git/midx.c

2139 lines
55 KiB
C
Raw Normal View History

#include "git-compat-util.h"
#include "abspath.h"
#include "config.h"
#include "csum-file.h"
#include "dir.h"
#include "gettext.h"
#include "hex.h"
#include "lockfile.h"
#include "packfile.h"
#include "object-file.h"
#include "object-store-ll.h"
#include "hash-lookup.h"
#include "midx.h"
#include "progress.h"
#include "trace2.h"
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
#include "run-command.h"
#include "repository.h"
#include "chunk-format.h"
#include "pack.h"
#include "pack-bitmap.h"
#include "refs.h"
#include "revision.h"
#include "list-objects.h"
#define MIDX_SIGNATURE 0x4d494458 /* "MIDX" */
#define MIDX_VERSION 1
#define MIDX_BYTE_FILE_VERSION 4
#define MIDX_BYTE_HASH_VERSION 5
#define MIDX_BYTE_NUM_CHUNKS 6
#define MIDX_BYTE_NUM_PACKS 8
#define MIDX_HEADER_SIZE 12
#define MIDX_MIN_SIZE (MIDX_HEADER_SIZE + the_hash_algo->rawsz)
#define MIDX_CHUNK_ALIGNMENT 4
#define MIDX_CHUNKID_PACKNAMES 0x504e414d /* "PNAM" */
#define MIDX_CHUNKID_OIDFANOUT 0x4f494446 /* "OIDF" */
#define MIDX_CHUNKID_OIDLOOKUP 0x4f49444c /* "OIDL" */
#define MIDX_CHUNKID_OBJECTOFFSETS 0x4f4f4646 /* "OOFF" */
#define MIDX_CHUNKID_LARGEOFFSETS 0x4c4f4646 /* "LOFF" */
midx.c: make changing the preferred pack safe The previous patch demonstrates a bug where a MIDX's auxiliary object order can become out of sync with a MIDX bitmap. This is because of two confounding factors: - First, the object order is stored in a file which is named according to the multi-pack index's checksum, and the MIDX does not store the object order. This means that the object order can change without altering the checksum. - But the .rev file is moved into place with finalize_object_file(), which link(2)'s the file into place instead of renaming it. For us, that means that a modified .rev file will not be moved into place if MIDX's checksum was unchanged. This fix is to force the MIDX's checksum to change when the preferred pack changes but the set of packs contained in the MIDX does not. In other words, when the object order changes, the MIDX's checksum needs to change with it (regardless of whether the MIDX is tracking the same or different packs). This prevents a race whereby changing the object order (but not the packs themselves) enables a reader to see the new .rev file with the old MIDX, or similarly seeing the new bitmap with the old object order. But why can't we just stop hardlinking the .rev into place instead adding additional data to the MIDX? Suppose that's what we did. Then when we go to generate the new bitmap, we'll load the old MIDX bitmap, along with the MIDX that it references. That's fine, since the new MIDX isn't moved into place until after the new bitmap is generated. But the new object order *has* been moved into place. So we'll read the old bitmaps in the new order when generating the new bitmap file, meaning that without this secondary change, bitmap generation itself would become a victim of the race described here. This can all be prevented by forcing the MIDX's checksum to change when the object order does. By embedding the entire object order into the MIDX, we do just that. That is, the MIDX's checksum will change in response to any perturbation of the underlying object order. In t5326, this will cause the MIDX's checksum to update (even without changing the set of packs in the MIDX), preventing the stale read problem. Note that this makes it safe to continue to link(2) the MIDX .rev file into place, since it is now impossible to have a .rev file that is out-of-sync with the MIDX whose checksum it references. (But we will do away with MIDX .rev files later in this series anyway, so this is somewhat of a moot point). In theory, it is possible to store a "fingerprint" of the full object order here, so long as that fingerprint changes at least as often as the full object order does. Some possibilities here include storing the identity of the preferred pack, along with the mtimes of the non-preferred packs in a consistent order. But storing a limited part of the information makes it difficult to reason about whether or not there are gaps between the two that would cause us to get bitten by this bug again. Signed-off-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:03 +00:00
#define MIDX_CHUNKID_REVINDEX 0x52494458 /* "RIDX" */
#define MIDX_CHUNK_FANOUT_SIZE (sizeof(uint32_t) * 256)
#define MIDX_CHUNK_OFFSET_WIDTH (2 * sizeof(uint32_t))
#define MIDX_CHUNK_LARGE_OFFSET_WIDTH (sizeof(uint64_t))
#define MIDX_LARGE_OFFSET_NEEDED 0x80000000
#define PACK_EXPIRED UINT_MAX
const unsigned char *get_midx_checksum(struct multi_pack_index *m)
pack-revindex: read multi-pack reverse indexes Implement reading for multi-pack reverse indexes, as described in the previous patch. Note that these functions don't yet have any callers, and won't until multi-pack reachability bitmaps are introduced in a later patch series. In the meantime, this patch implements some of the infrastructure necessary to support multi-pack bitmaps. There are three new functions exposed by the revindex API: - load_midx_revindex(): loads the reverse index corresponding to the given multi-pack index. - midx_to_pack_pos() and pack_pos_to_midx(): these convert between the multi-pack index and pseudo-pack order. load_midx_revindex() and pack_pos_to_midx() are both relatively straightforward. load_midx_revindex() needs a few functions to be exposed from the midx API. One to get the checksum of a midx, and another to get the .rev's filename. Similar to recent changes in the packed_git struct, three new fields are added to the multi_pack_index struct: one to keep track of the size, one to keep track of the mmap'd pointer, and another to point past the header and at the reverse index's data. pack_pos_to_midx() simply reads the corresponding entry out of the table. midx_to_pack_pos() is the trickiest, since it needs to find an object's position in the psuedo-pack order, but that order can only be recovered in the .rev file itself. This mapping can be implemented with a binary search, but note that the thing we're binary searching over isn't an array of values, but rather a permuted order of those values. So, when comparing two items, it's helpful to keep in mind the difference. Instead of a traditional binary search, where you are comparing two things directly, here we're comparing a (pack, offset) tuple with an index into the multi-pack index. That index describes another (pack, offset) tuple, and it is _those_ two tuples that are compared. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-03-30 15:04:26 +00:00
{
return m->data + m->data_len - the_hash_algo->rawsz;
}
void get_midx_filename(struct strbuf *out, const char *object_dir)
{
strbuf_addf(out, "%s/pack/multi-pack-index", object_dir);
}
void get_midx_rev_filename(struct strbuf *out, struct multi_pack_index *m)
pack-revindex: read multi-pack reverse indexes Implement reading for multi-pack reverse indexes, as described in the previous patch. Note that these functions don't yet have any callers, and won't until multi-pack reachability bitmaps are introduced in a later patch series. In the meantime, this patch implements some of the infrastructure necessary to support multi-pack bitmaps. There are three new functions exposed by the revindex API: - load_midx_revindex(): loads the reverse index corresponding to the given multi-pack index. - midx_to_pack_pos() and pack_pos_to_midx(): these convert between the multi-pack index and pseudo-pack order. load_midx_revindex() and pack_pos_to_midx() are both relatively straightforward. load_midx_revindex() needs a few functions to be exposed from the midx API. One to get the checksum of a midx, and another to get the .rev's filename. Similar to recent changes in the packed_git struct, three new fields are added to the multi_pack_index struct: one to keep track of the size, one to keep track of the mmap'd pointer, and another to point past the header and at the reverse index's data. pack_pos_to_midx() simply reads the corresponding entry out of the table. midx_to_pack_pos() is the trickiest, since it needs to find an object's position in the psuedo-pack order, but that order can only be recovered in the .rev file itself. This mapping can be implemented with a binary search, but note that the thing we're binary searching over isn't an array of values, but rather a permuted order of those values. So, when comparing two items, it's helpful to keep in mind the difference. Instead of a traditional binary search, where you are comparing two things directly, here we're comparing a (pack, offset) tuple with an index into the multi-pack index. That index describes another (pack, offset) tuple, and it is _those_ two tuples that are compared. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-03-30 15:04:26 +00:00
{
get_midx_filename(out, m->object_dir);
strbuf_addf(out, "-%s.rev", hash_to_hex(get_midx_checksum(m)));
pack-revindex: read multi-pack reverse indexes Implement reading for multi-pack reverse indexes, as described in the previous patch. Note that these functions don't yet have any callers, and won't until multi-pack reachability bitmaps are introduced in a later patch series. In the meantime, this patch implements some of the infrastructure necessary to support multi-pack bitmaps. There are three new functions exposed by the revindex API: - load_midx_revindex(): loads the reverse index corresponding to the given multi-pack index. - midx_to_pack_pos() and pack_pos_to_midx(): these convert between the multi-pack index and pseudo-pack order. load_midx_revindex() and pack_pos_to_midx() are both relatively straightforward. load_midx_revindex() needs a few functions to be exposed from the midx API. One to get the checksum of a midx, and another to get the .rev's filename. Similar to recent changes in the packed_git struct, three new fields are added to the multi_pack_index struct: one to keep track of the size, one to keep track of the mmap'd pointer, and another to point past the header and at the reverse index's data. pack_pos_to_midx() simply reads the corresponding entry out of the table. midx_to_pack_pos() is the trickiest, since it needs to find an object's position in the psuedo-pack order, but that order can only be recovered in the .rev file itself. This mapping can be implemented with a binary search, but note that the thing we're binary searching over isn't an array of values, but rather a permuted order of those values. So, when comparing two items, it's helpful to keep in mind the difference. Instead of a traditional binary search, where you are comparing two things directly, here we're comparing a (pack, offset) tuple with an index into the multi-pack index. That index describes another (pack, offset) tuple, and it is _those_ two tuples that are compared. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-03-30 15:04:26 +00:00
}
static int midx_read_oid_fanout(const unsigned char *chunk_start,
size_t chunk_size, void *data)
{
int i;
struct multi_pack_index *m = data;
m->chunk_oid_fanout = (uint32_t *)chunk_start;
if (chunk_size != 4 * 256) {
error(_("multi-pack-index OID fanout is of the wrong size"));
return 1;
}
for (i = 0; i < 255; i++) {
uint32_t oid_fanout1 = ntohl(m->chunk_oid_fanout[i]);
uint32_t oid_fanout2 = ntohl(m->chunk_oid_fanout[i+1]);
if (oid_fanout1 > oid_fanout2) {
error(_("oid fanout out of order: fanout[%d] = %"PRIx32" > %"PRIx32" = fanout[%d]"),
i, oid_fanout1, oid_fanout2, i + 1);
return 1;
}
}
m->num_objects = ntohl(m->chunk_oid_fanout[255]);
return 0;
}
static int midx_read_oid_lookup(const unsigned char *chunk_start,
size_t chunk_size, void *data)
{
struct multi_pack_index *m = data;
m->chunk_oid_lookup = chunk_start;
if (chunk_size != st_mult(m->hash_len, m->num_objects)) {
error(_("multi-pack-index OID lookup chunk is the wrong size"));
return 1;
}
return 0;
}
static int midx_read_object_offsets(const unsigned char *chunk_start,
size_t chunk_size, void *data)
{
struct multi_pack_index *m = data;
m->chunk_object_offsets = chunk_start;
if (chunk_size != st_mult(m->num_objects, MIDX_CHUNK_OFFSET_WIDTH)) {
error(_("multi-pack-index object offset chunk is the wrong size"));
return 1;
}
return 0;
}
struct multi_pack_index *load_multi_pack_index(const char *object_dir, int local)
{
struct multi_pack_index *m = NULL;
int fd;
struct stat st;
size_t midx_size;
void *midx_map = NULL;
uint32_t hash_version;
struct strbuf midx_name = STRBUF_INIT;
uint32_t i;
const char *cur_pack_name;
struct chunkfile *cf = NULL;
get_midx_filename(&midx_name, object_dir);
fd = git_open(midx_name.buf);
if (fd < 0)
goto cleanup_fail;
if (fstat(fd, &st)) {
error_errno(_("failed to read %s"), midx_name.buf);
goto cleanup_fail;
}
midx_size = xsize_t(st.st_size);
if (midx_size < MIDX_MIN_SIZE) {
error(_("multi-pack-index file %s is too small"), midx_name.buf);
goto cleanup_fail;
}
strbuf_release(&midx_name);
midx_map = xmmap(NULL, midx_size, PROT_READ, MAP_PRIVATE, fd, 0);
close(fd);
FLEX_ALLOC_STR(m, object_dir, object_dir);
m->data = midx_map;
m->data_len = midx_size;
m->local = local;
m->signature = get_be32(m->data);
if (m->signature != MIDX_SIGNATURE)
die(_("multi-pack-index signature 0x%08x does not match signature 0x%08x"),
m->signature, MIDX_SIGNATURE);
m->version = m->data[MIDX_BYTE_FILE_VERSION];
if (m->version != MIDX_VERSION)
die(_("multi-pack-index version %d not recognized"),
m->version);
hash_version = m->data[MIDX_BYTE_HASH_VERSION];
if (hash_version != oid_version(the_hash_algo)) {
multi-pack-index: use hash version byte Similar to the commit-graph format, the multi-pack-index format has a byte in the header intended to track the hash version used to write the file. This allows one to interpret the hash length without having the context of the repository config specifying the hash length. This was not modified as part of the SHA-256 work because the hash length was automatically up-shifted due to that config. Since we have this byte available, we can make the file formats more obviously incompatible instead of relying on other context from the repository. Add a new oid_version() method in midx.c similar to the one in commit-graph.c. This is specifically made separate from that implementation to avoid artificially linking the formats. The test impact requires a few more things than the corresponding change in the commit-graph format. Specifically, 'test-tool read-midx' was not writing anything about this header value to output. Since the value available in 'struct multi_pack_index' is hash_len instead of a version value, we output "20" or "32" instead of "1" or "2". Since we want a user to not have their Git commands fail if their multi-pack-index has the incorrect hash version compared to the repository's hash version, we relax the die() to an error() in load_multi_pack_index(). This has some effect on 'git multi-pack-index verify' as we need to check that a failed parse of a file that exists is actually a verify error. For that test that checks the hash version matches, we change the corrupted byte from "2" to "3" to ensure the test fails for both hash algorithms. Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-17 14:04:48 +00:00
error(_("multi-pack-index hash version %u does not match version %u"),
hash_version, oid_version(the_hash_algo));
multi-pack-index: use hash version byte Similar to the commit-graph format, the multi-pack-index format has a byte in the header intended to track the hash version used to write the file. This allows one to interpret the hash length without having the context of the repository config specifying the hash length. This was not modified as part of the SHA-256 work because the hash length was automatically up-shifted due to that config. Since we have this byte available, we can make the file formats more obviously incompatible instead of relying on other context from the repository. Add a new oid_version() method in midx.c similar to the one in commit-graph.c. This is specifically made separate from that implementation to avoid artificially linking the formats. The test impact requires a few more things than the corresponding change in the commit-graph format. Specifically, 'test-tool read-midx' was not writing anything about this header value to output. Since the value available in 'struct multi_pack_index' is hash_len instead of a version value, we output "20" or "32" instead of "1" or "2". Since we want a user to not have their Git commands fail if their multi-pack-index has the incorrect hash version compared to the repository's hash version, we relax the die() to an error() in load_multi_pack_index(). This has some effect on 'git multi-pack-index verify' as we need to check that a failed parse of a file that exists is actually a verify error. For that test that checks the hash version matches, we change the corrupted byte from "2" to "3" to ensure the test fails for both hash algorithms. Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-17 14:04:48 +00:00
goto cleanup_fail;
}
m->hash_len = the_hash_algo->rawsz;
m->num_chunks = m->data[MIDX_BYTE_NUM_CHUNKS];
m->num_packs = get_be32(m->data + MIDX_BYTE_NUM_PACKS);
cf = init_chunkfile(NULL);
if (read_table_of_contents(cf, m->data, midx_size,
midx: enforce chunk alignment on reading The midx reader assumes chunks are aligned to a 4-byte boundary: we treat the fanout chunk as an array of uint32_t, indexing it to feed the results to ntohl(). Without aligning the chunks, we may violate the CPU's alignment constraints. Though many platforms allow this, some do not. And certanily UBSan will complain, since it is undefined behavior. Even though most chunks are naturally 4-byte-aligned (because they are storing uint32_t or larger types), PNAM is not. It stores NUL-terminated pack names, so you can have a valid chunk with any length. The writing side handles this by 4-byte-aligning the chunk, introducing a few extra NULs as necessary. But since we don't check this on the reading side, we may end up with a misaligned fanout and trigger the undefined behavior. We have two options here: 1. Swap out ntohl(fanout[i]) for get_be32(fanout+i) everywhere. The latter handles alignment itself. It's possible that it's slightly slower (though in practice I'm not sure how true that is, especially for these code paths which then go on to do a binary search). 2. Enforce the alignment when reading the chunks. This is easy to do, since the table-of-contents reader can check it in one spot. I went with the second option here, just because it places less burden on maintenance going forward (it is OK to continue using ntohl), and we know it can't have any performance impact on the actual reads. The commit-graph code uses the same chunk API. It's usually also 4-byte aligned, but some chunks are not (like Bloom filter BDAT chunks). So we'll pass "1" here to allow any alignment. It doesn't suffer from the same problem as midx with its fanout because the fanout chunk is always the first (and the rest of the format dictates that the first chunk will start aligned). The new test shows the effect on a midx with a misaligned PNAM chunk. Note that the midx-reading code treats chunk-toc errors as soft, falling back to the non-midx path rather than calling die(), as we do for other parsing errors. Arguably we should make all of these behave the same, but that's out of scope for this patch. For now the test just expects the fallback behavior. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2023-10-09 21:05:23 +00:00
MIDX_HEADER_SIZE, m->num_chunks,
MIDX_CHUNK_ALIGNMENT))
goto cleanup_fail;
if (pair_chunk(cf, MIDX_CHUNKID_PACKNAMES, &m->chunk_pack_names, &m->chunk_pack_names_len))
die(_("multi-pack-index required pack-name chunk missing or corrupted"));
if (read_chunk(cf, MIDX_CHUNKID_OIDFANOUT, midx_read_oid_fanout, m))
die(_("multi-pack-index required OID fanout chunk missing or corrupted"));
if (read_chunk(cf, MIDX_CHUNKID_OIDLOOKUP, midx_read_oid_lookup, m))
die(_("multi-pack-index required OID lookup chunk missing or corrupted"));
if (read_chunk(cf, MIDX_CHUNKID_OBJECTOFFSETS, midx_read_object_offsets, m))
die(_("multi-pack-index required object offsets chunk missing or corrupted"));
pair_chunk(cf, MIDX_CHUNKID_LARGEOFFSETS, &m->chunk_large_offsets,
&m->chunk_large_offsets_len);
midx: read `RIDX` chunk when present When a MIDX contains the new `RIDX` chunk, ensure that the reverse index is read from it instead of the on-disk .rev file. Since we need to encode the object order in the MIDX itself for correctness reasons, there is no point in storing the same data again outside of the MIDX. So, this patch stops writing separate .rev files, and reads it out of the MIDX itself. This is possible to do with relatively little new code, since the format of the RIDX chunk is identical to the data in the .rev file. In other words, we can implement this by pointing the `revindex_data` field at the reverse index chunk of the MIDX instead of the .rev file without any other changes. Note that we have two knobs that are adjusted for the new tests: GIT_TEST_MIDX_WRITE_REV and GIT_TEST_MIDX_READ_RIDX. The former controls whether the MIDX .rev is written at all, and the latter controls whether we read the MIDX's RIDX chunk. Both are necessary to ensure that the test added at the beginning of this series continues to work. This is because we always need to write the RIDX chunk in the MIDX in order to change its checksum, but we want to make sure reading the existing .rev file still works (since the RIDX chunk takes precedence by default). Arguably this isn't a very interesting mode to test, because the precedence rules mean that we'll always read the RIDX chunk over the .rev file. But it makes it impossible for a user to induce corruption in their repository by adjusting the test knobs (since if we had an either/or knob they could stop writing the RIDX chunk, allowing them to tweak the MIDX's object order without changing its checksum). Signed-off-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:17 +00:00
if (git_env_bool("GIT_TEST_MIDX_READ_RIDX", 1))
pair_chunk(cf, MIDX_CHUNKID_REVINDEX, &m->chunk_revindex,
&m->chunk_revindex_len);
midx: read `RIDX` chunk when present When a MIDX contains the new `RIDX` chunk, ensure that the reverse index is read from it instead of the on-disk .rev file. Since we need to encode the object order in the MIDX itself for correctness reasons, there is no point in storing the same data again outside of the MIDX. So, this patch stops writing separate .rev files, and reads it out of the MIDX itself. This is possible to do with relatively little new code, since the format of the RIDX chunk is identical to the data in the .rev file. In other words, we can implement this by pointing the `revindex_data` field at the reverse index chunk of the MIDX instead of the .rev file without any other changes. Note that we have two knobs that are adjusted for the new tests: GIT_TEST_MIDX_WRITE_REV and GIT_TEST_MIDX_READ_RIDX. The former controls whether the MIDX .rev is written at all, and the latter controls whether we read the MIDX's RIDX chunk. Both are necessary to ensure that the test added at the beginning of this series continues to work. This is because we always need to write the RIDX chunk in the MIDX in order to change its checksum, but we want to make sure reading the existing .rev file still works (since the RIDX chunk takes precedence by default). Arguably this isn't a very interesting mode to test, because the precedence rules mean that we'll always read the RIDX chunk over the .rev file. But it makes it impossible for a user to induce corruption in their repository by adjusting the test knobs (since if we had an either/or knob they could stop writing the RIDX chunk, allowing them to tweak the MIDX's object order without changing its checksum). Signed-off-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:17 +00:00
CALLOC_ARRAY(m->pack_names, m->num_packs);
CALLOC_ARRAY(m->packs, m->num_packs);
cur_pack_name = (const char *)m->chunk_pack_names;
for (i = 0; i < m->num_packs; i++) {
const char *end;
size_t avail = m->chunk_pack_names_len -
(cur_pack_name - (const char *)m->chunk_pack_names);
m->pack_names[i] = cur_pack_name;
end = memchr(cur_pack_name, '\0', avail);
if (!end)
die(_("multi-pack-index pack-name chunk is too short"));
cur_pack_name = end + 1;
if (i && strcmp(m->pack_names[i], m->pack_names[i - 1]) <= 0)
die(_("multi-pack-index pack names out of order: '%s' before '%s'"),
m->pack_names[i - 1],
m->pack_names[i]);
}
trace2_data_intmax("midx", the_repository, "load/num_packs", m->num_packs);
trace2_data_intmax("midx", the_repository, "load/num_objects", m->num_objects);
free_chunkfile(cf);
return m;
cleanup_fail:
free(m);
strbuf_release(&midx_name);
free_chunkfile(cf);
if (midx_map)
munmap(midx_map, midx_size);
if (0 <= fd)
close(fd);
return NULL;
}
void close_midx(struct multi_pack_index *m)
{
uint32_t i;
if (!m)
return;
close_midx(m->next);
munmap((unsigned char *)m->data, m->data_len);
for (i = 0; i < m->num_packs; i++) {
midx: add packs to packed_git linked list The multi-pack-index allows searching for objects across multiple packs using one object list. The original design gains many of these performance benefits by keeping the packs in the multi-pack-index out of the packed_git list. Unfortunately, this has one major drawback. If the multi-pack-index covers thousands of packs, and a command loads many of those packs, then we can hit the limit for open file descriptors. The close_one_pack() method is used to limit this resource, but it only looks at the packed_git list, and uses an LRU cache to prevent thrashing. Instead of complicating this close_one_pack() logic to include direct references to the multi-pack-index, simply add the packs opened by the multi-pack-index to the packed_git list. This immediately solves the file-descriptor limit problem, but requires some extra steps to avoid performance issues or other problems: 1. Create a multi_pack_index bit in the packed_git struct that is one if and only if the pack was loaded from a multi-pack-index. 2. Skip packs with the multi_pack_index bit when doing object lookups and abbreviations. These algorithms already check the multi-pack-index before the packed_git struct. This has a very small performance hit, as we need to walk more packed_git structs. This is acceptable, since these operations run binary search on the other packs, so this walk-and-ignore logic is very fast by comparison. 3. When closing a multi-pack-index file, do not close its packs, as those packs will be closed using close_all_packs(). In some cases, such as 'git repack', we run 'close_midx()' without also closing the packs, so we need to un-set the multi_pack_index bit in those packs. This is necessary, and caught by running t6501-freshen-objects.sh with GIT_TEST_MULTI_PACK_INDEX=1. To manually test this change, I inserted trace2 logging into close_pack_fd() and set pack_max_fds to 10, then ran 'git rev-list --all --objects' on a copy of the Git repo with 300+ pack-files and a multi-pack-index. The logs verified the packs are closed as we read them beyond the file descriptor limit. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-29 16:18:56 +00:00
if (m->packs[i])
m->packs[i]->multi_pack_index = 0;
}
FREE_AND_NULL(m->packs);
FREE_AND_NULL(m->pack_names);
free(m);
}
int prepare_midx_pack(struct repository *r, struct multi_pack_index *m, uint32_t pack_int_id)
{
struct strbuf pack_name = STRBUF_INIT;
midx: add packs to packed_git linked list The multi-pack-index allows searching for objects across multiple packs using one object list. The original design gains many of these performance benefits by keeping the packs in the multi-pack-index out of the packed_git list. Unfortunately, this has one major drawback. If the multi-pack-index covers thousands of packs, and a command loads many of those packs, then we can hit the limit for open file descriptors. The close_one_pack() method is used to limit this resource, but it only looks at the packed_git list, and uses an LRU cache to prevent thrashing. Instead of complicating this close_one_pack() logic to include direct references to the multi-pack-index, simply add the packs opened by the multi-pack-index to the packed_git list. This immediately solves the file-descriptor limit problem, but requires some extra steps to avoid performance issues or other problems: 1. Create a multi_pack_index bit in the packed_git struct that is one if and only if the pack was loaded from a multi-pack-index. 2. Skip packs with the multi_pack_index bit when doing object lookups and abbreviations. These algorithms already check the multi-pack-index before the packed_git struct. This has a very small performance hit, as we need to walk more packed_git structs. This is acceptable, since these operations run binary search on the other packs, so this walk-and-ignore logic is very fast by comparison. 3. When closing a multi-pack-index file, do not close its packs, as those packs will be closed using close_all_packs(). In some cases, such as 'git repack', we run 'close_midx()' without also closing the packs, so we need to un-set the multi_pack_index bit in those packs. This is necessary, and caught by running t6501-freshen-objects.sh with GIT_TEST_MULTI_PACK_INDEX=1. To manually test this change, I inserted trace2 logging into close_pack_fd() and set pack_max_fds to 10, then ran 'git rev-list --all --objects' on a copy of the Git repo with 300+ pack-files and a multi-pack-index. The logs verified the packs are closed as we read them beyond the file descriptor limit. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-29 16:18:56 +00:00
struct packed_git *p;
if (pack_int_id >= m->num_packs)
die(_("bad pack-int-id: %u (%u total packs)"),
pack_int_id, m->num_packs);
if (m->packs[pack_int_id])
return 0;
strbuf_addf(&pack_name, "%s/pack/%s", m->object_dir,
m->pack_names[pack_int_id]);
midx: add packs to packed_git linked list The multi-pack-index allows searching for objects across multiple packs using one object list. The original design gains many of these performance benefits by keeping the packs in the multi-pack-index out of the packed_git list. Unfortunately, this has one major drawback. If the multi-pack-index covers thousands of packs, and a command loads many of those packs, then we can hit the limit for open file descriptors. The close_one_pack() method is used to limit this resource, but it only looks at the packed_git list, and uses an LRU cache to prevent thrashing. Instead of complicating this close_one_pack() logic to include direct references to the multi-pack-index, simply add the packs opened by the multi-pack-index to the packed_git list. This immediately solves the file-descriptor limit problem, but requires some extra steps to avoid performance issues or other problems: 1. Create a multi_pack_index bit in the packed_git struct that is one if and only if the pack was loaded from a multi-pack-index. 2. Skip packs with the multi_pack_index bit when doing object lookups and abbreviations. These algorithms already check the multi-pack-index before the packed_git struct. This has a very small performance hit, as we need to walk more packed_git structs. This is acceptable, since these operations run binary search on the other packs, so this walk-and-ignore logic is very fast by comparison. 3. When closing a multi-pack-index file, do not close its packs, as those packs will be closed using close_all_packs(). In some cases, such as 'git repack', we run 'close_midx()' without also closing the packs, so we need to un-set the multi_pack_index bit in those packs. This is necessary, and caught by running t6501-freshen-objects.sh with GIT_TEST_MULTI_PACK_INDEX=1. To manually test this change, I inserted trace2 logging into close_pack_fd() and set pack_max_fds to 10, then ran 'git rev-list --all --objects' on a copy of the Git repo with 300+ pack-files and a multi-pack-index. The logs verified the packs are closed as we read them beyond the file descriptor limit. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-29 16:18:56 +00:00
p = add_packed_git(pack_name.buf, pack_name.len, m->local);
strbuf_release(&pack_name);
midx: add packs to packed_git linked list The multi-pack-index allows searching for objects across multiple packs using one object list. The original design gains many of these performance benefits by keeping the packs in the multi-pack-index out of the packed_git list. Unfortunately, this has one major drawback. If the multi-pack-index covers thousands of packs, and a command loads many of those packs, then we can hit the limit for open file descriptors. The close_one_pack() method is used to limit this resource, but it only looks at the packed_git list, and uses an LRU cache to prevent thrashing. Instead of complicating this close_one_pack() logic to include direct references to the multi-pack-index, simply add the packs opened by the multi-pack-index to the packed_git list. This immediately solves the file-descriptor limit problem, but requires some extra steps to avoid performance issues or other problems: 1. Create a multi_pack_index bit in the packed_git struct that is one if and only if the pack was loaded from a multi-pack-index. 2. Skip packs with the multi_pack_index bit when doing object lookups and abbreviations. These algorithms already check the multi-pack-index before the packed_git struct. This has a very small performance hit, as we need to walk more packed_git structs. This is acceptable, since these operations run binary search on the other packs, so this walk-and-ignore logic is very fast by comparison. 3. When closing a multi-pack-index file, do not close its packs, as those packs will be closed using close_all_packs(). In some cases, such as 'git repack', we run 'close_midx()' without also closing the packs, so we need to un-set the multi_pack_index bit in those packs. This is necessary, and caught by running t6501-freshen-objects.sh with GIT_TEST_MULTI_PACK_INDEX=1. To manually test this change, I inserted trace2 logging into close_pack_fd() and set pack_max_fds to 10, then ran 'git rev-list --all --objects' on a copy of the Git repo with 300+ pack-files and a multi-pack-index. The logs verified the packs are closed as we read them beyond the file descriptor limit. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-04-29 16:18:56 +00:00
if (!p)
return 1;
p->multi_pack_index = 1;
m->packs[pack_int_id] = p;
install_packed_git(r, p);
list_add_tail(&p->mru, &r->objects->packed_git_mru);
return 0;
}
int bsearch_midx(const struct object_id *oid, struct multi_pack_index *m, uint32_t *result)
{
return bsearch_hash(oid->hash, m->chunk_oid_fanout, m->chunk_oid_lookup,
the_hash_algo->rawsz, result);
}
struct object_id *nth_midxed_object_oid(struct object_id *oid,
struct multi_pack_index *m,
uint32_t n)
{
if (n >= m->num_objects)
return NULL;
oidread(oid, m->chunk_oid_lookup + st_mult(m->hash_len, n));
return oid;
}
off_t nth_midxed_offset(struct multi_pack_index *m, uint32_t pos)
{
const unsigned char *offset_data;
uint32_t offset32;
offset_data = m->chunk_object_offsets + (off_t)pos * MIDX_CHUNK_OFFSET_WIDTH;
offset32 = get_be32(offset_data + sizeof(uint32_t));
if (m->chunk_large_offsets && offset32 & MIDX_LARGE_OFFSET_NEEDED) {
if (sizeof(off_t) < sizeof(uint64_t))
die(_("multi-pack-index stores a 64-bit offset, but off_t is too small"));
offset32 ^= MIDX_LARGE_OFFSET_NEEDED;
if (offset32 >= m->chunk_large_offsets_len / sizeof(uint64_t))
die(_("multi-pack-index large offset out of bounds"));
return get_be64(m->chunk_large_offsets + sizeof(uint64_t) * offset32);
}
return offset32;
}
uint32_t nth_midxed_pack_int_id(struct multi_pack_index *m, uint32_t pos)
{
return get_be32(m->chunk_object_offsets +
(off_t)pos * MIDX_CHUNK_OFFSET_WIDTH);
}
int fill_midx_entry(struct repository *r,
const struct object_id *oid,
struct pack_entry *e,
struct multi_pack_index *m)
{
uint32_t pos;
uint32_t pack_int_id;
struct packed_git *p;
if (!bsearch_midx(oid, m, &pos))
return 0;
if (pos >= m->num_objects)
return 0;
pack_int_id = nth_midxed_pack_int_id(m, pos);
if (prepare_midx_pack(r, m, pack_int_id))
midx.c: protect against disappearing packs When a packed object is stored in a multi-pack index, but that pack has racily gone away, the MIDX code simply calls die(), when it could be returning an error to the caller, which would in turn lead to re-scanning the pack directory. A pack can racily disappear, for example, due to a simultaneous 'git repack -ad', You can also reproduce this with two terminals, where one is running: git init while true; do git commit -q --allow-empty -m foo git repack -ad git multi-pack-index write done (in effect, constantly writing new MIDXs), and the other is running: obj=$(git rev-parse HEAD) while true; do echo $obj | git cat-file --batch-check='%(objectsize:disk)' || break done That will sometimes hit the error preparing packfile from multi-pack-index message, which this patch fixes. Right now, that path to discovering a missing pack looks something like 'find_pack_entry()' calling 'fill_midx_entry()' and eventually making its way to call 'nth_midxed_pack_entry()'. 'nth_midxed_pack_entry()' already checks 'is_pack_valid()' and propagates an error if the pack is invalid. So, this works if the pack has gone away between calling 'prepare_midx_pack()' and before calling 'is_pack_valid()', but not if it disappears before then. Catch the case where the pack has already disappeared before 'prepare_midx_pack()' by returning an error in that case, too. Co-authored-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-25 17:17:33 +00:00
return 0;
p = m->packs[pack_int_id];
/*
* We are about to tell the caller where they can locate the
* requested object. We better make sure the packfile is
* still here and can be accessed before supplying that
* answer, as it may have been deleted since the MIDX was
* loaded!
*/
if (!is_pack_valid(p))
return 0;
if (oidset_size(&p->bad_objects) &&
oidset_contains(&p->bad_objects, oid))
return 0;
e->offset = nth_midxed_offset(m, pos);
e->p = p;
return 1;
}
/* Match "foo.idx" against either "foo.pack" _or_ "foo.idx". */
static int cmp_idx_or_pack_name(const char *idx_or_pack_name,
const char *idx_name)
{
/* Skip past any initial matching prefix. */
while (*idx_name && *idx_name == *idx_or_pack_name) {
idx_name++;
idx_or_pack_name++;
}
/*
* If we didn't match completely, we may have matched "pack-1234." and
* be left with "idx" and "pack" respectively, which is also OK. We do
* not have to check for "idx" and "idx", because that would have been
* a complete match (and in that case these strcmps will be false, but
* we'll correctly return 0 from the final strcmp() below.
*
* Technically this matches "fooidx" and "foopack", but we'd never have
* such names in the first place.
*/
if (!strcmp(idx_name, "idx") && !strcmp(idx_or_pack_name, "pack"))
return 0;
/*
* This not only checks for a complete match, but also orders based on
* the first non-identical character, which means our ordering will
* match a raw strcmp(). That makes it OK to use this to binary search
* a naively-sorted list.
*/
return strcmp(idx_or_pack_name, idx_name);
}
int midx_contains_pack(struct multi_pack_index *m, const char *idx_or_pack_name)
{
uint32_t first = 0, last = m->num_packs;
while (first < last) {
uint32_t mid = first + (last - first) / 2;
const char *current;
int cmp;
current = m->pack_names[mid];
cmp = cmp_idx_or_pack_name(idx_or_pack_name, current);
if (!cmp)
return 1;
if (cmp > 0) {
first = mid + 1;
continue;
}
last = mid;
}
return 0;
}
int prepare_multi_pack_index_one(struct repository *r, const char *object_dir, int local)
{
struct multi_pack_index *m;
struct multi_pack_index *m_search;
prepare_repo_settings(r);
if (!r->settings.core_multi_pack_index)
return 0;
for (m_search = r->objects->multi_pack_index; m_search; m_search = m_search->next)
if (!strcmp(object_dir, m_search->object_dir))
return 1;
m = load_multi_pack_index(object_dir, local);
if (m) {
midx: traverse the local MIDX first When a repository has an alternate object directory configured, callers can traverse through each alternate's MIDX by walking the '->next' pointer. But, when 'prepare_multi_pack_index_one()' loads multiple MIDXs, it places the new ones at the front of this pointer chain, not at the end. This can be confusing for callers such as 'git repack -ad', causing test failures like in t7700.6 with 'GIT_TEST_MULTI_PACK_INDEX=1'. The occurs when dropping a pack known to the local MIDX with alternates configured that have their own MIDX. Since the alternate's MIDX is returned via 'get_multi_pack_index()', 'midx_contains_pack()' returns true (which is correct, since it traverses through the '->next' pointer to find the MIDX in the chain that does contain the requested object). But, we call 'clear_midx_file()' on 'the_repository', which drops the MIDX at the path of the first MIDX in the chain, which (in the case of t7700.6 is the one in the alternate). This patch addresses that by: - placing the local MIDX first in the chain when calling 'prepare_multi_pack_index_one()', and - introducing a new 'get_local_multi_pack_index()', which explicitly returns the repository-local MIDX, if any. Don't impose an additional order on the MIDX's '->next' pointer beyond that the first item in the chain must be local if one exists so that we avoid a quadratic insertion. Likewise, use 'get_local_multi_pack_index()' in 'remove_redundant_pack()' to fix the formerly broken t7700.6 when run with 'GIT_TEST_MULTI_PACK_INDEX=1'. Finally, note that the MIDX ordering invariant is only preserved by the insertion order in 'prepare_packed_git()', which traverses through the ODB's '->next' pointer, meaning we visit the local object store first. This fragility makes this an undesirable long-term solution if more callers are added, but it is acceptable for now since this is the only caller. Helped-by: Jeff King <peff@peff.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-28 20:22:13 +00:00
struct multi_pack_index *mp = r->objects->multi_pack_index;
if (mp) {
m->next = mp->next;
mp->next = m;
} else
r->objects->multi_pack_index = m;
return 1;
}
return 0;
}
static size_t write_midx_header(struct hashfile *f,
unsigned char num_chunks,
uint32_t num_packs)
{
hashwrite_be32(f, MIDX_SIGNATURE);
hashwrite_u8(f, MIDX_VERSION);
hashwrite_u8(f, oid_version(the_hash_algo));
hashwrite_u8(f, num_chunks);
hashwrite_u8(f, 0); /* unused */
hashwrite_be32(f, num_packs);
return MIDX_HEADER_SIZE;
}
struct pack_info {
uint32_t orig_pack_int_id;
char *pack_name;
struct packed_git *p;
unsigned expired : 1;
};
static int pack_info_compare(const void *_a, const void *_b)
{
struct pack_info *a = (struct pack_info *)_a;
struct pack_info *b = (struct pack_info *)_b;
return strcmp(a->pack_name, b->pack_name);
}
static int idx_or_pack_name_cmp(const void *_va, const void *_vb)
{
const char *pack_name = _va;
const struct pack_info *compar = _vb;
return cmp_idx_or_pack_name(pack_name, compar->pack_name);
}
struct write_midx_context {
struct pack_info *info;
size_t nr;
size_t alloc;
struct multi_pack_index *m;
struct progress *progress;
unsigned pack_paths_checked;
struct pack_midx_entry *entries;
size_t entries_nr;
uint32_t *pack_perm;
uint32_t *pack_order;
unsigned large_offsets_needed:1;
uint32_t num_large_offsets;
int preferred_pack_idx;
struct string_list *to_include;
};
static void add_pack_to_midx(const char *full_path, size_t full_path_len,
const char *file_name, void *data)
{
struct write_midx_context *ctx = data;
if (ends_with(file_name, ".idx")) {
display_progress(ctx->progress, ++ctx->pack_paths_checked);
/*
* Note that at most one of ctx->m and ctx->to_include are set,
* so we are testing midx_contains_pack() and
* string_list_has_string() independently (guarded by the
* appropriate NULL checks).
*
* We could support passing to_include while reusing an existing
* MIDX, but don't currently since the reuse process drags
* forward all packs from an existing MIDX (without checking
* whether or not they appear in the to_include list).
*
* If we added support for that, these next two conditional
* should be performed independently (likely checking
* to_include before the existing MIDX).
*/
if (ctx->m && midx_contains_pack(ctx->m, file_name))
return;
else if (ctx->to_include &&
!string_list_has_string(ctx->to_include, file_name))
return;
ALLOC_GROW(ctx->info, ctx->nr + 1, ctx->alloc);
ctx->info[ctx->nr].p = add_packed_git(full_path,
full_path_len,
0);
if (!ctx->info[ctx->nr].p) {
warning(_("failed to add packfile '%s'"),
full_path);
return;
}
if (open_pack_index(ctx->info[ctx->nr].p)) {
warning(_("failed to open pack-index '%s'"),
full_path);
close_pack(ctx->info[ctx->nr].p);
FREE_AND_NULL(ctx->info[ctx->nr].p);
return;
}
ctx->info[ctx->nr].pack_name = xstrdup(file_name);
ctx->info[ctx->nr].orig_pack_int_id = ctx->nr;
ctx->info[ctx->nr].expired = 0;
ctx->nr++;
}
}
struct pack_midx_entry {
struct object_id oid;
uint32_t pack_int_id;
time_t pack_mtime;
uint64_t offset;
unsigned preferred : 1;
};
static int midx_oid_compare(const void *_a, const void *_b)
{
const struct pack_midx_entry *a = (const struct pack_midx_entry *)_a;
const struct pack_midx_entry *b = (const struct pack_midx_entry *)_b;
int cmp = oidcmp(&a->oid, &b->oid);
if (cmp)
return cmp;
/* Sort objects in a preferred pack first when multiple copies exist. */
if (a->preferred > b->preferred)
return -1;
if (a->preferred < b->preferred)
return 1;
if (a->pack_mtime > b->pack_mtime)
return -1;
else if (a->pack_mtime < b->pack_mtime)
return 1;
return a->pack_int_id - b->pack_int_id;
}
static int nth_midxed_pack_midx_entry(struct multi_pack_index *m,
struct pack_midx_entry *e,
uint32_t pos)
{
if (pos >= m->num_objects)
return 1;
nth_midxed_object_oid(&e->oid, m, pos);
e->pack_int_id = nth_midxed_pack_int_id(m, pos);
e->offset = nth_midxed_offset(m, pos);
/* consider objects in midx to be from "old" packs */
e->pack_mtime = 0;
return 0;
}
static void fill_pack_entry(uint32_t pack_int_id,
struct packed_git *p,
uint32_t cur_object,
struct pack_midx_entry *entry,
int preferred)
{
if (nth_packed_object_id(&entry->oid, p, cur_object) < 0)
die(_("failed to locate object %d in packfile"), cur_object);
entry->pack_int_id = pack_int_id;
entry->pack_mtime = p->mtime;
entry->offset = nth_packed_object_offset(p, cur_object);
entry->preferred = !!preferred;
}
struct midx_fanout {
struct pack_midx_entry *entries;
size_t nr, alloc;
};
static void midx_fanout_grow(struct midx_fanout *fanout, size_t nr)
{
if (nr < fanout->nr)
BUG("negative growth in midx_fanout_grow() (%"PRIuMAX" < %"PRIuMAX")",
(uintmax_t)nr, (uintmax_t)fanout->nr);
ALLOC_GROW(fanout->entries, nr, fanout->alloc);
}
static void midx_fanout_sort(struct midx_fanout *fanout)
{
QSORT(fanout->entries, fanout->nr, midx_oid_compare);
}
static void midx_fanout_add_midx_fanout(struct midx_fanout *fanout,
struct multi_pack_index *m,
uint32_t cur_fanout,
int preferred_pack)
{
uint32_t start = 0, end;
uint32_t cur_object;
if (cur_fanout)
start = ntohl(m->chunk_oid_fanout[cur_fanout - 1]);
end = ntohl(m->chunk_oid_fanout[cur_fanout]);
for (cur_object = start; cur_object < end; cur_object++) {
if ((preferred_pack > -1) &&
(preferred_pack == nth_midxed_pack_int_id(m, cur_object))) {
/*
* Objects from preferred packs are added
* separately.
*/
continue;
}
midx_fanout_grow(fanout, fanout->nr + 1);
nth_midxed_pack_midx_entry(m,
&fanout->entries[fanout->nr],
cur_object);
midx.c: include preferred pack correctly with existing MIDX This patch resolves an issue where the object order used to generate a MIDX bitmap would violate an invariant that all of the preferred pack's objects are represented by that pack in the MIDX. The problem arises when reusing an existing MIDX while generating a new one, and occurs specifically when the identity of the preferred pack changes from one MIDX to another, along with a few other conditions: - the new preferred pack must also be present in the existing MIDX - the new preferred pack must *not* have been the preferred pack in the existing MIDX - most importantly, there must be at least one object present in the physical preferred pack (ie., it shows up in that pack's index) but was selected from a *different* pack when the previous MIDX was generated When the above conditions are all met, we end up (incorrectly) discarding copies of some objects in the pack selected as the preferred pack. This is because `get_sorted_entries()` adds objects to its list by doing the following at each fanout level: - first, adding all objects from that fanout level from an existing MIDX - then, adding all objects from that fanout level in each pack *not* included in the existing MIDX So if some object was not selected from the to-be-preferred pack when writing the previous MIDX, then we will never consider it as a candidate when generating the new MIDX. This means that it's possible for the preferred pack to not include all of its objects in the MIDX's pseudo-pack object order, which is an invariant violation of that order. Resolve this by adding all objects from the preferred pack separately when it appears in the existing MIDX (if one was present). This will duplicate objects from that pack that *did* appear in the MIDX, but this is fine, since get_sorted_entries() already handles duplicates. (A future optimization in this area could avoid adding copies of objects that we know already existing in the MIDX.) Note that we no longer need to compute the preferred-ness of objects added from the MIDX, since we only want to select the preferred objects from a single source. (We could still mark these preferred bits, but doing so is redundant and unnecessary). This resolves the bug demonstrated by t5326.174 ("preferred pack change with existing MIDX bitmap"). Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-08-22 19:50:46 +00:00
fanout->entries[fanout->nr].preferred = 0;
fanout->nr++;
}
}
static void midx_fanout_add_pack_fanout(struct midx_fanout *fanout,
struct pack_info *info,
uint32_t cur_pack,
int preferred,
uint32_t cur_fanout)
{
struct packed_git *pack = info[cur_pack].p;
uint32_t start = 0, end;
uint32_t cur_object;
if (cur_fanout)
start = get_pack_fanout(pack, cur_fanout - 1);
end = get_pack_fanout(pack, cur_fanout);
for (cur_object = start; cur_object < end; cur_object++) {
midx_fanout_grow(fanout, fanout->nr + 1);
fill_pack_entry(cur_pack,
info[cur_pack].p,
cur_object,
&fanout->entries[fanout->nr],
preferred);
fanout->nr++;
}
}
/*
* It is possible to artificially get into a state where there are many
* duplicate copies of objects. That can create high memory pressure if
* we are to create a list of all objects before de-duplication. To reduce
* this memory pressure without a significant performance drop, automatically
* group objects by the first byte of their object id. Use the IDX fanout
* tables to group the data, copy to a local array, then sort.
*
* Copy only the de-duplicated entries (selected by most-recent modified time
* of a packfile containing the object).
*/
static struct pack_midx_entry *get_sorted_entries(struct multi_pack_index *m,
struct pack_info *info,
uint32_t nr_packs,
size_t *nr_objects,
int preferred_pack)
{
uint32_t cur_fanout, cur_pack, cur_object;
size_t alloc_objects, total_objects = 0;
struct midx_fanout fanout = { 0 };
struct pack_midx_entry *deduplicated_entries = NULL;
uint32_t start_pack = m ? m->num_packs : 0;
for (cur_pack = start_pack; cur_pack < nr_packs; cur_pack++)
total_objects = st_add(total_objects,
info[cur_pack].p->num_objects);
/*
* As we de-duplicate by fanout value, we expect the fanout
* slices to be evenly distributed, with some noise. Hence,
* allocate slightly more than one 256th.
*/
alloc_objects = fanout.alloc = total_objects > 3200 ? total_objects / 200 : 16;
ALLOC_ARRAY(fanout.entries, fanout.alloc);
ALLOC_ARRAY(deduplicated_entries, alloc_objects);
*nr_objects = 0;
for (cur_fanout = 0; cur_fanout < 256; cur_fanout++) {
fanout.nr = 0;
if (m)
midx_fanout_add_midx_fanout(&fanout, m, cur_fanout,
preferred_pack);
for (cur_pack = start_pack; cur_pack < nr_packs; cur_pack++) {
int preferred = cur_pack == preferred_pack;
midx_fanout_add_pack_fanout(&fanout,
info, cur_pack,
preferred, cur_fanout);
}
midx.c: include preferred pack correctly with existing MIDX This patch resolves an issue where the object order used to generate a MIDX bitmap would violate an invariant that all of the preferred pack's objects are represented by that pack in the MIDX. The problem arises when reusing an existing MIDX while generating a new one, and occurs specifically when the identity of the preferred pack changes from one MIDX to another, along with a few other conditions: - the new preferred pack must also be present in the existing MIDX - the new preferred pack must *not* have been the preferred pack in the existing MIDX - most importantly, there must be at least one object present in the physical preferred pack (ie., it shows up in that pack's index) but was selected from a *different* pack when the previous MIDX was generated When the above conditions are all met, we end up (incorrectly) discarding copies of some objects in the pack selected as the preferred pack. This is because `get_sorted_entries()` adds objects to its list by doing the following at each fanout level: - first, adding all objects from that fanout level from an existing MIDX - then, adding all objects from that fanout level in each pack *not* included in the existing MIDX So if some object was not selected from the to-be-preferred pack when writing the previous MIDX, then we will never consider it as a candidate when generating the new MIDX. This means that it's possible for the preferred pack to not include all of its objects in the MIDX's pseudo-pack object order, which is an invariant violation of that order. Resolve this by adding all objects from the preferred pack separately when it appears in the existing MIDX (if one was present). This will duplicate objects from that pack that *did* appear in the MIDX, but this is fine, since get_sorted_entries() already handles duplicates. (A future optimization in this area could avoid adding copies of objects that we know already existing in the MIDX.) Note that we no longer need to compute the preferred-ness of objects added from the MIDX, since we only want to select the preferred objects from a single source. (We could still mark these preferred bits, but doing so is redundant and unnecessary). This resolves the bug demonstrated by t5326.174 ("preferred pack change with existing MIDX bitmap"). Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-08-22 19:50:46 +00:00
if (-1 < preferred_pack && preferred_pack < start_pack)
midx_fanout_add_pack_fanout(&fanout, info,
preferred_pack, 1,
cur_fanout);
midx_fanout_sort(&fanout);
/*
* The batch is now sorted by OID and then mtime (descending).
* Take only the first duplicate.
*/
for (cur_object = 0; cur_object < fanout.nr; cur_object++) {
if (cur_object && oideq(&fanout.entries[cur_object - 1].oid,
&fanout.entries[cur_object].oid))
continue;
ALLOC_GROW(deduplicated_entries, st_add(*nr_objects, 1),
alloc_objects);
memcpy(&deduplicated_entries[*nr_objects],
&fanout.entries[cur_object],
sizeof(struct pack_midx_entry));
(*nr_objects)++;
}
}
free(fanout.entries);
return deduplicated_entries;
}
static int write_midx_pack_names(struct hashfile *f, void *data)
{
struct write_midx_context *ctx = data;
uint32_t i;
unsigned char padding[MIDX_CHUNK_ALIGNMENT];
size_t written = 0;
for (i = 0; i < ctx->nr; i++) {
size_t writelen;
if (ctx->info[i].expired)
continue;
if (i && strcmp(ctx->info[i].pack_name, ctx->info[i - 1].pack_name) <= 0)
BUG("incorrect pack-file order: %s before %s",
ctx->info[i - 1].pack_name,
ctx->info[i].pack_name);
writelen = strlen(ctx->info[i].pack_name) + 1;
hashwrite(f, ctx->info[i].pack_name, writelen);
written += writelen;
}
/* add padding to be aligned */
i = MIDX_CHUNK_ALIGNMENT - (written % MIDX_CHUNK_ALIGNMENT);
if (i < MIDX_CHUNK_ALIGNMENT) {
memset(padding, 0, sizeof(padding));
hashwrite(f, padding, i);
}
return 0;
}
static int write_midx_oid_fanout(struct hashfile *f,
void *data)
{
struct write_midx_context *ctx = data;
struct pack_midx_entry *list = ctx->entries;
struct pack_midx_entry *last = ctx->entries + ctx->entries_nr;
uint32_t count = 0;
uint32_t i;
/*
* Write the first-level table (the list is sorted,
* but we use a 256-entry lookup to be able to avoid
* having to do eight extra binary search iterations).
*/
for (i = 0; i < 256; i++) {
struct pack_midx_entry *next = list;
while (next < last && next->oid.hash[0] == i) {
count++;
next++;
}
hashwrite_be32(f, count);
list = next;
}
return 0;
}
static int write_midx_oid_lookup(struct hashfile *f,
void *data)
{
struct write_midx_context *ctx = data;
unsigned char hash_len = the_hash_algo->rawsz;
struct pack_midx_entry *list = ctx->entries;
uint32_t i;
for (i = 0; i < ctx->entries_nr; i++) {
struct pack_midx_entry *obj = list++;
if (i < ctx->entries_nr - 1) {
struct pack_midx_entry *next = list;
if (oidcmp(&obj->oid, &next->oid) >= 0)
BUG("OIDs not in order: %s >= %s",
oid_to_hex(&obj->oid),
oid_to_hex(&next->oid));
}
hashwrite(f, obj->oid.hash, (int)hash_len);
}
return 0;
}
static int write_midx_object_offsets(struct hashfile *f,
void *data)
{
struct write_midx_context *ctx = data;
struct pack_midx_entry *list = ctx->entries;
uint32_t i, nr_large_offset = 0;
for (i = 0; i < ctx->entries_nr; i++) {
struct pack_midx_entry *obj = list++;
if (ctx->pack_perm[obj->pack_int_id] == PACK_EXPIRED)
BUG("object %s is in an expired pack with int-id %d",
oid_to_hex(&obj->oid),
obj->pack_int_id);
hashwrite_be32(f, ctx->pack_perm[obj->pack_int_id]);
if (ctx->large_offsets_needed && obj->offset >> 31)
hashwrite_be32(f, MIDX_LARGE_OFFSET_NEEDED | nr_large_offset++);
else if (!ctx->large_offsets_needed && obj->offset >> 32)
BUG("object %s requires a large offset (%"PRIx64") but the MIDX is not writing large offsets!",
oid_to_hex(&obj->oid),
obj->offset);
else
hashwrite_be32(f, (uint32_t)obj->offset);
}
return 0;
}
static int write_midx_large_offsets(struct hashfile *f,
void *data)
{
struct write_midx_context *ctx = data;
struct pack_midx_entry *list = ctx->entries;
struct pack_midx_entry *end = ctx->entries + ctx->entries_nr;
uint32_t nr_large_offset = ctx->num_large_offsets;
while (nr_large_offset) {
struct pack_midx_entry *obj;
uint64_t offset;
if (list >= end)
BUG("too many large-offset objects");
obj = list++;
offset = obj->offset;
if (!(offset >> 31))
continue;
hashwrite_be64(f, offset);
nr_large_offset--;
}
return 0;
}
midx.c: make changing the preferred pack safe The previous patch demonstrates a bug where a MIDX's auxiliary object order can become out of sync with a MIDX bitmap. This is because of two confounding factors: - First, the object order is stored in a file which is named according to the multi-pack index's checksum, and the MIDX does not store the object order. This means that the object order can change without altering the checksum. - But the .rev file is moved into place with finalize_object_file(), which link(2)'s the file into place instead of renaming it. For us, that means that a modified .rev file will not be moved into place if MIDX's checksum was unchanged. This fix is to force the MIDX's checksum to change when the preferred pack changes but the set of packs contained in the MIDX does not. In other words, when the object order changes, the MIDX's checksum needs to change with it (regardless of whether the MIDX is tracking the same or different packs). This prevents a race whereby changing the object order (but not the packs themselves) enables a reader to see the new .rev file with the old MIDX, or similarly seeing the new bitmap with the old object order. But why can't we just stop hardlinking the .rev into place instead adding additional data to the MIDX? Suppose that's what we did. Then when we go to generate the new bitmap, we'll load the old MIDX bitmap, along with the MIDX that it references. That's fine, since the new MIDX isn't moved into place until after the new bitmap is generated. But the new object order *has* been moved into place. So we'll read the old bitmaps in the new order when generating the new bitmap file, meaning that without this secondary change, bitmap generation itself would become a victim of the race described here. This can all be prevented by forcing the MIDX's checksum to change when the object order does. By embedding the entire object order into the MIDX, we do just that. That is, the MIDX's checksum will change in response to any perturbation of the underlying object order. In t5326, this will cause the MIDX's checksum to update (even without changing the set of packs in the MIDX), preventing the stale read problem. Note that this makes it safe to continue to link(2) the MIDX .rev file into place, since it is now impossible to have a .rev file that is out-of-sync with the MIDX whose checksum it references. (But we will do away with MIDX .rev files later in this series anyway, so this is somewhat of a moot point). In theory, it is possible to store a "fingerprint" of the full object order here, so long as that fingerprint changes at least as often as the full object order does. Some possibilities here include storing the identity of the preferred pack, along with the mtimes of the non-preferred packs in a consistent order. But storing a limited part of the information makes it difficult to reason about whether or not there are gaps between the two that would cause us to get bitten by this bug again. Signed-off-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:03 +00:00
static int write_midx_revindex(struct hashfile *f,
void *data)
{
struct write_midx_context *ctx = data;
uint32_t i;
for (i = 0; i < ctx->entries_nr; i++)
hashwrite_be32(f, ctx->pack_order[i]);
return 0;
}
struct midx_pack_order_data {
uint32_t nr;
uint32_t pack;
off_t offset;
};
static int midx_pack_order_cmp(const void *va, const void *vb)
{
const struct midx_pack_order_data *a = va, *b = vb;
if (a->pack < b->pack)
return -1;
else if (a->pack > b->pack)
return 1;
else if (a->offset < b->offset)
return -1;
else if (a->offset > b->offset)
return 1;
else
return 0;
}
static uint32_t *midx_pack_order(struct write_midx_context *ctx)
{
struct midx_pack_order_data *data;
uint32_t *pack_order;
uint32_t i;
trace2_region_enter("midx", "midx_pack_order", the_repository);
ALLOC_ARRAY(data, ctx->entries_nr);
for (i = 0; i < ctx->entries_nr; i++) {
struct pack_midx_entry *e = &ctx->entries[i];
data[i].nr = i;
data[i].pack = ctx->pack_perm[e->pack_int_id];
if (!e->preferred)
data[i].pack |= (1U << 31);
data[i].offset = e->offset;
}
QSORT(data, ctx->entries_nr, midx_pack_order_cmp);
ALLOC_ARRAY(pack_order, ctx->entries_nr);
for (i = 0; i < ctx->entries_nr; i++)
pack_order[i] = data[i].nr;
free(data);
trace2_region_leave("midx", "midx_pack_order", the_repository);
return pack_order;
}
static void write_midx_reverse_index(char *midx_name, unsigned char *midx_hash,
struct write_midx_context *ctx)
{
struct strbuf buf = STRBUF_INIT;
const char *tmp_file;
trace2_region_enter("midx", "write_midx_reverse_index", the_repository);
strbuf_addf(&buf, "%s-%s.rev", midx_name, hash_to_hex(midx_hash));
tmp_file = write_rev_file_order(NULL, ctx->pack_order, ctx->entries_nr,
midx_hash, WRITE_REV);
if (finalize_object_file(tmp_file, buf.buf))
die(_("cannot store reverse index file"));
strbuf_release(&buf);
trace2_region_leave("midx", "write_midx_reverse_index", the_repository);
}
static void clear_midx_files_ext(const char *object_dir, const char *ext,
unsigned char *keep_hash);
midx: don't reuse corrupt MIDXs when writing When writing a new multi-pack index, Git tries to reuse as much of the data from an existing MIDX as possible, like object offsets. This is done to avoid re-opening a bunch of *.idx files unnecessarily, but can lead to problems if the data we are reusing is corrupt. That's because we'll blindly reuse data from an existing MIDX without checking its trailing checksum for validity. So if there is memory corruption while writing a MIDX, or disk corruption in the intervening period between writing and reuse, we'll blindly propagate those bad values forward. Suppose we experience a memory corruption while writing a MIDX such that we write an incorrect object offset (or alternatively, the disk corrupts the data after being written, but before being reused). Then when we go to write a new MIDX, we'll reuse the bad object offset without checking its validity. This means that the MIDX we just wrote is broken, but its trailing checksum is in-tact, since we never bothered to look at the values before writing. In the above, a "git multi-pack-index verify" would have caught the problem before writing, but writing a new MIDX wouldn't have noticed anything wrong, blindly carrying forward the corrupt offset. Individual pack indexes check their validity by verifying the crc32 attached to each entry when carrying data forward during a repack. We could solve this problem for MIDXs in the same way, but individual crc32's don't make much sense, since their entries are so small. Likewise, checking the whole file on every read may be prohibitively expensive if a repository has a lot of objects, packs, or both. But we can check the trailing checksum when reusing an existing MIDX when writing a new one. And a corrupt MIDX need not stop us from writing a new one, since we can just avoid reusing the existing one at all and pretend as if we are writing a new MIDX from scratch. Suggested-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-06-23 18:39:12 +00:00
static int midx_checksum_valid(struct multi_pack_index *m)
{
return hashfile_checksum_valid(m->data, m->data_len);
}
static void prepare_midx_packing_data(struct packing_data *pdata,
struct write_midx_context *ctx)
{
uint32_t i;
trace2_region_enter("midx", "prepare_midx_packing_data", the_repository);
memset(pdata, 0, sizeof(struct packing_data));
prepare_packing_data(the_repository, pdata);
for (i = 0; i < ctx->entries_nr; i++) {
struct pack_midx_entry *from = &ctx->entries[ctx->pack_order[i]];
struct object_entry *to = packlist_alloc(pdata, &from->oid);
oe_set_in_pack(pdata, to,
ctx->info[ctx->pack_perm[from->pack_int_id]].p);
}
trace2_region_leave("midx", "prepare_midx_packing_data", the_repository);
}
static int add_ref_to_pending(const char *refname,
const struct object_id *oid,
int flag, void *cb_data)
{
struct rev_info *revs = (struct rev_info*)cb_data;
struct object_id peeled;
struct object *object;
if ((flag & REF_ISSYMREF) && (flag & REF_ISBROKEN)) {
warning("symbolic ref is dangling: %s", refname);
return 0;
}
if (!peel_iterated_oid(oid, &peeled))
oid = &peeled;
object = parse_object_or_die(oid, refname);
if (object->type != OBJ_COMMIT)
return 0;
add_pending_object(revs, object, "");
if (bitmap_is_preferred_refname(revs->repo, refname))
object->flags |= NEEDS_BITMAP;
return 0;
}
struct bitmap_commit_cb {
struct commit **commits;
size_t commits_nr, commits_alloc;
struct write_midx_context *ctx;
};
static const struct object_id *bitmap_oid_access(size_t index,
const void *_entries)
{
const struct pack_midx_entry *entries = _entries;
return &entries[index].oid;
}
static void bitmap_show_commit(struct commit *commit, void *_data)
{
struct bitmap_commit_cb *data = _data;
int pos = oid_pos(&commit->object.oid, data->ctx->entries,
data->ctx->entries_nr,
bitmap_oid_access);
if (pos < 0)
return;
ALLOC_GROW(data->commits, data->commits_nr + 1, data->commits_alloc);
data->commits[data->commits_nr++] = commit;
}
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
static int read_refs_snapshot(const char *refs_snapshot,
struct rev_info *revs)
{
struct strbuf buf = STRBUF_INIT;
struct object_id oid;
FILE *f = xfopen(refs_snapshot, "r");
while (strbuf_getline(&buf, f) != EOF) {
struct object *object;
int preferred = 0;
char *hex = buf.buf;
const char *end = NULL;
if (buf.len && *buf.buf == '+') {
preferred = 1;
hex = &buf.buf[1];
}
if (parse_oid_hex(hex, &oid, &end) < 0)
die(_("could not parse line: %s"), buf.buf);
if (*end)
die(_("malformed line: %s"), buf.buf);
object = parse_object_or_die(&oid, NULL);
if (preferred)
object->flags |= NEEDS_BITMAP;
add_pending_object(revs, object, "");
}
fclose(f);
strbuf_release(&buf);
return 0;
}
static struct commit **find_commits_for_midx_bitmap(uint32_t *indexed_commits_nr_p,
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
const char *refs_snapshot,
struct write_midx_context *ctx)
{
struct rev_info revs;
struct bitmap_commit_cb cb = {0};
trace2_region_enter("midx", "find_commits_for_midx_bitmap",
the_repository);
cb.ctx = ctx;
repo_init_revisions(the_repository, &revs, NULL);
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
if (refs_snapshot) {
read_refs_snapshot(refs_snapshot, &revs);
} else {
setup_revisions(0, NULL, &revs, NULL);
for_each_ref(add_ref_to_pending, &revs);
}
/*
* Skipping promisor objects here is intentional, since it only excludes
* them from the list of reachable commits that we want to select from
* when computing the selection of MIDX'd commits to receive bitmaps.
*
* Reachability bitmaps do require that their objects be closed under
* reachability, but fetching any objects missing from promisors at this
* point is too late. But, if one of those objects can be reached from
* an another object that is included in the bitmap, then we will
* complain later that we don't have reachability closure (and fail
* appropriately).
*/
fetch_if_missing = 0;
revs.exclude_promisor_objects = 1;
if (prepare_revision_walk(&revs))
die(_("revision walk setup failed"));
traverse_commit_list(&revs, bitmap_show_commit, NULL, &cb);
if (indexed_commits_nr_p)
*indexed_commits_nr_p = cb.commits_nr;
release_revisions(&revs);
trace2_region_leave("midx", "find_commits_for_midx_bitmap",
the_repository);
return cb.commits;
}
static int write_midx_bitmap(const char *midx_name,
const unsigned char *midx_hash,
struct packing_data *pdata,
struct commit **commits,
uint32_t commits_nr,
uint32_t *pack_order,
unsigned flags)
{
int ret, i;
uint16_t options = 0;
struct pack_idx_entry **index;
char *bitmap_name = xstrfmt("%s-%s.bitmap", midx_name,
hash_to_hex(midx_hash));
midx: prevent writing a .bitmap without any objects When trying to write a MIDX, we already prevent the case where there weren't any packs present, and thus we would have written an empty MIDX. But there is another "empty" case, which is more interesting, and we don't yet handle. If we try to write a MIDX which has at least one pack, but those packs together don't contain any objects, we will encounter a BUG() when trying to use the bitmap corresponding to that MIDX, like so: $ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0 (note that in the above reproduction, both `--use-bitmap-index` and `--stdout` are important, since without the former we won't even both to load the .bitmap, and without the latter we wont attempt pack reuse). The problem occurs when we try to discover the identity of the preferred pack to determine which range if any of existing packs we can reuse verbatim. This path is: `reuse_packfile_objects()` -> `reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`. #4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394 #5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431 #6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>, entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452 #7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658 #8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765 #9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154 Since neither the .bitmap or MIDX stores the identity of the preferred pack, we infer it by trying to load the first object in pseudo-pack order, and then asking the MIDX which pack was chosen to represent that object. But this fails our bounds check, since there are zero objects in the MIDX to begin with, which results in the BUG(). We could catch this more carefully in `midx_preferred_pack()`, but signaling the absence of a preferred pack out to all of its callers is somewhat awkward. Instead, let's avoid writing a MIDX .bitmap without any objects altogether. We catch this case in `write_midx_internal()`, and emit a warning if the caller indicated they wanted to write a bitmap before clearing out the relevant flags. If we somehow got to write_midx_bitmap(), then we will call BUG(), but this should now be an unreachable path. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-09 19:26:47 +00:00
trace2_region_enter("midx", "write_midx_bitmap", the_repository);
if (flags & MIDX_WRITE_BITMAP_HASH_CACHE)
options |= BITMAP_OPT_HASH_CACHE;
if (flags & MIDX_WRITE_BITMAP_LOOKUP_TABLE)
options |= BITMAP_OPT_LOOKUP_TABLE;
/*
* Build the MIDX-order index based on pdata.objects (which is already
* in MIDX order; c.f., 'midx_pack_order_cmp()' for the definition of
* this order).
*/
ALLOC_ARRAY(index, pdata->nr_objects);
for (i = 0; i < pdata->nr_objects; i++)
index[i] = &pdata->objects[i].idx;
bitmap_writer_show_progress(flags & MIDX_PROGRESS);
bitmap_writer_build_type_index(pdata, index, pdata->nr_objects);
/*
* bitmap_writer_finish expects objects in lex order, but pack_order
* gives us exactly that. use it directly instead of re-sorting the
* array.
*
* This changes the order of objects in 'index' between
* bitmap_writer_build_type_index and bitmap_writer_finish.
*
* The same re-ordering takes place in the single-pack bitmap code via
* write_idx_file(), which is called by finish_tmp_packfile(), which
* happens between bitmap_writer_build_type_index() and
* bitmap_writer_finish().
*/
for (i = 0; i < pdata->nr_objects; i++)
index[pack_order[i]] = &pdata->objects[i].idx;
bitmap_writer_select_commits(commits, commits_nr, -1);
ret = bitmap_writer_build(pdata);
if (ret < 0)
goto cleanup;
bitmap_writer_set_checksum(midx_hash);
bitmap_writer_finish(index, pdata->nr_objects, bitmap_name, options);
cleanup:
free(index);
free(bitmap_name);
trace2_region_leave("midx", "write_midx_bitmap", the_repository);
return ret;
}
static struct multi_pack_index *lookup_multi_pack_index(struct repository *r,
const char *object_dir)
{
struct multi_pack_index *result = NULL;
struct multi_pack_index *cur;
char *obj_dir_real = real_pathdup(object_dir, 1);
struct strbuf cur_path_real = STRBUF_INIT;
/* Ensure the given object_dir is local, or a known alternate. */
find_odb(r, obj_dir_real);
for (cur = get_multi_pack_index(r); cur; cur = cur->next) {
strbuf_realpath(&cur_path_real, cur->object_dir, 1);
if (!strcmp(obj_dir_real, cur_path_real.buf)) {
result = cur;
goto cleanup;
}
}
cleanup:
free(obj_dir_real);
strbuf_release(&cur_path_real);
return result;
}
midx: avoid opening multiple MIDXs when writing Opening multiple instance of the same MIDX can lead to problems like two separate packed_git structures which represent the same pack being added to the repository's object store. The above scenario can happen because prepare_midx_pack() checks if `m->packs[pack_int_id]` is NULL in order to determine if a pack has been opened and installed in the repository before. But a caller can construct two copies of the same MIDX by calling get_multi_pack_index() and load_multi_pack_index() since the former manipulates the object store directly but the latter is a lower-level routine which allocates a new MIDX for each call. So if prepare_midx_pack() is called on multiple MIDXs with the same pack_int_id, then that pack will be installed twice in the object store's packed_git pointer. This can lead to problems in, for e.g., the pack-bitmap code, which does something like the following (in pack-bitmap.c:open_pack_bitmap()): struct bitmap_index *bitmap_git = ...; for (p = get_all_packs(r); p; p = p->next) { if (open_pack_bitmap_1(bitmap_git, p) == 0) ret = 0; } which is a problem if two copies of the same pack exist in the packed_git list because pack-bitmap.c:open_pack_bitmap_1() contains a conditional like the following: if (bitmap_git->pack || bitmap_git->midx) { /* ignore extra bitmap file; we can only handle one */ warning("ignoring extra bitmap file: %s", packfile->pack_name); close(fd); return -1; } Avoid this scenario by not letting write_midx_internal() open a MIDX that isn't also pointed at by the object store. So long as this is the case, other routines should prefer to open MIDXs with get_multi_pack_index() or reprepare_packed_git() instead of creating instances on their own. Because get_multi_pack_index() returns `r->object_store->multi_pack_index` if it is non-NULL, we'll only have one instance of a MIDX open at one time, avoiding these problems. To encourage this, drop the `struct multi_pack_index *` parameter from `write_midx_internal()`, and rely instead on the `object_dir` to find (or initialize) the correct MIDX instance. Likewise, replace the call to `close_midx()` with `close_object_store()`, since we're about to replace the MIDX with a new one and should invalidate the object store's memory of any MIDX that might have existed beforehand. Note that this now forbids passing object directories that don't belong to alternate repositories over `--object-dir`, since before we would have happily opened a MIDX in any directory, but now restrict ourselves to only those reachable by `r->objects->multi_pack_index` (and alternate MIDXs that we can see by walking the `next` pointer). As far as I can tell, supporting arbitrary directories with `--object-dir` was a historical accident, since even the documentation says `<alt>` when referring to the value passed to this option. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 20:34:01 +00:00
static int write_midx_internal(const char *object_dir,
struct string_list *packs_to_include,
struct string_list *packs_to_drop,
const char *preferred_pack_name,
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
const char *refs_snapshot,
unsigned flags)
{
struct strbuf midx_name = STRBUF_INIT;
unsigned char midx_hash[GIT_MAX_RAWSZ];
uint32_t i;
struct hashfile *f = NULL;
struct lock_file lk;
struct write_midx_context ctx = { 0 };
int pack_name_concat_len = 0;
int dropped_packs = 0;
int result = 0;
struct chunkfile *cf;
trace2_region_enter("midx", "write_midx_internal", the_repository);
get_midx_filename(&midx_name, object_dir);
if (safe_create_leading_directories(midx_name.buf))
die_errno(_("unable to create leading directories of %s"),
midx_name.buf);
if (!packs_to_include) {
/*
* Only reference an existing MIDX when not filtering which
* packs to include, since all packs and objects are copied
* blindly from an existing MIDX if one is present.
*/
ctx.m = lookup_multi_pack_index(the_repository, object_dir);
midx: avoid opening multiple MIDXs when writing Opening multiple instance of the same MIDX can lead to problems like two separate packed_git structures which represent the same pack being added to the repository's object store. The above scenario can happen because prepare_midx_pack() checks if `m->packs[pack_int_id]` is NULL in order to determine if a pack has been opened and installed in the repository before. But a caller can construct two copies of the same MIDX by calling get_multi_pack_index() and load_multi_pack_index() since the former manipulates the object store directly but the latter is a lower-level routine which allocates a new MIDX for each call. So if prepare_midx_pack() is called on multiple MIDXs with the same pack_int_id, then that pack will be installed twice in the object store's packed_git pointer. This can lead to problems in, for e.g., the pack-bitmap code, which does something like the following (in pack-bitmap.c:open_pack_bitmap()): struct bitmap_index *bitmap_git = ...; for (p = get_all_packs(r); p; p = p->next) { if (open_pack_bitmap_1(bitmap_git, p) == 0) ret = 0; } which is a problem if two copies of the same pack exist in the packed_git list because pack-bitmap.c:open_pack_bitmap_1() contains a conditional like the following: if (bitmap_git->pack || bitmap_git->midx) { /* ignore extra bitmap file; we can only handle one */ warning("ignoring extra bitmap file: %s", packfile->pack_name); close(fd); return -1; } Avoid this scenario by not letting write_midx_internal() open a MIDX that isn't also pointed at by the object store. So long as this is the case, other routines should prefer to open MIDXs with get_multi_pack_index() or reprepare_packed_git() instead of creating instances on their own. Because get_multi_pack_index() returns `r->object_store->multi_pack_index` if it is non-NULL, we'll only have one instance of a MIDX open at one time, avoiding these problems. To encourage this, drop the `struct multi_pack_index *` parameter from `write_midx_internal()`, and rely instead on the `object_dir` to find (or initialize) the correct MIDX instance. Likewise, replace the call to `close_midx()` with `close_object_store()`, since we're about to replace the MIDX with a new one and should invalidate the object store's memory of any MIDX that might have existed beforehand. Note that this now forbids passing object directories that don't belong to alternate repositories over `--object-dir`, since before we would have happily opened a MIDX in any directory, but now restrict ourselves to only those reachable by `r->objects->multi_pack_index` (and alternate MIDXs that we can see by walking the `next` pointer). As far as I can tell, supporting arbitrary directories with `--object-dir` was a historical accident, since even the documentation says `<alt>` when referring to the value passed to this option. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-01 20:34:01 +00:00
}
midx: don't reuse corrupt MIDXs when writing When writing a new multi-pack index, Git tries to reuse as much of the data from an existing MIDX as possible, like object offsets. This is done to avoid re-opening a bunch of *.idx files unnecessarily, but can lead to problems if the data we are reusing is corrupt. That's because we'll blindly reuse data from an existing MIDX without checking its trailing checksum for validity. So if there is memory corruption while writing a MIDX, or disk corruption in the intervening period between writing and reuse, we'll blindly propagate those bad values forward. Suppose we experience a memory corruption while writing a MIDX such that we write an incorrect object offset (or alternatively, the disk corrupts the data after being written, but before being reused). Then when we go to write a new MIDX, we'll reuse the bad object offset without checking its validity. This means that the MIDX we just wrote is broken, but its trailing checksum is in-tact, since we never bothered to look at the values before writing. In the above, a "git multi-pack-index verify" would have caught the problem before writing, but writing a new MIDX wouldn't have noticed anything wrong, blindly carrying forward the corrupt offset. Individual pack indexes check their validity by verifying the crc32 attached to each entry when carrying data forward during a repack. We could solve this problem for MIDXs in the same way, but individual crc32's don't make much sense, since their entries are so small. Likewise, checking the whole file on every read may be prohibitively expensive if a repository has a lot of objects, packs, or both. But we can check the trailing checksum when reusing an existing MIDX when writing a new one. And a corrupt MIDX need not stop us from writing a new one, since we can just avoid reusing the existing one at all and pretend as if we are writing a new MIDX from scratch. Suggested-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-06-23 18:39:12 +00:00
if (ctx.m && !midx_checksum_valid(ctx.m)) {
warning(_("ignoring existing multi-pack-index; checksum mismatch"));
ctx.m = NULL;
}
ctx.nr = 0;
ctx.alloc = ctx.m ? ctx.m->num_packs : 16;
ctx.info = NULL;
ALLOC_ARRAY(ctx.info, ctx.alloc);
if (ctx.m) {
for (i = 0; i < ctx.m->num_packs; i++) {
ALLOC_GROW(ctx.info, ctx.nr + 1, ctx.alloc);
ctx.info[ctx.nr].orig_pack_int_id = i;
ctx.info[ctx.nr].pack_name = xstrdup(ctx.m->pack_names[i]);
ctx.info[ctx.nr].p = ctx.m->packs[i];
ctx.info[ctx.nr].expired = 0;
if (flags & MIDX_WRITE_REV_INDEX) {
/*
* If generating a reverse index, need to have
* packed_git's loaded to compare their
* mtimes and object count.
*/
if (prepare_midx_pack(the_repository, ctx.m, i)) {
error(_("could not load pack"));
result = 1;
goto cleanup;
}
if (open_pack_index(ctx.m->packs[i]))
die(_("could not open index for %s"),
ctx.m->packs[i]->pack_name);
ctx.info[ctx.nr].p = ctx.m->packs[i];
}
ctx.nr++;
}
}
ctx.pack_paths_checked = 0;
if (flags & MIDX_PROGRESS)
ctx.progress = start_delayed_progress(_("Adding packfiles to multi-pack-index"), 0);
else
ctx.progress = NULL;
ctx.to_include = packs_to_include;
for_each_file_in_pack_dir(object_dir, add_pack_to_midx, &ctx);
stop_progress(&ctx.progress);
if ((ctx.m && ctx.nr == ctx.m->num_packs) &&
!(packs_to_include || packs_to_drop)) {
struct bitmap_index *bitmap_git;
int bitmap_exists;
int want_bitmap = flags & MIDX_WRITE_BITMAP;
bitmap_git = prepare_midx_bitmap_git(ctx.m);
bitmap_exists = bitmap_git && bitmap_is_midx(bitmap_git);
free_bitmap_index(bitmap_git);
if (bitmap_exists || !want_bitmap) {
/*
* The correct MIDX already exists, and so does a
* corresponding bitmap (or one wasn't requested).
*/
if (!want_bitmap)
clear_midx_files_ext(object_dir, ".bitmap",
NULL);
goto cleanup;
}
}
if (preferred_pack_name) {
ctx.preferred_pack_idx = -1;
for (i = 0; i < ctx.nr; i++) {
if (!cmp_idx_or_pack_name(preferred_pack_name,
ctx.info[i].pack_name)) {
ctx.preferred_pack_idx = i;
break;
}
}
midx: infer preferred pack when not given one In 9218c6a40c (midx: allow marking a pack as preferred, 2021-03-30), the multi-pack index code learned how to select a pack which all duplicate objects are selected from. That is, if an object appears in multiple packs, select the copy in the preferred pack before breaking ties according to the other rules like pack mtime and readdir() order. Not specifying a preferred pack can cause serious problems with multi-pack reachability bitmaps, because these bitmaps rely on having at least one pack from which all duplicates are selected. Not having such a pack causes problems with the code in pack-objects to reuse packs verbatim (e.g., that code assumes that a delta object in a chunk of pack sent verbatim will have its base object sent from the same pack). So why does not marking a pack preferred cause problems here? The reason is roughly as follows: - Ties are broken (when handling duplicate objects) by sorting according to midx_oid_compare(), which sorts objects by OID, preferred-ness, pack mtime, and finally pack ID (more on that later). - The psuedo pack-order (described in Documentation/technical/pack-format.txt under the section "multi-pack-index reverse indexes") is computed by midx_pack_order(), and sorts by pack ID and pack offset, with preferred packs sorting first. - But! Pack IDs come from incrementing the pack count in add_pack_to_midx(), which is a callback to for_each_file_in_pack_dir(), meaning that pack IDs are assigned in readdir() order. When specifying a preferred pack, all of that works fine, because duplicate objects are correctly resolved in favor of the copy in the preferred pack, and the preferred pack sorts first in the object order. "Sorting first" is critical, because the bitmap code relies on finding out which pack holds the first object in the MIDX's pseudo pack-order to determine which pack is preferred. But if we didn't specify a preferred pack, and the pack which comes first in readdir() order does not also have the lowest timestamp, then it's possible that that pack (the one that sorts first in pseudo-pack order, which the bitmap code will treat as the preferred one) did *not* have all duplicate objects resolved in its favor, resulting in breakage. The fix is simple: pick a (semi-arbitrary, non-empty) preferred pack when none was specified. This forces that pack to have duplicates resolved in its favor, and (critically) to sort first in pseudo-pack order. Unfortunately, testing this behavior portably isn't possible, since it depends on readdir() order which isn't guaranteed by POSIX. (Note that multi-pack reachability bitmaps have yet to be implemented; so in that sense this patch is fixing a bug which does not yet exist. But by having this patch beforehand, we can prevent the bug from ever materializing.) Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-08-31 20:52:04 +00:00
if (ctx.preferred_pack_idx == -1)
midx: infer preferred pack when not given one In 9218c6a40c (midx: allow marking a pack as preferred, 2021-03-30), the multi-pack index code learned how to select a pack which all duplicate objects are selected from. That is, if an object appears in multiple packs, select the copy in the preferred pack before breaking ties according to the other rules like pack mtime and readdir() order. Not specifying a preferred pack can cause serious problems with multi-pack reachability bitmaps, because these bitmaps rely on having at least one pack from which all duplicates are selected. Not having such a pack causes problems with the code in pack-objects to reuse packs verbatim (e.g., that code assumes that a delta object in a chunk of pack sent verbatim will have its base object sent from the same pack). So why does not marking a pack preferred cause problems here? The reason is roughly as follows: - Ties are broken (when handling duplicate objects) by sorting according to midx_oid_compare(), which sorts objects by OID, preferred-ness, pack mtime, and finally pack ID (more on that later). - The psuedo pack-order (described in Documentation/technical/pack-format.txt under the section "multi-pack-index reverse indexes") is computed by midx_pack_order(), and sorts by pack ID and pack offset, with preferred packs sorting first. - But! Pack IDs come from incrementing the pack count in add_pack_to_midx(), which is a callback to for_each_file_in_pack_dir(), meaning that pack IDs are assigned in readdir() order. When specifying a preferred pack, all of that works fine, because duplicate objects are correctly resolved in favor of the copy in the preferred pack, and the preferred pack sorts first in the object order. "Sorting first" is critical, because the bitmap code relies on finding out which pack holds the first object in the MIDX's pseudo pack-order to determine which pack is preferred. But if we didn't specify a preferred pack, and the pack which comes first in readdir() order does not also have the lowest timestamp, then it's possible that that pack (the one that sorts first in pseudo-pack order, which the bitmap code will treat as the preferred one) did *not* have all duplicate objects resolved in its favor, resulting in breakage. The fix is simple: pick a (semi-arbitrary, non-empty) preferred pack when none was specified. This forces that pack to have duplicates resolved in its favor, and (critically) to sort first in pseudo-pack order. Unfortunately, testing this behavior portably isn't possible, since it depends on readdir() order which isn't guaranteed by POSIX. (Note that multi-pack reachability bitmaps have yet to be implemented; so in that sense this patch is fixing a bug which does not yet exist. But by having this patch beforehand, we can prevent the bug from ever materializing.) Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-08-31 20:52:04 +00:00
warning(_("unknown preferred pack: '%s'"),
preferred_pack_name);
} else if (ctx.nr &&
(flags & (MIDX_WRITE_REV_INDEX | MIDX_WRITE_BITMAP))) {
midx: infer preferred pack when not given one In 9218c6a40c (midx: allow marking a pack as preferred, 2021-03-30), the multi-pack index code learned how to select a pack which all duplicate objects are selected from. That is, if an object appears in multiple packs, select the copy in the preferred pack before breaking ties according to the other rules like pack mtime and readdir() order. Not specifying a preferred pack can cause serious problems with multi-pack reachability bitmaps, because these bitmaps rely on having at least one pack from which all duplicates are selected. Not having such a pack causes problems with the code in pack-objects to reuse packs verbatim (e.g., that code assumes that a delta object in a chunk of pack sent verbatim will have its base object sent from the same pack). So why does not marking a pack preferred cause problems here? The reason is roughly as follows: - Ties are broken (when handling duplicate objects) by sorting according to midx_oid_compare(), which sorts objects by OID, preferred-ness, pack mtime, and finally pack ID (more on that later). - The psuedo pack-order (described in Documentation/technical/pack-format.txt under the section "multi-pack-index reverse indexes") is computed by midx_pack_order(), and sorts by pack ID and pack offset, with preferred packs sorting first. - But! Pack IDs come from incrementing the pack count in add_pack_to_midx(), which is a callback to for_each_file_in_pack_dir(), meaning that pack IDs are assigned in readdir() order. When specifying a preferred pack, all of that works fine, because duplicate objects are correctly resolved in favor of the copy in the preferred pack, and the preferred pack sorts first in the object order. "Sorting first" is critical, because the bitmap code relies on finding out which pack holds the first object in the MIDX's pseudo pack-order to determine which pack is preferred. But if we didn't specify a preferred pack, and the pack which comes first in readdir() order does not also have the lowest timestamp, then it's possible that that pack (the one that sorts first in pseudo-pack order, which the bitmap code will treat as the preferred one) did *not* have all duplicate objects resolved in its favor, resulting in breakage. The fix is simple: pick a (semi-arbitrary, non-empty) preferred pack when none was specified. This forces that pack to have duplicates resolved in its favor, and (critically) to sort first in pseudo-pack order. Unfortunately, testing this behavior portably isn't possible, since it depends on readdir() order which isn't guaranteed by POSIX. (Note that multi-pack reachability bitmaps have yet to be implemented; so in that sense this patch is fixing a bug which does not yet exist. But by having this patch beforehand, we can prevent the bug from ever materializing.) Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-08-31 20:52:04 +00:00
struct packed_git *oldest = ctx.info[ctx.preferred_pack_idx].p;
ctx.preferred_pack_idx = 0;
if (packs_to_drop && packs_to_drop->nr)
BUG("cannot write a MIDX bitmap during expiration");
/*
* set a preferred pack when writing a bitmap to ensure that
* the pack from which the first object is selected in pseudo
* pack-order has all of its objects selected from that pack
* (and not another pack containing a duplicate)
*/
for (i = 1; i < ctx.nr; i++) {
struct packed_git *p = ctx.info[i].p;
if (!oldest->num_objects || p->mtime < oldest->mtime) {
oldest = p;
ctx.preferred_pack_idx = i;
}
}
if (!oldest->num_objects) {
/*
* If all packs are empty; unset the preferred index.
* This is acceptable since there will be no duplicate
* objects to resolve, so the preferred value doesn't
* matter.
*/
ctx.preferred_pack_idx = -1;
}
} else {
/*
* otherwise don't mark any pack as preferred to avoid
* interfering with expiration logic below
*/
ctx.preferred_pack_idx = -1;
}
if (ctx.preferred_pack_idx > -1) {
struct packed_git *preferred = ctx.info[ctx.preferred_pack_idx].p;
if (!preferred->num_objects) {
error(_("cannot select preferred pack %s with no objects"),
preferred->pack_name);
result = 1;
goto cleanup;
}
}
ctx.entries = get_sorted_entries(ctx.m, ctx.info, ctx.nr, &ctx.entries_nr,
ctx.preferred_pack_idx);
ctx.large_offsets_needed = 0;
for (i = 0; i < ctx.entries_nr; i++) {
if (ctx.entries[i].offset > 0x7fffffff)
ctx.num_large_offsets++;
if (ctx.entries[i].offset > 0xffffffff)
ctx.large_offsets_needed = 1;
}
QSORT(ctx.info, ctx.nr, pack_info_compare);
if (packs_to_drop && packs_to_drop->nr) {
int drop_index = 0;
int missing_drops = 0;
for (i = 0; i < ctx.nr && drop_index < packs_to_drop->nr; i++) {
int cmp = strcmp(ctx.info[i].pack_name,
packs_to_drop->items[drop_index].string);
if (!cmp) {
drop_index++;
ctx.info[i].expired = 1;
} else if (cmp > 0) {
error(_("did not see pack-file %s to drop"),
packs_to_drop->items[drop_index].string);
drop_index++;
missing_drops++;
i--;
} else {
ctx.info[i].expired = 0;
}
}
if (missing_drops) {
result = 1;
goto cleanup;
}
}
/*
* pack_perm stores a permutation between pack-int-ids from the
* previous multi-pack-index to the new one we are writing:
*
* pack_perm[old_id] = new_id
*/
ALLOC_ARRAY(ctx.pack_perm, ctx.nr);
for (i = 0; i < ctx.nr; i++) {
if (ctx.info[i].expired) {
dropped_packs++;
ctx.pack_perm[ctx.info[i].orig_pack_int_id] = PACK_EXPIRED;
} else {
ctx.pack_perm[ctx.info[i].orig_pack_int_id] = i - dropped_packs;
}
}
for (i = 0; i < ctx.nr; i++) {
if (!ctx.info[i].expired)
pack_name_concat_len += strlen(ctx.info[i].pack_name) + 1;
}
/* Check that the preferred pack wasn't expired (if given). */
if (preferred_pack_name) {
struct pack_info *preferred = bsearch(preferred_pack_name,
ctx.info, ctx.nr,
sizeof(*ctx.info),
idx_or_pack_name_cmp);
midx: infer preferred pack when not given one In 9218c6a40c (midx: allow marking a pack as preferred, 2021-03-30), the multi-pack index code learned how to select a pack which all duplicate objects are selected from. That is, if an object appears in multiple packs, select the copy in the preferred pack before breaking ties according to the other rules like pack mtime and readdir() order. Not specifying a preferred pack can cause serious problems with multi-pack reachability bitmaps, because these bitmaps rely on having at least one pack from which all duplicates are selected. Not having such a pack causes problems with the code in pack-objects to reuse packs verbatim (e.g., that code assumes that a delta object in a chunk of pack sent verbatim will have its base object sent from the same pack). So why does not marking a pack preferred cause problems here? The reason is roughly as follows: - Ties are broken (when handling duplicate objects) by sorting according to midx_oid_compare(), which sorts objects by OID, preferred-ness, pack mtime, and finally pack ID (more on that later). - The psuedo pack-order (described in Documentation/technical/pack-format.txt under the section "multi-pack-index reverse indexes") is computed by midx_pack_order(), and sorts by pack ID and pack offset, with preferred packs sorting first. - But! Pack IDs come from incrementing the pack count in add_pack_to_midx(), which is a callback to for_each_file_in_pack_dir(), meaning that pack IDs are assigned in readdir() order. When specifying a preferred pack, all of that works fine, because duplicate objects are correctly resolved in favor of the copy in the preferred pack, and the preferred pack sorts first in the object order. "Sorting first" is critical, because the bitmap code relies on finding out which pack holds the first object in the MIDX's pseudo pack-order to determine which pack is preferred. But if we didn't specify a preferred pack, and the pack which comes first in readdir() order does not also have the lowest timestamp, then it's possible that that pack (the one that sorts first in pseudo-pack order, which the bitmap code will treat as the preferred one) did *not* have all duplicate objects resolved in its favor, resulting in breakage. The fix is simple: pick a (semi-arbitrary, non-empty) preferred pack when none was specified. This forces that pack to have duplicates resolved in its favor, and (critically) to sort first in pseudo-pack order. Unfortunately, testing this behavior portably isn't possible, since it depends on readdir() order which isn't guaranteed by POSIX. (Note that multi-pack reachability bitmaps have yet to be implemented; so in that sense this patch is fixing a bug which does not yet exist. But by having this patch beforehand, we can prevent the bug from ever materializing.) Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-08-31 20:52:04 +00:00
if (preferred) {
uint32_t perm = ctx.pack_perm[preferred->orig_pack_int_id];
if (perm == PACK_EXPIRED)
warning(_("preferred pack '%s' is expired"),
preferred_pack_name);
}
}
if (pack_name_concat_len % MIDX_CHUNK_ALIGNMENT)
pack_name_concat_len += MIDX_CHUNK_ALIGNMENT -
(pack_name_concat_len % MIDX_CHUNK_ALIGNMENT);
hold_lock_file_for_update(&lk, midx_name.buf, LOCK_DIE_ON_ERROR);
f = hashfd(get_lock_file_fd(&lk), get_lock_file_path(&lk));
if (ctx.nr - dropped_packs == 0) {
error(_("no pack files to index."));
result = 1;
goto cleanup;
}
midx: prevent writing a .bitmap without any objects When trying to write a MIDX, we already prevent the case where there weren't any packs present, and thus we would have written an empty MIDX. But there is another "empty" case, which is more interesting, and we don't yet handle. If we try to write a MIDX which has at least one pack, but those packs together don't contain any objects, we will encounter a BUG() when trying to use the bitmap corresponding to that MIDX, like so: $ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0 (note that in the above reproduction, both `--use-bitmap-index` and `--stdout` are important, since without the former we won't even both to load the .bitmap, and without the latter we wont attempt pack reuse). The problem occurs when we try to discover the identity of the preferred pack to determine which range if any of existing packs we can reuse verbatim. This path is: `reuse_packfile_objects()` -> `reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`. #4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394 #5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431 #6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>, entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452 #7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658 #8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765 #9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154 Since neither the .bitmap or MIDX stores the identity of the preferred pack, we infer it by trying to load the first object in pseudo-pack order, and then asking the MIDX which pack was chosen to represent that object. But this fails our bounds check, since there are zero objects in the MIDX to begin with, which results in the BUG(). We could catch this more carefully in `midx_preferred_pack()`, but signaling the absence of a preferred pack out to all of its callers is somewhat awkward. Instead, let's avoid writing a MIDX .bitmap without any objects altogether. We catch this case in `write_midx_internal()`, and emit a warning if the caller indicated they wanted to write a bitmap before clearing out the relevant flags. If we somehow got to write_midx_bitmap(), then we will call BUG(), but this should now be an unreachable path. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-09 19:26:47 +00:00
if (!ctx.entries_nr) {
if (flags & MIDX_WRITE_BITMAP)
warning(_("refusing to write multi-pack .bitmap without any objects"));
flags &= ~(MIDX_WRITE_REV_INDEX | MIDX_WRITE_BITMAP);
}
cf = init_chunkfile(f);
add_chunk(cf, MIDX_CHUNKID_PACKNAMES, pack_name_concat_len,
write_midx_pack_names);
add_chunk(cf, MIDX_CHUNKID_OIDFANOUT, MIDX_CHUNK_FANOUT_SIZE,
write_midx_oid_fanout);
add_chunk(cf, MIDX_CHUNKID_OIDLOOKUP,
st_mult(ctx.entries_nr, the_hash_algo->rawsz),
write_midx_oid_lookup);
add_chunk(cf, MIDX_CHUNKID_OBJECTOFFSETS,
st_mult(ctx.entries_nr, MIDX_CHUNK_OFFSET_WIDTH),
write_midx_object_offsets);
if (ctx.large_offsets_needed)
add_chunk(cf, MIDX_CHUNKID_LARGEOFFSETS,
st_mult(ctx.num_large_offsets,
MIDX_CHUNK_LARGE_OFFSET_WIDTH),
write_midx_large_offsets);
midx.c: make changing the preferred pack safe The previous patch demonstrates a bug where a MIDX's auxiliary object order can become out of sync with a MIDX bitmap. This is because of two confounding factors: - First, the object order is stored in a file which is named according to the multi-pack index's checksum, and the MIDX does not store the object order. This means that the object order can change without altering the checksum. - But the .rev file is moved into place with finalize_object_file(), which link(2)'s the file into place instead of renaming it. For us, that means that a modified .rev file will not be moved into place if MIDX's checksum was unchanged. This fix is to force the MIDX's checksum to change when the preferred pack changes but the set of packs contained in the MIDX does not. In other words, when the object order changes, the MIDX's checksum needs to change with it (regardless of whether the MIDX is tracking the same or different packs). This prevents a race whereby changing the object order (but not the packs themselves) enables a reader to see the new .rev file with the old MIDX, or similarly seeing the new bitmap with the old object order. But why can't we just stop hardlinking the .rev into place instead adding additional data to the MIDX? Suppose that's what we did. Then when we go to generate the new bitmap, we'll load the old MIDX bitmap, along with the MIDX that it references. That's fine, since the new MIDX isn't moved into place until after the new bitmap is generated. But the new object order *has* been moved into place. So we'll read the old bitmaps in the new order when generating the new bitmap file, meaning that without this secondary change, bitmap generation itself would become a victim of the race described here. This can all be prevented by forcing the MIDX's checksum to change when the object order does. By embedding the entire object order into the MIDX, we do just that. That is, the MIDX's checksum will change in response to any perturbation of the underlying object order. In t5326, this will cause the MIDX's checksum to update (even without changing the set of packs in the MIDX), preventing the stale read problem. Note that this makes it safe to continue to link(2) the MIDX .rev file into place, since it is now impossible to have a .rev file that is out-of-sync with the MIDX whose checksum it references. (But we will do away with MIDX .rev files later in this series anyway, so this is somewhat of a moot point). In theory, it is possible to store a "fingerprint" of the full object order here, so long as that fingerprint changes at least as often as the full object order does. Some possibilities here include storing the identity of the preferred pack, along with the mtimes of the non-preferred packs in a consistent order. But storing a limited part of the information makes it difficult to reason about whether or not there are gaps between the two that would cause us to get bitten by this bug again. Signed-off-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:03 +00:00
if (flags & (MIDX_WRITE_REV_INDEX | MIDX_WRITE_BITMAP)) {
ctx.pack_order = midx_pack_order(&ctx);
add_chunk(cf, MIDX_CHUNKID_REVINDEX,
st_mult(ctx.entries_nr, sizeof(uint32_t)),
midx.c: make changing the preferred pack safe The previous patch demonstrates a bug where a MIDX's auxiliary object order can become out of sync with a MIDX bitmap. This is because of two confounding factors: - First, the object order is stored in a file which is named according to the multi-pack index's checksum, and the MIDX does not store the object order. This means that the object order can change without altering the checksum. - But the .rev file is moved into place with finalize_object_file(), which link(2)'s the file into place instead of renaming it. For us, that means that a modified .rev file will not be moved into place if MIDX's checksum was unchanged. This fix is to force the MIDX's checksum to change when the preferred pack changes but the set of packs contained in the MIDX does not. In other words, when the object order changes, the MIDX's checksum needs to change with it (regardless of whether the MIDX is tracking the same or different packs). This prevents a race whereby changing the object order (but not the packs themselves) enables a reader to see the new .rev file with the old MIDX, or similarly seeing the new bitmap with the old object order. But why can't we just stop hardlinking the .rev into place instead adding additional data to the MIDX? Suppose that's what we did. Then when we go to generate the new bitmap, we'll load the old MIDX bitmap, along with the MIDX that it references. That's fine, since the new MIDX isn't moved into place until after the new bitmap is generated. But the new object order *has* been moved into place. So we'll read the old bitmaps in the new order when generating the new bitmap file, meaning that without this secondary change, bitmap generation itself would become a victim of the race described here. This can all be prevented by forcing the MIDX's checksum to change when the object order does. By embedding the entire object order into the MIDX, we do just that. That is, the MIDX's checksum will change in response to any perturbation of the underlying object order. In t5326, this will cause the MIDX's checksum to update (even without changing the set of packs in the MIDX), preventing the stale read problem. Note that this makes it safe to continue to link(2) the MIDX .rev file into place, since it is now impossible to have a .rev file that is out-of-sync with the MIDX whose checksum it references. (But we will do away with MIDX .rev files later in this series anyway, so this is somewhat of a moot point). In theory, it is possible to store a "fingerprint" of the full object order here, so long as that fingerprint changes at least as often as the full object order does. Some possibilities here include storing the identity of the preferred pack, along with the mtimes of the non-preferred packs in a consistent order. But storing a limited part of the information makes it difficult to reason about whether or not there are gaps between the two that would cause us to get bitten by this bug again. Signed-off-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:03 +00:00
write_midx_revindex);
}
write_midx_header(f, get_num_chunks(cf), ctx.nr - dropped_packs);
write_chunkfile(cf, &ctx);
finalize_hashfile(f, midx_hash, FSYNC_COMPONENT_PACK_METADATA,
CSUM_FSYNC | CSUM_HASH_IN_STREAM);
free_chunkfile(cf);
midx: read `RIDX` chunk when present When a MIDX contains the new `RIDX` chunk, ensure that the reverse index is read from it instead of the on-disk .rev file. Since we need to encode the object order in the MIDX itself for correctness reasons, there is no point in storing the same data again outside of the MIDX. So, this patch stops writing separate .rev files, and reads it out of the MIDX itself. This is possible to do with relatively little new code, since the format of the RIDX chunk is identical to the data in the .rev file. In other words, we can implement this by pointing the `revindex_data` field at the reverse index chunk of the MIDX instead of the .rev file without any other changes. Note that we have two knobs that are adjusted for the new tests: GIT_TEST_MIDX_WRITE_REV and GIT_TEST_MIDX_READ_RIDX. The former controls whether the MIDX .rev is written at all, and the latter controls whether we read the MIDX's RIDX chunk. Both are necessary to ensure that the test added at the beginning of this series continues to work. This is because we always need to write the RIDX chunk in the MIDX in order to change its checksum, but we want to make sure reading the existing .rev file still works (since the RIDX chunk takes precedence by default). Arguably this isn't a very interesting mode to test, because the precedence rules mean that we'll always read the RIDX chunk over the .rev file. But it makes it impossible for a user to induce corruption in their repository by adjusting the test knobs (since if we had an either/or knob they could stop writing the RIDX chunk, allowing them to tweak the MIDX's object order without changing its checksum). Signed-off-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:17 +00:00
if (flags & MIDX_WRITE_REV_INDEX &&
git_env_bool("GIT_TEST_MIDX_WRITE_REV", 0))
write_midx_reverse_index(midx_name.buf, midx_hash, &ctx);
if (flags & MIDX_WRITE_BITMAP) {
struct packing_data pdata;
struct commit **commits;
uint32_t commits_nr;
if (!ctx.entries_nr)
BUG("cannot write a bitmap without any objects");
prepare_midx_packing_data(&pdata, &ctx);
commits = find_commits_for_midx_bitmap(&commits_nr, refs_snapshot, &ctx);
midx: reduce memory pressure while writing bitmaps We noticed that some 'git multi-pack-index write --bitmap' processes were running with very high memory. It turns out that a lot of this memory is required to store a list of every object in the written multi-pack-index, with a second copy that has additional information used for the bitmap writing logic. Using 'valgrind --tool=massif' before this change, the following chart shows how memory load increased and was maintained throughout the process: GB 4.102^ :: | @ @::@@::@@::::::::@::::::@@:#:::::::::::::@@:: : | :::::@@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :::: :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :::: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | : :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | : :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @ :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @ :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @::: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @::: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @::: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @::: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : 0 +---------------------------------------------------------------> It turns out that the 'struct write_midx_context' data is persisting through the life of the process, including the 'entries' array. This array is used last inside find_commits_for_midx_bitmap() within write_midx_bitmap(). If we free (and nullify) the array at that point, we can free a decent chunk of memory before the bitmap logic adds more to the memory footprint. Here is the massif memory load chart after this change: GB 3.111^ # | # :::::::::::@::::::::::::::@ | # ::::::::::::::::::::::::: : :: : @:: ::::: :: ::@ | @# :::::::::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | :::@#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | :: @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | :: @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | :: @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ 0 +---------------------------------------------------------------> The previous change introduced a refactoring of write_midx_bitmap() to make it more clear how much of the 'struct write_midx_context' instance is needed at different parts of the process. In addition, the following defensive programming measures were put in place: 1. Using FREE_AND_NULL() we will at least get a segfault from reading a NULL pointer instead of a use-after-free. 2. 'entries_nr' is also set to zero to make any loop that would iterate over the entries be trivial. 3. Add significant comments in write_midx_internal() to add warnings for future authors who might accidentally add references to this cleared memory. Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-07-19 15:26:06 +00:00
/*
* The previous steps translated the information from
* 'entries' into information suitable for constructing
* bitmaps. We no longer need that array, so clear it to
* reduce memory pressure.
*/
FREE_AND_NULL(ctx.entries);
ctx.entries_nr = 0;
if (write_midx_bitmap(midx_name.buf, midx_hash, &pdata,
commits, commits_nr, ctx.pack_order,
flags) < 0) {
error(_("could not write multi-pack bitmap"));
result = 1;
goto cleanup;
}
}
midx: reduce memory pressure while writing bitmaps We noticed that some 'git multi-pack-index write --bitmap' processes were running with very high memory. It turns out that a lot of this memory is required to store a list of every object in the written multi-pack-index, with a second copy that has additional information used for the bitmap writing logic. Using 'valgrind --tool=massif' before this change, the following chart shows how memory load increased and was maintained throughout the process: GB 4.102^ :: | @ @::@@::@@::::::::@::::::@@:#:::::::::::::@@:: : | :::::@@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :::: :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :::: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | : :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | : :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @ :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @ :: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @::: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @::: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @::: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : | @::: :: : :: @@:@: @ ::@ ::: ::::@: ::: @@:#:::::: :: : :@ :: : 0 +---------------------------------------------------------------> It turns out that the 'struct write_midx_context' data is persisting through the life of the process, including the 'entries' array. This array is used last inside find_commits_for_midx_bitmap() within write_midx_bitmap(). If we free (and nullify) the array at that point, we can free a decent chunk of memory before the bitmap logic adds more to the memory footprint. Here is the massif memory load chart after this change: GB 3.111^ # | # :::::::::::@::::::::::::::@ | # ::::::::::::::::::::::::: : :: : @:: ::::: :: ::@ | @# :::::::::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | :::@#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | :: @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | :: @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ | :: @#::: ::: :::::: :::: :: : :::::::: : :: : @:: ::::: :: ::@ 0 +---------------------------------------------------------------> The previous change introduced a refactoring of write_midx_bitmap() to make it more clear how much of the 'struct write_midx_context' instance is needed at different parts of the process. In addition, the following defensive programming measures were put in place: 1. Using FREE_AND_NULL() we will at least get a segfault from reading a NULL pointer instead of a use-after-free. 2. 'entries_nr' is also set to zero to make any loop that would iterate over the entries be trivial. 3. Add significant comments in write_midx_internal() to add warnings for future authors who might accidentally add references to this cleared memory. Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-07-19 15:26:06 +00:00
/*
* NOTE: Do not use ctx.entries beyond this point, since it might
* have been freed in the previous if block.
*/
if (ctx.m)
close_object_store(the_repository->objects);
if (commit_lock_file(&lk) < 0)
die_errno(_("could not write multi-pack-index"));
clear_midx_files_ext(object_dir, ".bitmap", midx_hash);
clear_midx_files_ext(object_dir, ".rev", midx_hash);
cleanup:
for (i = 0; i < ctx.nr; i++) {
if (ctx.info[i].p) {
close_pack(ctx.info[i].p);
free(ctx.info[i].p);
}
free(ctx.info[i].pack_name);
}
free(ctx.info);
free(ctx.entries);
free(ctx.pack_perm);
free(ctx.pack_order);
strbuf_release(&midx_name);
trace2_region_leave("midx", "write_midx_internal", the_repository);
return result;
}
int write_midx_file(const char *object_dir,
const char *preferred_pack_name,
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
const char *refs_snapshot,
unsigned flags)
{
return write_midx_internal(object_dir, NULL, NULL, preferred_pack_name,
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
refs_snapshot, flags);
}
int write_midx_file_only(const char *object_dir,
struct string_list *packs_to_include,
const char *preferred_pack_name,
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
const char *refs_snapshot,
unsigned flags)
{
return write_midx_internal(object_dir, packs_to_include, NULL,
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
preferred_pack_name, refs_snapshot, flags);
}
struct clear_midx_data {
char *keep;
const char *ext;
};
static void clear_midx_file_ext(const char *full_path, size_t full_path_len UNUSED,
const char *file_name, void *_data)
{
struct clear_midx_data *data = _data;
if (!(starts_with(file_name, "multi-pack-index-") &&
ends_with(file_name, data->ext)))
return;
if (data->keep && !strcmp(data->keep, file_name))
return;
if (unlink(full_path))
die_errno(_("failed to remove %s"), full_path);
}
static void clear_midx_files_ext(const char *object_dir, const char *ext,
unsigned char *keep_hash)
{
struct clear_midx_data data;
memset(&data, 0, sizeof(struct clear_midx_data));
if (keep_hash)
data.keep = xstrfmt("multi-pack-index-%s%s",
hash_to_hex(keep_hash), ext);
data.ext = ext;
for_each_file_in_pack_dir(object_dir,
clear_midx_file_ext,
&data);
free(data.keep);
}
void clear_midx_file(struct repository *r)
{
struct strbuf midx = STRBUF_INIT;
get_midx_filename(&midx, r->objects->odb->path);
if (r->objects && r->objects->multi_pack_index) {
close_midx(r->objects->multi_pack_index);
r->objects->multi_pack_index = NULL;
}
if (remove_path(midx.buf))
die(_("failed to clear multi-pack-index at %s"), midx.buf);
clear_midx_files_ext(r->objects->odb->path, ".bitmap", NULL);
clear_midx_files_ext(r->objects->odb->path, ".rev", NULL);
strbuf_release(&midx);
}
static int verify_midx_error;
__attribute__((format (printf, 1, 2)))
static void midx_report(const char *fmt, ...)
{
va_list ap;
verify_midx_error = 1;
va_start(ap, fmt);
vfprintf(stderr, fmt, ap);
fprintf(stderr, "\n");
va_end(ap);
}
struct pair_pos_vs_id
{
uint32_t pos;
uint32_t pack_int_id;
};
static int compare_pair_pos_vs_id(const void *_a, const void *_b)
{
struct pair_pos_vs_id *a = (struct pair_pos_vs_id *)_a;
struct pair_pos_vs_id *b = (struct pair_pos_vs_id *)_b;
return b->pack_int_id - a->pack_int_id;
}
/*
* Limit calls to display_progress() for performance reasons.
* The interval here was arbitrarily chosen.
*/
#define SPARSE_PROGRESS_INTERVAL (1 << 12)
#define midx_display_sparse_progress(progress, n) \
do { \
uint64_t _n = (n); \
if ((_n & (SPARSE_PROGRESS_INTERVAL - 1)) == 0) \
display_progress(progress, _n); \
} while (0)
int verify_midx_file(struct repository *r, const char *object_dir, unsigned flags)
{
struct pair_pos_vs_id *pairs = NULL;
uint32_t i;
struct progress *progress = NULL;
struct multi_pack_index *m = load_multi_pack_index(object_dir, 1);
verify_midx_error = 0;
multi-pack-index: use hash version byte Similar to the commit-graph format, the multi-pack-index format has a byte in the header intended to track the hash version used to write the file. This allows one to interpret the hash length without having the context of the repository config specifying the hash length. This was not modified as part of the SHA-256 work because the hash length was automatically up-shifted due to that config. Since we have this byte available, we can make the file formats more obviously incompatible instead of relying on other context from the repository. Add a new oid_version() method in midx.c similar to the one in commit-graph.c. This is specifically made separate from that implementation to avoid artificially linking the formats. The test impact requires a few more things than the corresponding change in the commit-graph format. Specifically, 'test-tool read-midx' was not writing anything about this header value to output. Since the value available in 'struct multi_pack_index' is hash_len instead of a version value, we output "20" or "32" instead of "1" or "2". Since we want a user to not have their Git commands fail if their multi-pack-index has the incorrect hash version compared to the repository's hash version, we relax the die() to an error() in load_multi_pack_index(). This has some effect on 'git multi-pack-index verify' as we need to check that a failed parse of a file that exists is actually a verify error. For that test that checks the hash version matches, we change the corrupted byte from "2" to "3" to ensure the test fails for both hash algorithms. Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-17 14:04:48 +00:00
if (!m) {
int result = 0;
struct stat sb;
struct strbuf filename = STRBUF_INIT;
get_midx_filename(&filename, object_dir);
if (!stat(filename.buf, &sb)) {
multi-pack-index: use hash version byte Similar to the commit-graph format, the multi-pack-index format has a byte in the header intended to track the hash version used to write the file. This allows one to interpret the hash length without having the context of the repository config specifying the hash length. This was not modified as part of the SHA-256 work because the hash length was automatically up-shifted due to that config. Since we have this byte available, we can make the file formats more obviously incompatible instead of relying on other context from the repository. Add a new oid_version() method in midx.c similar to the one in commit-graph.c. This is specifically made separate from that implementation to avoid artificially linking the formats. The test impact requires a few more things than the corresponding change in the commit-graph format. Specifically, 'test-tool read-midx' was not writing anything about this header value to output. Since the value available in 'struct multi_pack_index' is hash_len instead of a version value, we output "20" or "32" instead of "1" or "2". Since we want a user to not have their Git commands fail if their multi-pack-index has the incorrect hash version compared to the repository's hash version, we relax the die() to an error() in load_multi_pack_index(). This has some effect on 'git multi-pack-index verify' as we need to check that a failed parse of a file that exists is actually a verify error. For that test that checks the hash version matches, we change the corrupted byte from "2" to "3" to ensure the test fails for both hash algorithms. Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-17 14:04:48 +00:00
error(_("multi-pack-index file exists, but failed to parse"));
result = 1;
}
strbuf_release(&filename);
multi-pack-index: use hash version byte Similar to the commit-graph format, the multi-pack-index format has a byte in the header intended to track the hash version used to write the file. This allows one to interpret the hash length without having the context of the repository config specifying the hash length. This was not modified as part of the SHA-256 work because the hash length was automatically up-shifted due to that config. Since we have this byte available, we can make the file formats more obviously incompatible instead of relying on other context from the repository. Add a new oid_version() method in midx.c similar to the one in commit-graph.c. This is specifically made separate from that implementation to avoid artificially linking the formats. The test impact requires a few more things than the corresponding change in the commit-graph format. Specifically, 'test-tool read-midx' was not writing anything about this header value to output. Since the value available in 'struct multi_pack_index' is hash_len instead of a version value, we output "20" or "32" instead of "1" or "2". Since we want a user to not have their Git commands fail if their multi-pack-index has the incorrect hash version compared to the repository's hash version, we relax the die() to an error() in load_multi_pack_index(). This has some effect on 'git multi-pack-index verify' as we need to check that a failed parse of a file that exists is actually a verify error. For that test that checks the hash version matches, we change the corrupted byte from "2" to "3" to ensure the test fails for both hash algorithms. Helped-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-17 14:04:48 +00:00
return result;
}
if (!midx_checksum_valid(m))
midx_report(_("incorrect checksum"));
if (flags & MIDX_PROGRESS)
progress = start_delayed_progress(_("Looking for referenced packfiles"),
m->num_packs);
for (i = 0; i < m->num_packs; i++) {
if (prepare_midx_pack(r, m, i))
midx_report("failed to load pack in position %d", i);
display_progress(progress, i + 1);
}
stop_progress(&progress);
if (m->num_objects == 0) {
midx_report(_("the midx contains no oid"));
/*
* Remaining tests assume that we have objects, so we can
* return here.
*/
goto cleanup;
}
if (flags & MIDX_PROGRESS)
progress = start_sparse_progress(_("Verifying OID order in multi-pack-index"),
m->num_objects - 1);
for (i = 0; i < m->num_objects - 1; i++) {
struct object_id oid1, oid2;
nth_midxed_object_oid(&oid1, m, i);
nth_midxed_object_oid(&oid2, m, i + 1);
if (oidcmp(&oid1, &oid2) >= 0)
midx_report(_("oid lookup out of order: oid[%d] = %s >= %s = oid[%d]"),
i, oid_to_hex(&oid1), oid_to_hex(&oid2), i + 1);
midx_display_sparse_progress(progress, i + 1);
}
stop_progress(&progress);
/*
* Create an array mapping each object to its packfile id. Sort it
* to group the objects by packfile. Use this permutation to visit
* each of the objects and only require 1 packfile to be open at a
* time.
*/
ALLOC_ARRAY(pairs, m->num_objects);
for (i = 0; i < m->num_objects; i++) {
pairs[i].pos = i;
pairs[i].pack_int_id = nth_midxed_pack_int_id(m, i);
}
if (flags & MIDX_PROGRESS)
progress = start_sparse_progress(_("Sorting objects by packfile"),
m->num_objects);
display_progress(progress, 0); /* TODO: Measure QSORT() progress */
QSORT(pairs, m->num_objects, compare_pair_pos_vs_id);
stop_progress(&progress);
if (flags & MIDX_PROGRESS)
progress = start_sparse_progress(_("Verifying object offsets"), m->num_objects);
for (i = 0; i < m->num_objects; i++) {
struct object_id oid;
struct pack_entry e;
off_t m_offset, p_offset;
if (i > 0 && pairs[i-1].pack_int_id != pairs[i].pack_int_id &&
m->packs[pairs[i-1].pack_int_id])
{
close_pack_fd(m->packs[pairs[i-1].pack_int_id]);
close_pack_index(m->packs[pairs[i-1].pack_int_id]);
}
nth_midxed_object_oid(&oid, m, pairs[i].pos);
if (!fill_midx_entry(r, &oid, &e, m)) {
midx_report(_("failed to load pack entry for oid[%d] = %s"),
pairs[i].pos, oid_to_hex(&oid));
continue;
}
if (open_pack_index(e.p)) {
midx_report(_("failed to load pack-index for packfile %s"),
e.p->pack_name);
break;
}
m_offset = e.offset;
p_offset = find_pack_entry_one(oid.hash, e.p);
if (m_offset != p_offset)
midx_report(_("incorrect object offset for oid[%d] = %s: %"PRIx64" != %"PRIx64),
pairs[i].pos, oid_to_hex(&oid), m_offset, p_offset);
midx_display_sparse_progress(progress, i + 1);
}
stop_progress(&progress);
cleanup:
free(pairs);
close_midx(m);
return verify_midx_error;
}
int expire_midx_packs(struct repository *r, const char *object_dir, unsigned flags)
{
uint32_t i, *count, result = 0;
struct string_list packs_to_drop = STRING_LIST_INIT_DUP;
midx.c: lookup MIDX by object directory during expire Before a new MIDX can be written, expire_midx_packs() first loads the existing MIDX, figures out which packs can be expired, and then writes a new MIDX based on that information. In order to load the existing MIDX, it uses load_multi_pack_index(), which mmaps the multi-pack-index file, but does not store the resulting `struct multi_pack_index *` in the object store. write_midx_internal() also needs to open the existing MIDX, and it does so by iterating the results of get_multi_pack_index(), so that it reuses the same pointer held by the object store. But before it can move the new MIDX into place, it close_object_store() to munmap() the multi-pack-index file to accommodate platforms like Windows which don't allow overwriting files which are memory mapped. That's where things get weird. Since expire_midx_packs has its own *separate* memory mapped copy of the MIDX, the MIDX file is still memory mapped! Interestingly, this doesn't seem to cause a problem in our tests. (I believe that this has much more to do with my own lack of familiarity with Windows than it does a lack of coverage in our tests). In any case, we can side-step the whole issue by teaching expire_midx_packs() to use the `struct multi_pack_index` pointer it found via the object store instead of maintain its own copy. That way, when write_midx_internal() calls `close_object_store()`, we know that there are no memory mapped copies of the MIDX laying around. A couple of other small notes about this patch: - As far as I can tell, passing `local == 1` to the call to load_multi_pack_index() was an error, since object_dir could be an alternate. But it doesn't matter, since even though we write `m->local = 1`, we never read that field back later on. - Setting `m = NULL` after write_midx_internal() was likely to prevent a double-free back from when that function took a `struct multi_pack_index *` that it called close_midx() on itself. We can rely on write_midx_internal() to call that for us now. Finally, this enforces the same "the value of --object-dir must be the local object store, or an alternate" rule from f57a739691 (midx: avoid opening multiple MIDXs when writing, 2021-09-01) to the `expire` sub-command, too. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-08 21:46:32 +00:00
struct multi_pack_index *m = lookup_multi_pack_index(r, object_dir);
struct progress *progress = NULL;
if (!m)
return 0;
CALLOC_ARRAY(count, m->num_packs);
if (flags & MIDX_PROGRESS)
progress = start_delayed_progress(_("Counting referenced objects"),
m->num_objects);
for (i = 0; i < m->num_objects; i++) {
int pack_int_id = nth_midxed_pack_int_id(m, i);
count[pack_int_id]++;
display_progress(progress, i + 1);
}
stop_progress(&progress);
if (flags & MIDX_PROGRESS)
progress = start_delayed_progress(_("Finding and deleting unreferenced packfiles"),
m->num_packs);
for (i = 0; i < m->num_packs; i++) {
char *pack_name;
display_progress(progress, i + 1);
if (count[i])
continue;
if (prepare_midx_pack(r, m, i))
continue;
if (m->packs[i]->pack_keep || m->packs[i]->is_cruft)
continue;
pack_name = xstrdup(m->packs[i]->pack_name);
close_pack(m->packs[i]);
string_list_insert(&packs_to_drop, m->pack_names[i]);
unlink_pack_path(pack_name, 0);
free(pack_name);
}
stop_progress(&progress);
free(count);
midx.c: lookup MIDX by object directory during expire Before a new MIDX can be written, expire_midx_packs() first loads the existing MIDX, figures out which packs can be expired, and then writes a new MIDX based on that information. In order to load the existing MIDX, it uses load_multi_pack_index(), which mmaps the multi-pack-index file, but does not store the resulting `struct multi_pack_index *` in the object store. write_midx_internal() also needs to open the existing MIDX, and it does so by iterating the results of get_multi_pack_index(), so that it reuses the same pointer held by the object store. But before it can move the new MIDX into place, it close_object_store() to munmap() the multi-pack-index file to accommodate platforms like Windows which don't allow overwriting files which are memory mapped. That's where things get weird. Since expire_midx_packs has its own *separate* memory mapped copy of the MIDX, the MIDX file is still memory mapped! Interestingly, this doesn't seem to cause a problem in our tests. (I believe that this has much more to do with my own lack of familiarity with Windows than it does a lack of coverage in our tests). In any case, we can side-step the whole issue by teaching expire_midx_packs() to use the `struct multi_pack_index` pointer it found via the object store instead of maintain its own copy. That way, when write_midx_internal() calls `close_object_store()`, we know that there are no memory mapped copies of the MIDX laying around. A couple of other small notes about this patch: - As far as I can tell, passing `local == 1` to the call to load_multi_pack_index() was an error, since object_dir could be an alternate. But it doesn't matter, since even though we write `m->local = 1`, we never read that field back later on. - Setting `m = NULL` after write_midx_internal() was likely to prevent a double-free back from when that function took a `struct multi_pack_index *` that it called close_midx() on itself. We can rely on write_midx_internal() to call that for us now. Finally, this enforces the same "the value of --object-dir must be the local object store, or an alternate" rule from f57a739691 (midx: avoid opening multiple MIDXs when writing, 2021-09-01) to the `expire` sub-command, too. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-08 21:46:32 +00:00
if (packs_to_drop.nr)
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
result = write_midx_internal(object_dir, NULL, &packs_to_drop, NULL, NULL, flags);
string_list_clear(&packs_to_drop, 0);
midx.c: lookup MIDX by object directory during expire Before a new MIDX can be written, expire_midx_packs() first loads the existing MIDX, figures out which packs can be expired, and then writes a new MIDX based on that information. In order to load the existing MIDX, it uses load_multi_pack_index(), which mmaps the multi-pack-index file, but does not store the resulting `struct multi_pack_index *` in the object store. write_midx_internal() also needs to open the existing MIDX, and it does so by iterating the results of get_multi_pack_index(), so that it reuses the same pointer held by the object store. But before it can move the new MIDX into place, it close_object_store() to munmap() the multi-pack-index file to accommodate platforms like Windows which don't allow overwriting files which are memory mapped. That's where things get weird. Since expire_midx_packs has its own *separate* memory mapped copy of the MIDX, the MIDX file is still memory mapped! Interestingly, this doesn't seem to cause a problem in our tests. (I believe that this has much more to do with my own lack of familiarity with Windows than it does a lack of coverage in our tests). In any case, we can side-step the whole issue by teaching expire_midx_packs() to use the `struct multi_pack_index` pointer it found via the object store instead of maintain its own copy. That way, when write_midx_internal() calls `close_object_store()`, we know that there are no memory mapped copies of the MIDX laying around. A couple of other small notes about this patch: - As far as I can tell, passing `local == 1` to the call to load_multi_pack_index() was an error, since object_dir could be an alternate. But it doesn't matter, since even though we write `m->local = 1`, we never read that field back later on. - Setting `m = NULL` after write_midx_internal() was likely to prevent a double-free back from when that function took a `struct multi_pack_index *` that it called close_midx() on itself. We can rely on write_midx_internal() to call that for us now. Finally, this enforces the same "the value of --object-dir must be the local object store, or an alternate" rule from f57a739691 (midx: avoid opening multiple MIDXs when writing, 2021-09-01) to the `expire` sub-command, too. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-08 21:46:32 +00:00
return result;
}
multi-pack-index: prepare 'repack' subcommand In an environment where the multi-pack-index is useful, it is due to many pack-files and an inability to repack the object store into a single pack-file. However, it is likely that many of these pack-files are rather small, and could be repacked into a slightly larger pack-file without too much effort. It may also be important to ensure the object store is highly available and the repack operation does not interrupt concurrent git commands. Introduce a 'repack' subcommand to 'git multi-pack-index' that takes a '--batch-size' option. The subcommand will inspect the multi-pack-index for referenced pack-files whose size is smaller than the batch size, until collecting a list of pack-files whose sizes sum to larger than the batch size. Then, a new pack-file will be created containing the objects from those pack-files that are referenced by the multi-pack-index. The resulting pack is likely to actually be smaller than the batch size due to compression and the fact that there may be objects in the pack- files that have duplicate copies in other pack-files. The current change introduces the command-line arguments, and we add a test that ensures we parse these options properly. Since we specify a small batch size, we will guarantee that future implementations do not change the list of pack-files. In addition, we hard-code the modified times of the packs in the pack directory to ensure the list of packs sorted by modified time matches the order if sorted by size (ascending). This will be important in a future test. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:26 +00:00
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
struct repack_info {
timestamp_t mtime;
uint32_t referenced_objects;
uint32_t pack_int_id;
};
static int compare_by_mtime(const void *a_, const void *b_)
multi-pack-index: prepare 'repack' subcommand In an environment where the multi-pack-index is useful, it is due to many pack-files and an inability to repack the object store into a single pack-file. However, it is likely that many of these pack-files are rather small, and could be repacked into a slightly larger pack-file without too much effort. It may also be important to ensure the object store is highly available and the repack operation does not interrupt concurrent git commands. Introduce a 'repack' subcommand to 'git multi-pack-index' that takes a '--batch-size' option. The subcommand will inspect the multi-pack-index for referenced pack-files whose size is smaller than the batch size, until collecting a list of pack-files whose sizes sum to larger than the batch size. Then, a new pack-file will be created containing the objects from those pack-files that are referenced by the multi-pack-index. The resulting pack is likely to actually be smaller than the batch size due to compression and the fact that there may be objects in the pack- files that have duplicate copies in other pack-files. The current change introduces the command-line arguments, and we add a test that ensures we parse these options properly. Since we specify a small batch size, we will guarantee that future implementations do not change the list of pack-files. In addition, we hard-code the modified times of the packs in the pack directory to ensure the list of packs sorted by modified time matches the order if sorted by size (ascending). This will be important in a future test. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:26 +00:00
{
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
const struct repack_info *a, *b;
a = (const struct repack_info *)a_;
b = (const struct repack_info *)b_;
if (a->mtime < b->mtime)
return -1;
if (a->mtime > b->mtime)
return 1;
return 0;
}
static int fill_included_packs_all(struct repository *r,
struct multi_pack_index *m,
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
unsigned char *include_pack)
{
uint32_t i, count = 0;
int pack_kept_objects = 0;
repo_config_get_bool(r, "repack.packkeptobjects", &pack_kept_objects);
for (i = 0; i < m->num_packs; i++) {
if (prepare_midx_pack(r, m, i))
continue;
if (!pack_kept_objects && m->packs[i]->pack_keep)
continue;
if (m->packs[i]->is_cruft)
continue;
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
include_pack[i] = 1;
count++;
}
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
return count < 2;
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
}
static int fill_included_packs_batch(struct repository *r,
struct multi_pack_index *m,
unsigned char *include_pack,
size_t batch_size)
{
uint32_t i, packs_to_repack;
size_t total_size;
struct repack_info *pack_info;
int pack_kept_objects = 0;
CALLOC_ARRAY(pack_info, m->num_packs);
repo_config_get_bool(r, "repack.packkeptobjects", &pack_kept_objects);
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
for (i = 0; i < m->num_packs; i++) {
pack_info[i].pack_int_id = i;
if (prepare_midx_pack(r, m, i))
continue;
pack_info[i].mtime = m->packs[i]->mtime;
}
for (i = 0; i < m->num_objects; i++) {
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
uint32_t pack_int_id = nth_midxed_pack_int_id(m, i);
pack_info[pack_int_id].referenced_objects++;
}
QSORT(pack_info, m->num_packs, compare_by_mtime);
total_size = 0;
packs_to_repack = 0;
for (i = 0; total_size < batch_size && i < m->num_packs; i++) {
int pack_int_id = pack_info[i].pack_int_id;
struct packed_git *p = m->packs[pack_int_id];
size_t expected_size;
if (!p)
continue;
if (!pack_kept_objects && p->pack_keep)
continue;
if (p->is_cruft)
continue;
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
if (open_pack_index(p) || !p->num_objects)
continue;
expected_size = st_mult(p->pack_size,
pack_info[i].referenced_objects);
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
expected_size /= p->num_objects;
if (expected_size >= batch_size)
continue;
packs_to_repack++;
total_size += expected_size;
include_pack[pack_int_id] = 1;
}
free(pack_info);
multi-pack-index: repack batches below --batch-size The --batch-size=<size> option of 'git multi-pack-index repack' is intended to limit the amount of work done by the repack. In the case of a large repository, this command should repack a number of small pack-files but leave the large pack-files alone. Most often, the repository has one large pack-file from a 'git clone' operation and number of smaller pack-files from incremental 'git fetch' operations. The issue with '--batch-size' is that it also _prevents_ the repack from happening if the expected size of the resulting pack-file is too small. This was intended as a way to avoid frequent churn of small pack-files, but it has mostly caused confusion when a repository is of "medium" size. That is, not enormous like the Windows OS repository, but also not so small that this incremental repack isn't valuable. The solution presented here is to collect pack-files for repack if their expected size is smaller than the batch-size parameter until either the total expected size exceeds the batch-size or all pack-files are considered. If there are at least two pack-files, then these are combined to a new pack-file whose size should not be too much larger than the batch-size. This new strategy should succeed in keeping the number of pack-files small in these "medium" size repositories. The concern about churn is likely not interesting, as the real control over that is the frequency in which the repack command is run. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-11 15:30:18 +00:00
if (packs_to_repack < 2)
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
return 1;
multi-pack-index: prepare 'repack' subcommand In an environment where the multi-pack-index is useful, it is due to many pack-files and an inability to repack the object store into a single pack-file. However, it is likely that many of these pack-files are rather small, and could be repacked into a slightly larger pack-file without too much effort. It may also be important to ensure the object store is highly available and the repack operation does not interrupt concurrent git commands. Introduce a 'repack' subcommand to 'git multi-pack-index' that takes a '--batch-size' option. The subcommand will inspect the multi-pack-index for referenced pack-files whose size is smaller than the batch size, until collecting a list of pack-files whose sizes sum to larger than the batch size. Then, a new pack-file will be created containing the objects from those pack-files that are referenced by the multi-pack-index. The resulting pack is likely to actually be smaller than the batch size due to compression and the fact that there may be objects in the pack- files that have duplicate copies in other pack-files. The current change introduces the command-line arguments, and we add a test that ensures we parse these options properly. Since we specify a small batch size, we will guarantee that future implementations do not change the list of pack-files. In addition, we hard-code the modified times of the packs in the pack directory to ensure the list of packs sorted by modified time matches the order if sorted by size (ascending). This will be important in a future test. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:26 +00:00
return 0;
}
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
int midx_repack(struct repository *r, const char *object_dir, size_t batch_size, unsigned flags)
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
{
int result = 0;
uint32_t i;
unsigned char *include_pack;
struct child_process cmd = CHILD_PROCESS_INIT;
FILE *cmd_in;
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
struct strbuf base_name = STRBUF_INIT;
struct multi_pack_index *m = lookup_multi_pack_index(r, object_dir);
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
/*
* When updating the default for these configuration
* variables in builtin/repack.c, these must be adjusted
* to match.
*/
int delta_base_offset = 1;
int use_delta_islands = 0;
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
if (!m)
return 0;
CALLOC_ARRAY(include_pack, m->num_packs);
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
if (batch_size) {
if (fill_included_packs_batch(r, m, include_pack, batch_size))
goto cleanup;
} else if (fill_included_packs_all(r, m, include_pack))
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
goto cleanup;
repo_config_get_bool(r, "repack.usedeltabaseoffset", &delta_base_offset);
repo_config_get_bool(r, "repack.usedeltaislands", &use_delta_islands);
strvec_push(&cmd.args, "pack-objects");
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
strbuf_addstr(&base_name, object_dir);
strbuf_addstr(&base_name, "/pack/pack");
strvec_push(&cmd.args, base_name.buf);
if (delta_base_offset)
strvec_push(&cmd.args, "--delta-base-offset");
if (use_delta_islands)
strvec_push(&cmd.args, "--delta-islands");
if (flags & MIDX_PROGRESS)
strvec_push(&cmd.args, "--progress");
else
strvec_push(&cmd.args, "-q");
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
strbuf_release(&base_name);
cmd.git_cmd = 1;
cmd.in = cmd.out = -1;
if (start_command(&cmd)) {
error(_("could not start pack-objects"));
result = 1;
goto cleanup;
}
cmd_in = xfdopen(cmd.in, "w");
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
for (i = 0; i < m->num_objects; i++) {
struct object_id oid;
uint32_t pack_int_id = nth_midxed_pack_int_id(m, i);
if (!include_pack[pack_int_id])
continue;
nth_midxed_object_oid(&oid, m, i);
fprintf(cmd_in, "%s\n", oid_to_hex(&oid));
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
}
fclose(cmd_in);
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
if (finish_command(&cmd)) {
error(_("could not finish pack-objects"));
result = 1;
goto cleanup;
}
midx: preliminary support for `--refs-snapshot` To figure out which commits we can write a bitmap for, the multi-pack index/bitmap code does a reachability traversal, marking any commit which can be found in the MIDX as eligible to receive a bitmap. This approach will cause a problem when multi-pack bitmaps are able to be generated from `git repack`, since the reference tips can change during the repack. Even though we ignore commits that don't exist in the MIDX (when doing a scan of the ref tips), it's possible that a commit in the MIDX reaches something that isn't. This can happen when a multi-pack index contains some pack which refers to loose objects (e.g., if a pack was pushed after starting the repack but before generating the MIDX which depends on an object which is stored as loose in the repository, and by definition isn't included in the multi-pack index). By taking a snapshot of the references before we start repacking, we can close that race window. In the above scenario (where we have a packed object pointing at a loose one), we'll either (a) take a snapshot of the references before seeing the packed one, or (b) take it after, at which point we can guarantee that the loose object will be packed and included in the MIDX. This patch does just that. It writes a temporary "reference snapshot", which is a list of OIDs that are at the ref tips before writing a multi-pack bitmap. References that are "preferred" (i.e,. are a suffix of at least one value of the 'pack.preferBitmapTips' configuration) are marked with a special '+'. The format is simple: one line per commit at each tip, with an optional '+' at the beginning (for preferred references, as described above). When provided, the reference snapshot is used to drive bitmap selection instead of the MIDX code doing its own traversal. When it isn't provided, the usual traversal takes place instead. Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
result = write_midx_internal(object_dir, NULL, NULL, NULL, NULL, flags);
midx: implement midx_repack() To repack with a non-zero batch-size, first sort all pack-files by their modified time. Second, walk those pack-files from oldest to newest, compute their expected size, and add the packs to a list if they are smaller than the given batch-size. Stop when the total expected size is at least the batch size. If the batch size is zero, select all packs in the multi-pack-index. Finally, collect the objects from the multi-pack-index that are in the selected packs and send them to 'git pack-objects'. Write a new multi-pack-index that includes the new pack. Using a batch size of zero is very similar to a standard 'git repack' command, except that we do not delete the old packs and instead rely on the new multi-pack-index to prevent new processes from reading the old packs. This does not disrupt other Git processes that are currently reading the old packs based on the old multi-pack-index. While first designing a 'git multi-pack-index repack' operation, I started by collecting the batches based on the actual size of the objects instead of the size of the pack-files. This allows repacking a large pack-file that has very few referencd objects. However, this came at a significant cost of parsing pack-files instead of simply reading the multi-pack-index and getting the file information for the pack-files. The "expected size" version provides similar behavior, but could skip a pack-file if the average object size is much larger than the actual size of the referenced objects, or can create a large pack if the actual size of the referenced objects is larger than the expected size. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-06-10 23:35:27 +00:00
cleanup:
free(include_pack);
return result;
}