git/t/t7517-per-repo-email.sh

163 lines
5.6 KiB
Bash
Raw Normal View History

#!/bin/sh
#
# Copyright (c) 2016 Dan Aloni
# Copyright (c) 2016 Jeff King
#
test_description='per-repo forced setting of email address'
. ./test-lib.sh
test_expect_success 'setup a likely user.useConfigOnly use case' '
# we want to make sure a reflog is written, since that needs
# a non-strict ident. So be sure we have an actual commit.
test_commit foo &&
sane_unset GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL &&
sane_unset GIT_COMMITTER_NAME GIT_COMMITTER_EMAIL &&
git config user.name "test" &&
git config --global user.useConfigOnly true
'
test_expect_success 'fails committing if clone email is not set' '
test_must_fail git commit --allow-empty -m msg
'
test_expect_success 'fails committing if clone email is not set, but EMAIL set' '
test_must_fail env EMAIL=test@fail.com git commit --allow-empty -m msg
'
test_expect_success 'succeeds committing if clone email is set' '
test_config user.email "test@ok.com" &&
git commit --allow-empty -m msg
'
test_expect_success 'succeeds cloning if global email is not set' '
git clone . clone
'
rebase-interactive: drop early check for valid ident Since the very inception of interactive-rebase in 1b1dce4 (Teach rebase an interactive mode, 2007-06-25), there has been a preemptive check, before looking at any commits, to see whether the user has a valid name/email combination. This is convenient, because it means that we abort the operation before even beginning (rather than just complaining that we are unable to pick a particular commit). However, it does the wrong thing when the rebase does not actually need to generate any new commits (e.g., a fast-forward with no commits to pick, or one where the base stays the same, and we just pick the same commits without rewriting anything). In this case it may complain about the lack of ident, even though one would not be needed to complete the operation. This may seem like mere nit-picking, but because interactive rebase underlies the "preserve-merges" rebase, somebody who has set "pull.rebase" to "preserve" cannot make even a fast-forward pull without a valid ident, as we bail before even realizing the fast-forward nature. This commit drops the extra ident check entirely. This means we rely on individual commands that generate commit objects to complain. So we will continue to notice and prevent cases that actually do create commits, but with one important difference: we fail while actually executing the "pick" operations, and leave the rebase in a conflicted, half-done state. In some ways this is less convenient, but in some ways it is more so; the user can then manually commit or even "git rebase --continue" after setting up their ident (or providing it as a one-off on the command line). Reported-by: Dakota Hawkins <dakotahawkins@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-29 22:31:35 +00:00
test_expect_success 'set up rebase scenarios' '
# temporarily enable an actual ident for this setup
test_config user.email foo@example.com &&
test_commit new &&
git branch side-without-commit HEAD^ &&
git checkout -b side-with-commit HEAD^ &&
test_commit side
'
test_expect_success 'fast-forward rebase does not care about ident' '
git checkout -B tmp side-without-commit &&
git rebase master
'
test_expect_success 'non-fast-forward rebase refuses to write commits' '
test_when_finished "git rebase --abort || true" &&
git checkout -B tmp side-with-commit &&
test_must_fail git rebase master
'
test_expect_success 'fast-forward rebase does not care about ident (interactive)' '
git checkout -B tmp side-without-commit &&
git rebase -i master
'
test_expect_success 'non-fast-forward rebase refuses to write commits (interactive)' '
test_when_finished "git rebase --abort || true" &&
git checkout -B tmp side-with-commit &&
test_must_fail git rebase -i master
'
test_expect_success 'noop interactive rebase does not care about ident' '
git checkout -B tmp side-with-commit &&
git rebase -i HEAD^
'
test_expect_success REBASE_P \
'fast-forward rebase does not care about ident (preserve)' '
rebase-interactive: drop early check for valid ident Since the very inception of interactive-rebase in 1b1dce4 (Teach rebase an interactive mode, 2007-06-25), there has been a preemptive check, before looking at any commits, to see whether the user has a valid name/email combination. This is convenient, because it means that we abort the operation before even beginning (rather than just complaining that we are unable to pick a particular commit). However, it does the wrong thing when the rebase does not actually need to generate any new commits (e.g., a fast-forward with no commits to pick, or one where the base stays the same, and we just pick the same commits without rewriting anything). In this case it may complain about the lack of ident, even though one would not be needed to complete the operation. This may seem like mere nit-picking, but because interactive rebase underlies the "preserve-merges" rebase, somebody who has set "pull.rebase" to "preserve" cannot make even a fast-forward pull without a valid ident, as we bail before even realizing the fast-forward nature. This commit drops the extra ident check entirely. This means we rely on individual commands that generate commit objects to complain. So we will continue to notice and prevent cases that actually do create commits, but with one important difference: we fail while actually executing the "pick" operations, and leave the rebase in a conflicted, half-done state. In some ways this is less convenient, but in some ways it is more so; the user can then manually commit or even "git rebase --continue" after setting up their ident (or providing it as a one-off on the command line). Reported-by: Dakota Hawkins <dakotahawkins@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-29 22:31:35 +00:00
git checkout -B tmp side-without-commit &&
git rebase -p master
'
test_expect_success REBASE_P \
'non-fast-forward rebase refuses to write commits (preserve)' '
rebase-interactive: drop early check for valid ident Since the very inception of interactive-rebase in 1b1dce4 (Teach rebase an interactive mode, 2007-06-25), there has been a preemptive check, before looking at any commits, to see whether the user has a valid name/email combination. This is convenient, because it means that we abort the operation before even beginning (rather than just complaining that we are unable to pick a particular commit). However, it does the wrong thing when the rebase does not actually need to generate any new commits (e.g., a fast-forward with no commits to pick, or one where the base stays the same, and we just pick the same commits without rewriting anything). In this case it may complain about the lack of ident, even though one would not be needed to complete the operation. This may seem like mere nit-picking, but because interactive rebase underlies the "preserve-merges" rebase, somebody who has set "pull.rebase" to "preserve" cannot make even a fast-forward pull without a valid ident, as we bail before even realizing the fast-forward nature. This commit drops the extra ident check entirely. This means we rely on individual commands that generate commit objects to complain. So we will continue to notice and prevent cases that actually do create commits, but with one important difference: we fail while actually executing the "pick" operations, and leave the rebase in a conflicted, half-done state. In some ways this is less convenient, but in some ways it is more so; the user can then manually commit or even "git rebase --continue" after setting up their ident (or providing it as a one-off on the command line). Reported-by: Dakota Hawkins <dakotahawkins@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-29 22:31:35 +00:00
test_when_finished "git rebase --abort || true" &&
git checkout -B tmp side-with-commit &&
test_must_fail git rebase -p master
'
test_expect_success 'author.name overrides user.name' '
test_config user.name user &&
test_config user.email user@example.com &&
test_config author.name author &&
test_commit author-name-override-user &&
echo author user@example.com > expected-author &&
echo user user@example.com > expected-committer &&
git log --format="%an %ae" -1 > actual-author &&
git log --format="%cn %ce" -1 > actual-committer &&
test_cmp expected-author actual-author &&
test_cmp expected-committer actual-committer
'
test_expect_success 'author.email overrides user.email' '
test_config user.name user &&
test_config user.email user@example.com &&
test_config author.email author@example.com &&
test_commit author-email-override-user &&
echo user author@example.com > expected-author &&
echo user user@example.com > expected-committer &&
git log --format="%an %ae" -1 > actual-author &&
git log --format="%cn %ce" -1 > actual-committer &&
test_cmp expected-author actual-author &&
test_cmp expected-committer actual-committer
'
test_expect_success 'committer.name overrides user.name' '
test_config user.name user &&
test_config user.email user@example.com &&
test_config committer.name committer &&
test_commit committer-name-override-user &&
echo user user@example.com > expected-author &&
echo committer user@example.com > expected-committer &&
git log --format="%an %ae" -1 > actual-author &&
git log --format="%cn %ce" -1 > actual-committer &&
test_cmp expected-author actual-author &&
test_cmp expected-committer actual-committer
'
test_expect_success 'committer.email overrides user.email' '
test_config user.name user &&
test_config user.email user@example.com &&
test_config committer.email committer@example.com &&
test_commit committer-email-override-user &&
echo user user@example.com > expected-author &&
echo user committer@example.com > expected-committer &&
git log --format="%an %ae" -1 > actual-author &&
git log --format="%cn %ce" -1 > actual-committer &&
test_cmp expected-author actual-author &&
test_cmp expected-committer actual-committer
'
test_expect_success 'author and committer environment variables override config settings' '
test_config user.name user &&
test_config user.email user@example.com &&
test_config author.name author &&
test_config author.email author@example.com &&
test_config committer.name committer &&
test_config committer.email committer@example.com &&
GIT_AUTHOR_NAME=env_author && export GIT_AUTHOR_NAME &&
GIT_AUTHOR_EMAIL=env_author@example.com && export GIT_AUTHOR_EMAIL &&
GIT_COMMITTER_NAME=env_commit && export GIT_COMMITTER_NAME &&
GIT_COMMITTER_EMAIL=env_commit@example.com && export GIT_COMMITTER_EMAIL &&
test_commit env-override-conf &&
echo env_author env_author@example.com > expected-author &&
echo env_commit env_commit@example.com > expected-committer &&
git log --format="%an %ae" -1 > actual-author &&
git log --format="%cn %ce" -1 > actual-committer &&
sane_unset GIT_AUTHOR_NAME GIT_AUTHOR_EMAIL &&
sane_unset GIT_COMMITTER_NAME GIT_COMMITTER_EMAIL &&
test_cmp expected-author actual-author &&
test_cmp expected-committer actual-committer
'
test_done