/t980[0167]*.sh t/t9811*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:19 +00:00
|
|
|
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
|
|
|
|
|
|
git svn: reset invalidates the memoized mergeinfo caches
Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every 'git svn fetch'.
This memoization can cause problems, e.g consider the following case:
SVN repo:
... - a - b - c - m <- trunk
\ /
d - e <- branch1
The Git import of the above repo is at commit 'a' and doesn't know about
the branch1. In case of an 'git svn rebase', only the trunk of the
SVN repo is imported. During the creation of the git commit 'm', git svn
uses the svn:mergeinfo property and tries to find the corresponding git
commit 'e' to create 'm' with 'c' and 'e' as parents. But git svn rebase
only imports the current branch so commit 'e' is not imported.
Therefore git svn fails to create commit 'm' as a merge commit, because one
of its parents is not known to git. The imported history looks like this:
... - a - b - c - m <- trunk
A later 'git svn fetch' to import all branches can't rewrite the commit 'm'
to add 'e' as a parent and to make it a real git merge commit, because it
was already imported.
That's why the imported history misses the merge and looks like this:
... - a - b - c - m <- trunk
\
d - e <- branch1
Right now the only known workaround for importing 'm' as a merge is to
force reimporting 'm' again from SVN, e.g. via
$ git svn reset --revision $(git find-rev $c)
$ git svn fetch
Sadly, this is where the behavior has regressed: git svn reset doesn't
invalidate the old mergeinfo cache, which is no longer valid for the
reimport, which leads to 'm' beeing imprted with only 'c' as parent.
As solution to this problem, this commit invalidates the mergeinfo cache
to force correct recalculation of the parents.
During development of this patch, several ways for invalidating the cache
where considered. One of them is to use Memoize::flush_cache, which will
call the CLEAR method on the underlying Memoize persistency implementation.
Sadly, neither Memoize::Storable nor the newer Memoize::YAML module
introduced in 68f532f4ba888 could optionally be used implement the
CLEAR method, so this is not an option.
Reseting the internal hash used to store the memoized values has the same
problem, because it calls the non-existing CLEAR method of the
underlying persistency layer, too.
Considering this and taking into account the different implementations
of the memoization modules, where Memoize::Storable is not in our control,
implementing the missing CLEAR method is not an option, at least not if
Memoize::Storable is still used.
Therefore the easiest solution to clear the cache is to delete the files
on disk in 'git svn reset'. Normally, deleting the files behind the back
of the memoization module would be problematic, because the in-memory
representation would still exist and contain wrong data. Fortunately, the
memoization is active in memory only for a small portion of the code.
Invalidating the cache by deleting the files on disk if it isn't active
should be safe.
Signed-off-by: Peter Baumann <waste.manager@gmx.de>
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
2012-08-09 06:42:53 +00:00
|
|
|
. ./lib-git-svn.sh
|
|
|
|
|
|
|
|
|
|
svn_ver="$(svn --version --quiet)"
|
|
|
|
|
case $svn_ver in
|
|
|
|
|
0.* | 1.[0-4].*)
|
|
|
|
|
skip_all="skipping git-svn test - SVN too old ($svn_ver)"
|
|
|
|
|
test_done
|
|
|
|
|
;;
|
|
|
|
|
esac
|
|
|
|
|
|
|
|
|
|
# ... a - b - m <- trunk
|
|
|
|
|
# \ /
|
|
|
|
|
# ... c <- branch1
|
|
|
|
|
#
|
|
|
|
|
# SVN Commits not interesting for this test are abbreviated with "..."
|
|
|
|
|
#
|
|
|
|
|
test_expect_success 'initialize source svn repo' '
|
|
|
|
|
svn_cmd mkdir -m "create trunk" "$svnrepo"/trunk &&
|
|
|
|
|
svn_cmd mkdir -m "create branches" "$svnrepo/branches" &&
|
|
|
|
|
svn_cmd co "$svnrepo"/trunk "$SVN_TREE" &&
|
|
|
|
|
(
|
|
|
|
|
cd "$SVN_TREE" &&
|
|
|
|
|
touch foo &&
|
|
|
|
|
svn_cmd add foo &&
|
|
|
|
|
svn_cmd commit -m "a" &&
|
|
|
|
|
svn_cmd cp -m branch "$svnrepo"/trunk "$svnrepo"/branches/branch1 &&
|
|
|
|
|
svn_cmd switch "$svnrepo"/branches/branch1 &&
|
|
|
|
|
touch bar &&
|
|
|
|
|
svn_cmd add bar &&
|
|
|
|
|
svn_cmd commit -m b &&
|
|
|
|
|
svn_cmd switch "$svnrepo"/trunk &&
|
|
|
|
|
touch baz &&
|
|
|
|
|
svn_cmd add baz &&
|
|
|
|
|
svn_cmd commit -m c &&
|
|
|
|
|
svn_cmd up &&
|
|
|
|
|
svn_cmd merge "$svnrepo"/branches/branch1 &&
|
|
|
|
|
svn_cmd commit -m "m"
|
|
|
|
|
) &&
|
|
|
|
|
rm -rf "$SVN_TREE"
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
test_expect_success 'fetch to merge-base (a)' '
|
|
|
|
|
git svn init -s "$svnrepo" &&
|
|
|
|
|
git svn fetch --revision BASE:3
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
# git svn rebase looses the merge commit
|
|
|
|
|
#
|
|
|
|
|
# ... a - b - m <- trunk
|
|
|
|
|
# \
|
|
|
|
|
# ... c
|
|
|
|
|
#
|
|
|
|
|
test_expect_success 'rebase looses SVN merge (m)' '
|
|
|
|
|
git svn rebase &&
|
|
|
|
|
git svn fetch &&
|
2020-11-18 23:44:42 +00:00
|
|
|
test 1 = $(git cat-file -p main|grep parent|wc -l)
|
git svn: reset invalidates the memoized mergeinfo caches
Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every 'git svn fetch'.
This memoization can cause problems, e.g consider the following case:
SVN repo:
... - a - b - c - m <- trunk
\ /
d - e <- branch1
The Git import of the above repo is at commit 'a' and doesn't know about
the branch1. In case of an 'git svn rebase', only the trunk of the
SVN repo is imported. During the creation of the git commit 'm', git svn
uses the svn:mergeinfo property and tries to find the corresponding git
commit 'e' to create 'm' with 'c' and 'e' as parents. But git svn rebase
only imports the current branch so commit 'e' is not imported.
Therefore git svn fails to create commit 'm' as a merge commit, because one
of its parents is not known to git. The imported history looks like this:
... - a - b - c - m <- trunk
A later 'git svn fetch' to import all branches can't rewrite the commit 'm'
to add 'e' as a parent and to make it a real git merge commit, because it
was already imported.
That's why the imported history misses the merge and looks like this:
... - a - b - c - m <- trunk
\
d - e <- branch1
Right now the only known workaround for importing 'm' as a merge is to
force reimporting 'm' again from SVN, e.g. via
$ git svn reset --revision $(git find-rev $c)
$ git svn fetch
Sadly, this is where the behavior has regressed: git svn reset doesn't
invalidate the old mergeinfo cache, which is no longer valid for the
reimport, which leads to 'm' beeing imprted with only 'c' as parent.
As solution to this problem, this commit invalidates the mergeinfo cache
to force correct recalculation of the parents.
During development of this patch, several ways for invalidating the cache
where considered. One of them is to use Memoize::flush_cache, which will
call the CLEAR method on the underlying Memoize persistency implementation.
Sadly, neither Memoize::Storable nor the newer Memoize::YAML module
introduced in 68f532f4ba888 could optionally be used implement the
CLEAR method, so this is not an option.
Reseting the internal hash used to store the memoized values has the same
problem, because it calls the non-existing CLEAR method of the
underlying persistency layer, too.
Considering this and taking into account the different implementations
of the memoization modules, where Memoize::Storable is not in our control,
implementing the missing CLEAR method is not an option, at least not if
Memoize::Storable is still used.
Therefore the easiest solution to clear the cache is to delete the files
on disk in 'git svn reset'. Normally, deleting the files behind the back
of the memoization module would be problematic, because the in-memory
representation would still exist and contain wrong data. Fortunately, the
memoization is active in memory only for a small portion of the code.
Invalidating the cache by deleting the files on disk if it isn't active
should be safe.
Signed-off-by: Peter Baumann <waste.manager@gmx.de>
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
2012-08-09 06:42:53 +00:00
|
|
|
'
|
|
|
|
|
|
|
|
|
|
# git svn fetch creates correct history with merge commit
|
|
|
|
|
#
|
|
|
|
|
# ... a - b - m <- trunk
|
|
|
|
|
# \ /
|
|
|
|
|
# ... c <- branch1
|
|
|
|
|
#
|
|
|
|
|
test_expect_success 'reset and fetch gets the SVN merge (m) correctly' '
|
|
|
|
|
git svn reset -r 3 &&
|
Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not given
git-svn by default puts its Subversion-tracking refs directly in
refs/remotes/*. This runs counter to Git's convention of using
refs/remotes/$remote/* for storing remote-tracking branches.
Furthermore, combining git-svn with regular git remotes run the risk of
clobbering refs under refs/remotes (e.g. if you have a git remote
called "tags" with a "v1" branch, it will overlap with the git-svn's
tracking branch for the "v1" tag from Subversion.
Even though the git-svn refs stored in refs/remotes/* are not "proper"
remote-tracking branches (since they are not covered by a proper git
remote's refspec), they clearly represent a similar concept, and would
benefit from following the same convention.
For example, if git-svn tracks Subversion branch "foo" at
refs/remotes/foo, and you create a local branch refs/heads/foo to add
some commits to be pushed back to Subversion (using "git svn dcommit),
then it is clearly unhelpful of Git to throw
warning: refname 'foo' is ambiguous.
every time you checkout, rebase, or otherwise interact with the branch.
The existing workaround for this is to supply the --prefix=quux/ to
git svn init/clone, so that git-svn's tracking branches end up in
refs/remotes/quux/* instead of refs/remotes/*. However, encouraging
users to specify --prefix to work around a design flaw in git-svn is
suboptimal, and not a long term solution to the problem. Instead,
git-svn should default to use a non-empty prefix that saves
unsuspecting users from the inconveniences described above.
This patch will only affect newly created git-svn setups, as the
--prefix option only applies to git svn init (and git svn clone).
Existing git-svn setups will continue with their existing (lack of)
prefix. Also, if anyone somehow prefers git-svn's old layout, they
can recreate that by explicitly passing an empty prefix (--prefix "")
on the git svn init/clone command line.
The patch changes the default value for --prefix from "" to "origin/",
updates the git-svn manual page, and fixes the fallout in the git-svn
testcases.
(Note that this patch might be easier to review using the --word-diff
and --word-diff-regex=. diff options.)
[ew: squashed description of <= 1.9 behavior into manpage]
Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
2013-10-11 12:57:07 +00:00
|
|
|
git reset --hard origin/trunk &&
|
git svn: reset invalidates the memoized mergeinfo caches
Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every 'git svn fetch'.
This memoization can cause problems, e.g consider the following case:
SVN repo:
... - a - b - c - m <- trunk
\ /
d - e <- branch1
The Git import of the above repo is at commit 'a' and doesn't know about
the branch1. In case of an 'git svn rebase', only the trunk of the
SVN repo is imported. During the creation of the git commit 'm', git svn
uses the svn:mergeinfo property and tries to find the corresponding git
commit 'e' to create 'm' with 'c' and 'e' as parents. But git svn rebase
only imports the current branch so commit 'e' is not imported.
Therefore git svn fails to create commit 'm' as a merge commit, because one
of its parents is not known to git. The imported history looks like this:
... - a - b - c - m <- trunk
A later 'git svn fetch' to import all branches can't rewrite the commit 'm'
to add 'e' as a parent and to make it a real git merge commit, because it
was already imported.
That's why the imported history misses the merge and looks like this:
... - a - b - c - m <- trunk
\
d - e <- branch1
Right now the only known workaround for importing 'm' as a merge is to
force reimporting 'm' again from SVN, e.g. via
$ git svn reset --revision $(git find-rev $c)
$ git svn fetch
Sadly, this is where the behavior has regressed: git svn reset doesn't
invalidate the old mergeinfo cache, which is no longer valid for the
reimport, which leads to 'm' beeing imprted with only 'c' as parent.
As solution to this problem, this commit invalidates the mergeinfo cache
to force correct recalculation of the parents.
During development of this patch, several ways for invalidating the cache
where considered. One of them is to use Memoize::flush_cache, which will
call the CLEAR method on the underlying Memoize persistency implementation.
Sadly, neither Memoize::Storable nor the newer Memoize::YAML module
introduced in 68f532f4ba888 could optionally be used implement the
CLEAR method, so this is not an option.
Reseting the internal hash used to store the memoized values has the same
problem, because it calls the non-existing CLEAR method of the
underlying persistency layer, too.
Considering this and taking into account the different implementations
of the memoization modules, where Memoize::Storable is not in our control,
implementing the missing CLEAR method is not an option, at least not if
Memoize::Storable is still used.
Therefore the easiest solution to clear the cache is to delete the files
on disk in 'git svn reset'. Normally, deleting the files behind the back
of the memoization module would be problematic, because the in-memory
representation would still exist and contain wrong data. Fortunately, the
memoization is active in memory only for a small portion of the code.
Invalidating the cache by deleting the files on disk if it isn't active
should be safe.
Signed-off-by: Peter Baumann <waste.manager@gmx.de>
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
2012-08-09 06:42:53 +00:00
|
|
|
git svn fetch &&
|
Git 2.0: git svn: Set default --prefix='origin/' if --prefix is not given
git-svn by default puts its Subversion-tracking refs directly in
refs/remotes/*. This runs counter to Git's convention of using
refs/remotes/$remote/* for storing remote-tracking branches.
Furthermore, combining git-svn with regular git remotes run the risk of
clobbering refs under refs/remotes (e.g. if you have a git remote
called "tags" with a "v1" branch, it will overlap with the git-svn's
tracking branch for the "v1" tag from Subversion.
Even though the git-svn refs stored in refs/remotes/* are not "proper"
remote-tracking branches (since they are not covered by a proper git
remote's refspec), they clearly represent a similar concept, and would
benefit from following the same convention.
For example, if git-svn tracks Subversion branch "foo" at
refs/remotes/foo, and you create a local branch refs/heads/foo to add
some commits to be pushed back to Subversion (using "git svn dcommit),
then it is clearly unhelpful of Git to throw
warning: refname 'foo' is ambiguous.
every time you checkout, rebase, or otherwise interact with the branch.
The existing workaround for this is to supply the --prefix=quux/ to
git svn init/clone, so that git-svn's tracking branches end up in
refs/remotes/quux/* instead of refs/remotes/*. However, encouraging
users to specify --prefix to work around a design flaw in git-svn is
suboptimal, and not a long term solution to the problem. Instead,
git-svn should default to use a non-empty prefix that saves
unsuspecting users from the inconveniences described above.
This patch will only affect newly created git-svn setups, as the
--prefix option only applies to git svn init (and git svn clone).
Existing git-svn setups will continue with their existing (lack of)
prefix. Also, if anyone somehow prefers git-svn's old layout, they
can recreate that by explicitly passing an empty prefix (--prefix "")
on the git svn init/clone command line.
The patch changes the default value for --prefix from "" to "origin/",
updates the git-svn manual page, and fixes the fallout in the git-svn
testcases.
(Note that this patch might be easier to review using the --word-diff
and --word-diff-regex=. diff options.)
[ew: squashed description of <= 1.9 behavior into manpage]
Suggested-by: Thomas Ferris Nicolaisen <tfnico@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
2013-10-11 12:57:07 +00:00
|
|
|
test 2 = $(git cat-file -p origin/trunk|grep parent|wc -l)
|
git svn: reset invalidates the memoized mergeinfo caches
Since v1.7.0-rc2~11 (git-svn: persistent memoization, 2010-01-30),
git-svn has maintained some private per-repository caches in
.git/svn/.caches to avoid refetching and recalculating some
mergeinfo-related information with every 'git svn fetch'.
This memoization can cause problems, e.g consider the following case:
SVN repo:
... - a - b - c - m <- trunk
\ /
d - e <- branch1
The Git import of the above repo is at commit 'a' and doesn't know about
the branch1. In case of an 'git svn rebase', only the trunk of the
SVN repo is imported. During the creation of the git commit 'm', git svn
uses the svn:mergeinfo property and tries to find the corresponding git
commit 'e' to create 'm' with 'c' and 'e' as parents. But git svn rebase
only imports the current branch so commit 'e' is not imported.
Therefore git svn fails to create commit 'm' as a merge commit, because one
of its parents is not known to git. The imported history looks like this:
... - a - b - c - m <- trunk
A later 'git svn fetch' to import all branches can't rewrite the commit 'm'
to add 'e' as a parent and to make it a real git merge commit, because it
was already imported.
That's why the imported history misses the merge and looks like this:
... - a - b - c - m <- trunk
\
d - e <- branch1
Right now the only known workaround for importing 'm' as a merge is to
force reimporting 'm' again from SVN, e.g. via
$ git svn reset --revision $(git find-rev $c)
$ git svn fetch
Sadly, this is where the behavior has regressed: git svn reset doesn't
invalidate the old mergeinfo cache, which is no longer valid for the
reimport, which leads to 'm' beeing imprted with only 'c' as parent.
As solution to this problem, this commit invalidates the mergeinfo cache
to force correct recalculation of the parents.
During development of this patch, several ways for invalidating the cache
where considered. One of them is to use Memoize::flush_cache, which will
call the CLEAR method on the underlying Memoize persistency implementation.
Sadly, neither Memoize::Storable nor the newer Memoize::YAML module
introduced in 68f532f4ba888 could optionally be used implement the
CLEAR method, so this is not an option.
Reseting the internal hash used to store the memoized values has the same
problem, because it calls the non-existing CLEAR method of the
underlying persistency layer, too.
Considering this and taking into account the different implementations
of the memoization modules, where Memoize::Storable is not in our control,
implementing the missing CLEAR method is not an option, at least not if
Memoize::Storable is still used.
Therefore the easiest solution to clear the cache is to delete the files
on disk in 'git svn reset'. Normally, deleting the files behind the back
of the memoization module would be problematic, because the in-memory
representation would still exist and contain wrong data. Fortunately, the
memoization is active in memory only for a small portion of the code.
Invalidating the cache by deleting the files on disk if it isn't active
should be safe.
Signed-off-by: Peter Baumann <waste.manager@gmx.de>
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
2012-08-09 06:42:53 +00:00
|
|
|
'
|
|
|
|
|
|
|
|
|
|
test_done
|