git/range-diff.c

615 lines
16 KiB
C
Raw Normal View History

#include "git-compat-util.h"
#include "environment.h"
#include "gettext.h"
#include "range-diff.h"
#include "object-name.h"
#include "string-list.h"
#include "run-command.h"
#include "strvec.h"
#include "hashmap.h"
#include "xdiff-interface.h"
#include "linear-assignment.h"
range-diff: also show the diff between patches Just like tbdiff, we now show the diff between matching patches. This is a "diff of two diffs", so it can be a bit daunting to read for the beginner. An alternative would be to display an interdiff, i.e. the hypothetical diff which is the result of first reverting the old diff and then applying the new diff. Especially when rebasing frequently, an interdiff is often not feasible, though: if the old diff cannot be applied in reverse (due to a moving upstream), an interdiff can simply not be inferred. This commit brings `range-diff` closer to feature parity with regard to tbdiff. To make `git range-diff` respect e.g. color.diff.* settings, we have to adjust git_branch_config() accordingly. Note: while we now parse diff options such as --color, the effect is not yet the same as in tbdiff, where also the commit pairs would be colored. This is left for a later commit. Note also: while tbdiff accepts the `--no-patches` option to suppress these diffs between patches, we prefer the `-s` (or `--no-patch`) option that is automatically supported via our use of diff_opt_parse(). And finally note: to support diff options, we have to call `parse_options()` such that it keeps unknown options, and then loop over those and let `diff_opt_parse()` handle them. After that loop, we have to call `parse_options()` again, to make sure that no unknown options are left. Helped-by: Thomas Gummerer <t.gummerer@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 11:33:07 +00:00
#include "diffcore.h"
#include "commit.h"
#include "pager.h"
#include "pretty.h"
#include "userdiff.h"
#include "apply.h"
#include "revision.h"
struct patch_util {
/* For the search for an exact match */
struct hashmap_entry e;
const char *diff, *patch;
int i, shown;
int diffsize;
size_t diff_offset;
/* the index of the matching item in the other branch, or -1 */
int matching;
struct object_id oid;
};
/*
* Reads the patches into a string list, with the `util` field being populated
* as struct object_id (will need to be free()d).
*/
static int read_patches(const char *range, struct string_list *list,
const struct strvec *other_arg)
{
struct child_process cp = CHILD_PROCESS_INIT;
struct strbuf buf = STRBUF_INIT, contents = STRBUF_INIT;
struct patch_util *util = NULL;
int in_header = 1;
char *line, *current_filename = NULL;
ssize_t len;
size_t size;
int ret = -1;
strvec_pushl(&cp.args, "log", "--no-color", "-p", "--no-merges",
"--reverse", "--date-order", "--decorate=no",
"--no-prefix", "--submodule=short",
/*
* Choose indicators that are not used anywhere
* else in diffs, but still look reasonable
* (e.g. will not be confusing when debugging)
*/
"--output-indicator-new=>",
"--output-indicator-old=<",
"--output-indicator-context=#",
"--no-abbrev-commit",
"--pretty=medium",
"--notes",
NULL);
strvec_push(&cp.args, range);
if (other_arg)
strvec_pushv(&cp.args, other_arg->v);
cp.out = -1;
cp.no_stdin = 1;
cp.git_cmd = 1;
if (start_command(&cp))
return error_errno(_("could not start `log`"));
if (strbuf_read(&contents, cp.out, 0) < 0) {
error_errno(_("could not read `log` output"));
finish_command(&cp);
goto cleanup;
}
if (finish_command(&cp))
goto cleanup;
line = contents.buf;
size = contents.len;
for (; size > 0; size -= len, line += len) {
const char *p;
range-diff: handle unterminated lines in read_patches() When parsing our buffer of output from git-log, we have a find_end_of_line() helper that finds the next newline, and gives us the number of bytes to move past it, or the size of the whole remaining buffer if there is no newline. But trying to handle both those cases leads to some oddities: - we try to overwrite the newline with NUL in the caller, by writing over line[len-1]. This is at best redundant, since the helper will already have done so if it saw a newline. But if it didn't see a newline, it's actively wrong; we'll overwrite the byte at the end of the (unterminated) line. We could solve this just dropping the extra NUL assignment in the caller and just letting the helper do the right thing. But... - if we see a "diff --git" line, we'll restore the newline on top of the NUL byte, so we can pass the string to parse_git_diff_header(). But if there was no newline in the first place, we can't do this. There's no place to put it (the current code writes a newline over whatever byte we obliterated earlier). The best we can do is feed the complete remainder of the buffer to the function (which is, in fact, a string, by virtue of being a strbuf). To solve this, the caller needs to know whether we actually found a newline or not. We could modify find_end_of_line() to return that information, but we can further observe that it has only one caller. So let's just inline it in that caller. Nobody seems to have noticed this case, probably because git-log would never produce input that doesn't end with a newline. Arguably we could just return an error as soon as we see that the output does not end in a newline. But the code to do so actually ends up _longer_, mostly because of the cleanup we have to do in handling the error. Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-08-09 22:48:39 +00:00
char *eol;
eol = memchr(line, '\n', size);
if (eol) {
*eol = '\0';
len = eol + 1 - line;
} else {
len = size;
}
if (skip_prefix(line, "commit ", &p)) {
if (util) {
string_list_append(list, buf.buf)->util = util;
strbuf_reset(&buf);
}
CALLOC_ARRAY(util, 1);
if (repo_get_oid(the_repository, p, &util->oid)) {
error(_("could not parse commit '%s'"), p);
FREE_AND_NULL(util);
string_list_clear(list, 1);
goto cleanup;
}
util->matching = -1;
in_header = 1;
continue;
}
if (!util) {
error(_("could not parse first line of `log` output: "
"did not start with 'commit ': '%s'"),
line);
string_list_clear(list, 1);
goto cleanup;
}
if (starts_with(line, "diff --git")) {
struct patch patch = { 0 };
struct strbuf root = STRBUF_INIT;
int linenr = 0;
int orig_len;
in_header = 0;
strbuf_addch(&buf, '\n');
if (!util->diff_offset)
util->diff_offset = buf.len;
range-diff: handle unterminated lines in read_patches() When parsing our buffer of output from git-log, we have a find_end_of_line() helper that finds the next newline, and gives us the number of bytes to move past it, or the size of the whole remaining buffer if there is no newline. But trying to handle both those cases leads to some oddities: - we try to overwrite the newline with NUL in the caller, by writing over line[len-1]. This is at best redundant, since the helper will already have done so if it saw a newline. But if it didn't see a newline, it's actively wrong; we'll overwrite the byte at the end of the (unterminated) line. We could solve this just dropping the extra NUL assignment in the caller and just letting the helper do the right thing. But... - if we see a "diff --git" line, we'll restore the newline on top of the NUL byte, so we can pass the string to parse_git_diff_header(). But if there was no newline in the first place, we can't do this. There's no place to put it (the current code writes a newline over whatever byte we obliterated earlier). The best we can do is feed the complete remainder of the buffer to the function (which is, in fact, a string, by virtue of being a strbuf). To solve this, the caller needs to know whether we actually found a newline or not. We could modify find_end_of_line() to return that information, but we can further observe that it has only one caller. So let's just inline it in that caller. Nobody seems to have noticed this case, probably because git-log would never produce input that doesn't end with a newline. Arguably we could just return an error as soon as we see that the output does not end in a newline. But the code to do so actually ends up _longer_, mostly because of the cleanup we have to do in handling the error. Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-08-09 22:48:39 +00:00
if (eol)
*eol = '\n';
orig_len = len;
len = parse_git_diff_header(&root, &linenr, 0, line,
len, size, &patch);
if (len < 0) {
error(_("could not parse git header '%.*s'"),
orig_len, line);
FREE_AND_NULL(util);
string_list_clear(list, 1);
goto cleanup;
}
strbuf_addstr(&buf, " ## ");
if (patch.is_new > 0)
strbuf_addf(&buf, "%s (new)", patch.new_name);
else if (patch.is_delete > 0)
strbuf_addf(&buf, "%s (deleted)", patch.old_name);
else if (patch.is_rename)
strbuf_addf(&buf, "%s => %s", patch.old_name, patch.new_name);
else
strbuf_addstr(&buf, patch.new_name);
free(current_filename);
if (patch.is_delete > 0)
current_filename = xstrdup(patch.old_name);
else
current_filename = xstrdup(patch.new_name);
if (patch.new_mode && patch.old_mode &&
patch.old_mode != patch.new_mode)
strbuf_addf(&buf, " (mode change %06o => %06o)",
patch.old_mode, patch.new_mode);
strbuf_addstr(&buf, " ##");
release_patch(&patch);
} else if (in_header) {
if (starts_with(line, "Author: ")) {
strbuf_addstr(&buf, " ## Metadata ##\n");
strbuf_addstr(&buf, line);
strbuf_addstr(&buf, "\n\n");
strbuf_addstr(&buf, " ## Commit message ##\n");
} else if (starts_with(line, "Notes") &&
line[strlen(line) - 1] == ':') {
strbuf_addstr(&buf, "\n\n");
/* strip the trailing colon */
strbuf_addf(&buf, " ## %.*s ##\n",
(int)(strlen(line) - 1), line);
} else if (starts_with(line, " ")) {
p = line + len - 2;
while (isspace(*p) && p >= line)
p--;
strbuf_add(&buf, line, p - line + 1);
strbuf_addch(&buf, '\n');
}
continue;
} else if (skip_prefix(line, "@@ ", &p)) {
p = strstr(p, "@@");
strbuf_addstr(&buf, "@@");
if (current_filename && p[2])
strbuf_addf(&buf, " %s:", current_filename);
if (p)
strbuf_addstr(&buf, p + 2);
} else if (!line[0])
/*
* A completely blank (not ' \n', which is context)
* line is not valid in a diff. We skip it
* silently, because this neatly handles the blank
* separator line between commits in git-log
* output.
*/
continue;
else if (line[0] == '>') {
strbuf_addch(&buf, '+');
strbuf_addstr(&buf, line + 1);
} else if (line[0] == '<') {
strbuf_addch(&buf, '-');
strbuf_addstr(&buf, line + 1);
} else if (line[0] == '#') {
strbuf_addch(&buf, ' ');
strbuf_addstr(&buf, line + 1);
} else {
strbuf_addch(&buf, ' ');
strbuf_addstr(&buf, line);
}
strbuf_addch(&buf, '\n');
util->diffsize++;
}
ret = 0;
cleanup:
strbuf_release(&contents);
if (util)
string_list_append(list, buf.buf)->util = util;
strbuf_release(&buf);
free(current_filename);
return ret;
}
static int patch_util_cmp(const void *cmp_data UNUSED,
const struct patch_util *a,
const struct patch_util *b,
const char *keydata)
{
return strcmp(a->diff, keydata ? keydata : b->diff);
}
static void find_exact_matches(struct string_list *a, struct string_list *b)
{
struct hashmap map = HASHMAP_INIT((hashmap_cmp_fn)patch_util_cmp, NULL);
int i;
/* First, add the patches of a to a hash map */
for (i = 0; i < a->nr; i++) {
struct patch_util *util = a->items[i].util;
util->i = i;
util->patch = a->items[i].string;
util->diff = util->patch + util->diff_offset;
hashmap_entry_init(&util->e, strhash(util->diff));
hashmap_add(&map, &util->e);
}
/* Now try to find exact matches in b */
for (i = 0; i < b->nr; i++) {
struct patch_util *util = b->items[i].util, *other;
util->i = i;
util->patch = b->items[i].string;
util->diff = util->patch + util->diff_offset;
hashmap_entry_init(&util->e, strhash(util->diff));
other = hashmap_remove_entry(&map, util, e, NULL);
if (other) {
if (other->matching >= 0)
BUG("already assigned!");
other->matching = i;
util->matching = other->i;
}
}
hashmap_clear(&map);
}
static int diffsize_consume(void *data,
char *line UNUSED,
unsigned long len UNUSED)
{
(*(int *)data)++;
return 0;
}
static void diffsize_hunk(void *data,
long ob UNUSED, long on UNUSED,
long nb UNUSED, long nn UNUSED,
const char *func UNUSED, long funclen UNUSED)
{
diffsize_consume(data, NULL, 0);
}
static int diffsize(const char *a, const char *b)
{
xpparam_t pp = { 0 };
xdemitconf_t cfg = { 0 };
mmfile_t mf1, mf2;
int count = 0;
mf1.ptr = (char *)a;
mf1.size = strlen(a);
mf2.ptr = (char *)b;
mf2.size = strlen(b);
cfg.ctxlen = 3;
if (!xdi_diff_outf(&mf1, &mf2,
diffsize_hunk, diffsize_consume, &count,
&pp, &cfg))
return count;
error(_("failed to generate diff"));
return COST_MAX;
}
static void get_correspondences(struct string_list *a, struct string_list *b,
int creation_factor)
{
int n = a->nr + b->nr;
int *cost, c, *a2b, *b2a;
int i, j;
ALLOC_ARRAY(cost, st_mult(n, n));
ALLOC_ARRAY(a2b, n);
ALLOC_ARRAY(b2a, n);
for (i = 0; i < a->nr; i++) {
struct patch_util *a_util = a->items[i].util;
for (j = 0; j < b->nr; j++) {
struct patch_util *b_util = b->items[j].util;
if (a_util->matching == j)
c = 0;
else if (a_util->matching < 0 && b_util->matching < 0)
c = diffsize(a_util->diff, b_util->diff);
else
c = COST_MAX;
cost[i + n * j] = c;
}
c = a_util->matching < 0 ?
a_util->diffsize * creation_factor / 100 : COST_MAX;
for (j = b->nr; j < n; j++)
cost[i + n * j] = c;
}
for (j = 0; j < b->nr; j++) {
struct patch_util *util = b->items[j].util;
c = util->matching < 0 ?
util->diffsize * creation_factor / 100 : COST_MAX;
for (i = a->nr; i < n; i++)
cost[i + n * j] = c;
}
for (i = a->nr; i < n; i++)
for (j = b->nr; j < n; j++)
cost[i + n * j] = 0;
compute_assignment(n, n, cost, a2b, b2a);
for (i = 0; i < a->nr; i++)
if (a2b[i] >= 0 && a2b[i] < b->nr) {
struct patch_util *a_util = a->items[i].util;
struct patch_util *b_util = b->items[a2b[i]].util;
a_util->matching = a2b[i];
b_util->matching = i;
}
free(cost);
free(a2b);
free(b2a);
}
static void output_pair_header(struct diff_options *diffopt,
int patch_no_width,
struct strbuf *buf,
struct strbuf *dashes,
struct patch_util *a_util,
struct patch_util *b_util)
{
struct object_id *oid = a_util ? &a_util->oid : &b_util->oid;
struct commit *commit;
char status;
const char *color_reset = diff_get_color_opt(diffopt, DIFF_RESET);
const char *color_old = diff_get_color_opt(diffopt, DIFF_FILE_OLD);
const char *color_new = diff_get_color_opt(diffopt, DIFF_FILE_NEW);
const char *color_commit = diff_get_color_opt(diffopt, DIFF_COMMIT);
const char *color;
int abbrev = diffopt->abbrev;
if (abbrev < 0)
abbrev = DEFAULT_ABBREV;
if (!dashes->len)
strbuf_addchars(dashes, '-',
strlen(repo_find_unique_abbrev(the_repository, oid, abbrev)));
if (!b_util) {
color = color_old;
status = '<';
} else if (!a_util) {
color = color_new;
status = '>';
} else if (strcmp(a_util->patch, b_util->patch)) {
color = color_commit;
status = '!';
} else {
color = color_commit;
status = '=';
}
strbuf_reset(buf);
strbuf_addstr(buf, status == '!' ? color_old : color);
if (!a_util)
strbuf_addf(buf, "%*s: %s ", patch_no_width, "-", dashes->buf);
else
strbuf_addf(buf, "%*d: %s ", patch_no_width, a_util->i + 1,
repo_find_unique_abbrev(the_repository, &a_util->oid, abbrev));
if (status == '!')
strbuf_addf(buf, "%s%s", color_reset, color);
strbuf_addch(buf, status);
if (status == '!')
strbuf_addf(buf, "%s%s", color_reset, color_new);
if (!b_util)
strbuf_addf(buf, " %*s: %s", patch_no_width, "-", dashes->buf);
else
strbuf_addf(buf, " %*d: %s", patch_no_width, b_util->i + 1,
repo_find_unique_abbrev(the_repository, &b_util->oid, abbrev));
commit = lookup_commit_reference(the_repository, oid);
if (commit) {
if (status == '!')
strbuf_addf(buf, "%s%s", color_reset, color);
strbuf_addch(buf, ' ');
pp_commit_easy(CMIT_FMT_ONELINE, commit, buf);
}
strbuf_addf(buf, "%s\n", color_reset);
fwrite(buf->buf, buf->len, 1, diffopt->file);
}
static struct userdiff_driver section_headers = {
.funcname = { "^ ## (.*) ##$\n"
"^.?@@ (.*)$", REG_EXTENDED }
};
range-diff: also show the diff between patches Just like tbdiff, we now show the diff between matching patches. This is a "diff of two diffs", so it can be a bit daunting to read for the beginner. An alternative would be to display an interdiff, i.e. the hypothetical diff which is the result of first reverting the old diff and then applying the new diff. Especially when rebasing frequently, an interdiff is often not feasible, though: if the old diff cannot be applied in reverse (due to a moving upstream), an interdiff can simply not be inferred. This commit brings `range-diff` closer to feature parity with regard to tbdiff. To make `git range-diff` respect e.g. color.diff.* settings, we have to adjust git_branch_config() accordingly. Note: while we now parse diff options such as --color, the effect is not yet the same as in tbdiff, where also the commit pairs would be colored. This is left for a later commit. Note also: while tbdiff accepts the `--no-patches` option to suppress these diffs between patches, we prefer the `-s` (or `--no-patch`) option that is automatically supported via our use of diff_opt_parse(). And finally note: to support diff options, we have to call `parse_options()` such that it keeps unknown options, and then loop over those and let `diff_opt_parse()` handle them. After that loop, we have to call `parse_options()` again, to make sure that no unknown options are left. Helped-by: Thomas Gummerer <t.gummerer@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 11:33:07 +00:00
static struct diff_filespec *get_filespec(const char *name, const char *p)
{
struct diff_filespec *spec = alloc_filespec(name);
fill_filespec(spec, null_oid(), 0, 0100644);
range-diff: also show the diff between patches Just like tbdiff, we now show the diff between matching patches. This is a "diff of two diffs", so it can be a bit daunting to read for the beginner. An alternative would be to display an interdiff, i.e. the hypothetical diff which is the result of first reverting the old diff and then applying the new diff. Especially when rebasing frequently, an interdiff is often not feasible, though: if the old diff cannot be applied in reverse (due to a moving upstream), an interdiff can simply not be inferred. This commit brings `range-diff` closer to feature parity with regard to tbdiff. To make `git range-diff` respect e.g. color.diff.* settings, we have to adjust git_branch_config() accordingly. Note: while we now parse diff options such as --color, the effect is not yet the same as in tbdiff, where also the commit pairs would be colored. This is left for a later commit. Note also: while tbdiff accepts the `--no-patches` option to suppress these diffs between patches, we prefer the `-s` (or `--no-patch`) option that is automatically supported via our use of diff_opt_parse(). And finally note: to support diff options, we have to call `parse_options()` such that it keeps unknown options, and then loop over those and let `diff_opt_parse()` handle them. After that loop, we have to call `parse_options()` again, to make sure that no unknown options are left. Helped-by: Thomas Gummerer <t.gummerer@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 11:33:07 +00:00
spec->data = (char *)p;
spec->size = strlen(p);
spec->should_munmap = 0;
spec->is_stdin = 1;
spec->driver = &section_headers;
range-diff: also show the diff between patches Just like tbdiff, we now show the diff between matching patches. This is a "diff of two diffs", so it can be a bit daunting to read for the beginner. An alternative would be to display an interdiff, i.e. the hypothetical diff which is the result of first reverting the old diff and then applying the new diff. Especially when rebasing frequently, an interdiff is often not feasible, though: if the old diff cannot be applied in reverse (due to a moving upstream), an interdiff can simply not be inferred. This commit brings `range-diff` closer to feature parity with regard to tbdiff. To make `git range-diff` respect e.g. color.diff.* settings, we have to adjust git_branch_config() accordingly. Note: while we now parse diff options such as --color, the effect is not yet the same as in tbdiff, where also the commit pairs would be colored. This is left for a later commit. Note also: while tbdiff accepts the `--no-patches` option to suppress these diffs between patches, we prefer the `-s` (or `--no-patch`) option that is automatically supported via our use of diff_opt_parse(). And finally note: to support diff options, we have to call `parse_options()` such that it keeps unknown options, and then loop over those and let `diff_opt_parse()` handle them. After that loop, we have to call `parse_options()` again, to make sure that no unknown options are left. Helped-by: Thomas Gummerer <t.gummerer@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 11:33:07 +00:00
return spec;
}
static void patch_diff(const char *a, const char *b,
struct diff_options *diffopt)
range-diff: also show the diff between patches Just like tbdiff, we now show the diff between matching patches. This is a "diff of two diffs", so it can be a bit daunting to read for the beginner. An alternative would be to display an interdiff, i.e. the hypothetical diff which is the result of first reverting the old diff and then applying the new diff. Especially when rebasing frequently, an interdiff is often not feasible, though: if the old diff cannot be applied in reverse (due to a moving upstream), an interdiff can simply not be inferred. This commit brings `range-diff` closer to feature parity with regard to tbdiff. To make `git range-diff` respect e.g. color.diff.* settings, we have to adjust git_branch_config() accordingly. Note: while we now parse diff options such as --color, the effect is not yet the same as in tbdiff, where also the commit pairs would be colored. This is left for a later commit. Note also: while tbdiff accepts the `--no-patches` option to suppress these diffs between patches, we prefer the `-s` (or `--no-patch`) option that is automatically supported via our use of diff_opt_parse(). And finally note: to support diff options, we have to call `parse_options()` such that it keeps unknown options, and then loop over those and let `diff_opt_parse()` handle them. After that loop, we have to call `parse_options()` again, to make sure that no unknown options are left. Helped-by: Thomas Gummerer <t.gummerer@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 11:33:07 +00:00
{
diff_queue(&diff_queued_diff,
get_filespec("a", a), get_filespec("b", b));
diffcore_std(diffopt);
diff_flush(diffopt);
}
static struct strbuf *output_prefix_cb(struct diff_options *opt UNUSED, void *data)
{
return data;
}
range-diff: also show the diff between patches Just like tbdiff, we now show the diff between matching patches. This is a "diff of two diffs", so it can be a bit daunting to read for the beginner. An alternative would be to display an interdiff, i.e. the hypothetical diff which is the result of first reverting the old diff and then applying the new diff. Especially when rebasing frequently, an interdiff is often not feasible, though: if the old diff cannot be applied in reverse (due to a moving upstream), an interdiff can simply not be inferred. This commit brings `range-diff` closer to feature parity with regard to tbdiff. To make `git range-diff` respect e.g. color.diff.* settings, we have to adjust git_branch_config() accordingly. Note: while we now parse diff options such as --color, the effect is not yet the same as in tbdiff, where also the commit pairs would be colored. This is left for a later commit. Note also: while tbdiff accepts the `--no-patches` option to suppress these diffs between patches, we prefer the `-s` (or `--no-patch`) option that is automatically supported via our use of diff_opt_parse(). And finally note: to support diff options, we have to call `parse_options()` such that it keeps unknown options, and then loop over those and let `diff_opt_parse()` handle them. After that loop, we have to call `parse_options()` again, to make sure that no unknown options are left. Helped-by: Thomas Gummerer <t.gummerer@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 11:33:07 +00:00
static void output(struct string_list *a, struct string_list *b,
struct range_diff_options *range_diff_opts)
{
struct strbuf buf = STRBUF_INIT, dashes = STRBUF_INIT;
int patch_no_width = decimal_width(1 + (a->nr > b->nr ? a->nr : b->nr));
int i = 0, j = 0;
struct diff_options opts;
struct strbuf indent = STRBUF_INIT;
if (range_diff_opts->diffopt)
memcpy(&opts, range_diff_opts->diffopt, sizeof(opts));
else
repo_diff_setup(the_repository, &opts);
opts.no_free = 1;
if (!opts.output_format)
opts.output_format = DIFF_FORMAT_PATCH;
opts.flags.suppress_diff_headers = 1;
opts.flags.dual_color_diffed_diffs =
range_diff_opts->dual_color;
opts.flags.suppress_hunk_header_line_count = 1;
opts.output_prefix = output_prefix_cb;
strbuf_addstr(&indent, " ");
opts.output_prefix_data = &indent;
diff_setup_done(&opts);
/*
* We assume the user is really more interested in the second argument
* ("newer" version). To that end, we print the output in the order of
* the RHS (the `b` parameter). To put the LHS (the `a` parameter)
* commits that are no longer in the RHS into a good place, we place
* them once we have shown all of their predecessors in the LHS.
*/
while (i < a->nr || j < b->nr) {
struct patch_util *a_util, *b_util;
a_util = i < a->nr ? a->items[i].util : NULL;
b_util = j < b->nr ? b->items[j].util : NULL;
/* Skip all the already-shown commits from the LHS. */
while (i < a->nr && a_util->shown)
a_util = ++i < a->nr ? a->items[i].util : NULL;
/* Show unmatched LHS commit whose predecessors were shown. */
if (i < a->nr && a_util->matching < 0) {
if (!range_diff_opts->right_only)
output_pair_header(&opts, patch_no_width,
&buf, &dashes, a_util, NULL);
i++;
continue;
}
/* Show unmatched RHS commits. */
while (j < b->nr && b_util->matching < 0) {
if (!range_diff_opts->left_only)
output_pair_header(&opts, patch_no_width,
&buf, &dashes, NULL, b_util);
b_util = ++j < b->nr ? b->items[j].util : NULL;
}
/* Show matching LHS/RHS pair. */
if (j < b->nr) {
a_util = a->items[b_util->matching].util;
output_pair_header(&opts, patch_no_width,
&buf, &dashes, a_util, b_util);
if (!(opts.output_format & DIFF_FORMAT_NO_OUTPUT))
range-diff: also show the diff between patches Just like tbdiff, we now show the diff between matching patches. This is a "diff of two diffs", so it can be a bit daunting to read for the beginner. An alternative would be to display an interdiff, i.e. the hypothetical diff which is the result of first reverting the old diff and then applying the new diff. Especially when rebasing frequently, an interdiff is often not feasible, though: if the old diff cannot be applied in reverse (due to a moving upstream), an interdiff can simply not be inferred. This commit brings `range-diff` closer to feature parity with regard to tbdiff. To make `git range-diff` respect e.g. color.diff.* settings, we have to adjust git_branch_config() accordingly. Note: while we now parse diff options such as --color, the effect is not yet the same as in tbdiff, where also the commit pairs would be colored. This is left for a later commit. Note also: while tbdiff accepts the `--no-patches` option to suppress these diffs between patches, we prefer the `-s` (or `--no-patch`) option that is automatically supported via our use of diff_opt_parse(). And finally note: to support diff options, we have to call `parse_options()` such that it keeps unknown options, and then loop over those and let `diff_opt_parse()` handle them. After that loop, we have to call `parse_options()` again, to make sure that no unknown options are left. Helped-by: Thomas Gummerer <t.gummerer@gmail.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-13 11:33:07 +00:00
patch_diff(a->items[b_util->matching].string,
b->items[j].string, &opts);
a_util->shown = 1;
j++;
}
}
strbuf_release(&buf);
strbuf_release(&dashes);
strbuf_release(&indent);
opts.no_free = 0;
diff_free(&opts);
}
int show_range_diff(const char *range1, const char *range2,
struct range_diff_options *range_diff_opts)
{
int res = 0;
struct string_list branch1 = STRING_LIST_INIT_DUP;
struct string_list branch2 = STRING_LIST_INIT_DUP;
if (range_diff_opts->left_only && range_diff_opts->right_only)
res = error(_("options '%s' and '%s' cannot be used together"), "--left-only", "--right-only");
if (!res && read_patches(range1, &branch1, range_diff_opts->other_arg))
res = error(_("could not parse log for '%s'"), range1);
if (!res && read_patches(range2, &branch2, range_diff_opts->other_arg))
res = error(_("could not parse log for '%s'"), range2);
if (!res) {
find_exact_matches(&branch1, &branch2);
get_correspondences(&branch1, &branch2,
range_diff_opts->creation_factor);
output(&branch1, &branch2, range_diff_opts);
}
string_list_clear(&branch1, 1);
string_list_clear(&branch2, 1);
return res;
}
int is_range_diff_range(const char *arg)
{
char *copy = xstrdup(arg); /* setup_revisions() modifies it */
const char *argv[] = { "", copy, "--", NULL };
int i, positive = 0, negative = 0;
struct rev_info revs;
repo_init_revisions(the_repository, &revs, NULL);
if (setup_revisions(3, argv, &revs, NULL) == 1) {
for (i = 0; i < revs.pending.nr; i++)
if (revs.pending.objects[i].item->flags & UNINTERESTING)
negative++;
else
positive++;
for (i = 0; i < revs.pending.nr; i++) {
struct object *obj = revs.pending.objects[i].item;
if (obj->type == OBJ_COMMIT)
clear_commit_marks((struct commit *)obj,
ALL_REV_FLAGS);
}
}
free(copy);
revision.[ch]: provide and start using a release_revisions() The users of the revision.[ch] API's "struct rev_info" are a major source of memory leaks in the test suite under SANITIZE=leak, which in turn adds a lot of noise when trying to mark up tests with "TEST_PASSES_SANITIZE_LEAK=true". The users of that API are largely one-shot, e.g. "git rev-list" or "git log", or the "git checkout" and "git stash" being modified here For these callers freeing the memory is arguably a waste of time, but in many cases they've actually been trying to free the memory, and just doing that in a buggy manner. Let's provide a release_revisions() function for these users, and start migrating them over per the plan outlined in [1]. Right now this only handles the "pending" member of the struct, but more will be added in subsequent commits. Even though we only clear the "pending" member now, let's not leave a trap in code like the pre-image of index_differs_from(), where we'd start doing the wrong thing as soon as the release_revisions() learned to clear its "diffopt". I.e. we need to call release_revisions() after we've inspected any state in "struct rev_info". This leaves in place e.g. clear_pathspec(&rev.prune_data) in stash_working_tree() in builtin/stash.c, subsequent commits will teach release_revisions() to free "prune_data" and other members that in some cases are individually cleared by users of "struct rev_info" by reaching into its members. Those subsequent commits will remove the relevant calls to e.g. clear_pathspec(). We avoid amending code in index_differs_from() in diff-lib.c as well as wt_status_collect_changes_index(), has_unstaged_changes() and has_uncommitted_changes() in wt-status.c in a way that assumes that we are already clearing the "diffopt" member. That will be handled in a subsequent commit. 1. https://lore.kernel.org/git/87a6k8daeu.fsf@evledraar.gmail.com/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-04-13 20:01:35 +00:00
release_revisions(&revs);
return negative > 0 && positive > 0;
}