git/t/t1507-rev-parse-upstream.sh

258 lines
6.7 KiB
Bash
Raw Normal View History

#!/bin/sh
test_description='test <branch>@{upstream} syntax'
. ./test-lib.sh
test_expect_success 'setup' '
test_commit 1 &&
git checkout -b side &&
test_commit 2 &&
git checkout master &&
git clone . clone &&
test_commit 3 &&
(cd clone &&
test_commit 4 &&
git branch --track my-side origin/side &&
git branch --track local-master master &&
git branch --track fun@ny origin/side &&
git branch --track @funny origin/side &&
git branch --track funny@ origin/side &&
git remote add -t master master-only .. &&
git fetch master-only &&
git branch bad-upstream &&
git config branch.bad-upstream.remote master-only &&
git config branch.bad-upstream.merge refs/heads/side
)
'
sq="'"
full_name () {
(cd clone &&
git rev-parse --symbolic-full-name "$@")
}
commit_subject () {
(cd clone &&
git show -s --pretty=format:%s "$@")
}
error_message () {
(cd clone &&
test_must_fail git rev-parse --verify "$@" 2>../error)
}
test_expect_success '@{upstream} resolves to correct full name' '
rev-parse: match @{upstream}, @{u} and @{push} case-insensitively Change the revision parsing logic to match @{upstream}, @{u} & @{push} case-insensitively. Before this change supplying anything except the lower-case forms emits an "unknown revision or path not in the working tree" error. This change makes upper-case & mixed-case versions equivalent to the lower-case versions. The use-case for this is being able to hold the shift key down while typing @{u} on certain keyboard layouts, which makes the sequence easier to type, and reduces cases where git throws an error at the user where it could do what he means instead. These suffixes now join various other suffixes & special syntax documented in gitrevisions(7) that matches case-insensitively. A table showing the status of the various forms documented there before & after this patch is shown below. The key for the table is: - CI = Case Insensitive - CIP = Case Insensitive Possible (without ambiguities) - AG = Accepts Garbage (.e.g. @{./.4.minutes./.}) Before this change: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | N | Y | N | | @{push} | N | Y | N | |----------------+-----+------+-----| After it: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | Y | Y | N | | @{push} | Y | Y | N | |----------------+-----+------+-----| The ^{<type>} suffix is not made case-insensitive, because other places that take <type> like "cat-file -t <type>" do want them case sensitively (after all we never declared that type names are case insensitive). Allowing case-insensitive typename only with this syntax will make the resulting Git as a whole inconsistent. This change was independently authored to scratch a longtime itch, but when I was about to submit it I discovered that a similar patch had been submitted unsuccessfully before by Conrad Irwin in August 2011 as "rev-parse: Allow @{U} as a synonym for @{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>). The tests for this patch are more exhaustive than in the 2011 submission. The starting point for them was to first change the code to only support upper-case versions of the existing words, seeing what broke, and amending the breaking tests to check upper case & mixed case as appropriate, and where not redundant to other similar tests. The implementation itself is equivalent. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-27 11:16:55 +00:00
test refs/remotes/origin/master = "$(full_name @{upstream})" &&
test refs/remotes/origin/master = "$(full_name @{UPSTREAM})" &&
test refs/remotes/origin/master = "$(full_name @{UpSTReam})"
'
test_expect_success '@{u} resolves to correct full name' '
rev-parse: match @{upstream}, @{u} and @{push} case-insensitively Change the revision parsing logic to match @{upstream}, @{u} & @{push} case-insensitively. Before this change supplying anything except the lower-case forms emits an "unknown revision or path not in the working tree" error. This change makes upper-case & mixed-case versions equivalent to the lower-case versions. The use-case for this is being able to hold the shift key down while typing @{u} on certain keyboard layouts, which makes the sequence easier to type, and reduces cases where git throws an error at the user where it could do what he means instead. These suffixes now join various other suffixes & special syntax documented in gitrevisions(7) that matches case-insensitively. A table showing the status of the various forms documented there before & after this patch is shown below. The key for the table is: - CI = Case Insensitive - CIP = Case Insensitive Possible (without ambiguities) - AG = Accepts Garbage (.e.g. @{./.4.minutes./.}) Before this change: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | N | Y | N | | @{push} | N | Y | N | |----------------+-----+------+-----| After it: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | Y | Y | N | | @{push} | Y | Y | N | |----------------+-----+------+-----| The ^{<type>} suffix is not made case-insensitive, because other places that take <type> like "cat-file -t <type>" do want them case sensitively (after all we never declared that type names are case insensitive). Allowing case-insensitive typename only with this syntax will make the resulting Git as a whole inconsistent. This change was independently authored to scratch a longtime itch, but when I was about to submit it I discovered that a similar patch had been submitted unsuccessfully before by Conrad Irwin in August 2011 as "rev-parse: Allow @{U} as a synonym for @{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>). The tests for this patch are more exhaustive than in the 2011 submission. The starting point for them was to first change the code to only support upper-case versions of the existing words, seeing what broke, and amending the breaking tests to check upper case & mixed case as appropriate, and where not redundant to other similar tests. The implementation itself is equivalent. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-27 11:16:55 +00:00
test refs/remotes/origin/master = "$(full_name @{u})" &&
test refs/remotes/origin/master = "$(full_name @{U})"
'
test_expect_success 'my-side@{upstream} resolves to correct full name' '
test refs/remotes/origin/side = "$(full_name my-side@{u})"
'
test_expect_success 'upstream of branch with @ in middle' '
full_name fun@ny@{u} >actual &&
echo refs/remotes/origin/side >expect &&
rev-parse: match @{upstream}, @{u} and @{push} case-insensitively Change the revision parsing logic to match @{upstream}, @{u} & @{push} case-insensitively. Before this change supplying anything except the lower-case forms emits an "unknown revision or path not in the working tree" error. This change makes upper-case & mixed-case versions equivalent to the lower-case versions. The use-case for this is being able to hold the shift key down while typing @{u} on certain keyboard layouts, which makes the sequence easier to type, and reduces cases where git throws an error at the user where it could do what he means instead. These suffixes now join various other suffixes & special syntax documented in gitrevisions(7) that matches case-insensitively. A table showing the status of the various forms documented there before & after this patch is shown below. The key for the table is: - CI = Case Insensitive - CIP = Case Insensitive Possible (without ambiguities) - AG = Accepts Garbage (.e.g. @{./.4.minutes./.}) Before this change: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | N | Y | N | | @{push} | N | Y | N | |----------------+-----+------+-----| After it: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | Y | Y | N | | @{push} | Y | Y | N | |----------------+-----+------+-----| The ^{<type>} suffix is not made case-insensitive, because other places that take <type> like "cat-file -t <type>" do want them case sensitively (after all we never declared that type names are case insensitive). Allowing case-insensitive typename only with this syntax will make the resulting Git as a whole inconsistent. This change was independently authored to scratch a longtime itch, but when I was about to submit it I discovered that a similar patch had been submitted unsuccessfully before by Conrad Irwin in August 2011 as "rev-parse: Allow @{U} as a synonym for @{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>). The tests for this patch are more exhaustive than in the 2011 submission. The starting point for them was to first change the code to only support upper-case versions of the existing words, seeing what broke, and amending the breaking tests to check upper case & mixed case as appropriate, and where not redundant to other similar tests. The implementation itself is equivalent. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-27 11:16:55 +00:00
test_cmp expect actual &&
full_name fun@ny@{U} >actual &&
test_cmp expect actual
'
test_expect_success 'upstream of branch with @ at start' '
full_name @funny@{u} >actual &&
echo refs/remotes/origin/side >expect &&
test_cmp expect actual
'
test_expect_success 'upstream of branch with @ at end' '
full_name funny@@{u} >actual &&
echo refs/remotes/origin/side >expect &&
test_cmp expect actual
'
test_expect_success 'refs/heads/my-side@{upstream} does not resolve to my-side{upstream}' '
test_must_fail full_name refs/heads/my-side@{upstream}
'
test_expect_success 'my-side@{u} resolves to correct commit' '
git checkout side &&
test_commit 5 &&
(cd clone && git fetch) &&
test 2 = "$(commit_subject my-side)" &&
test 5 = "$(commit_subject my-side@{u})"
'
test_expect_success 'not-tracking@{u} fails' '
test_must_fail full_name non-tracking@{u} &&
(cd clone && git checkout --no-track -b non-tracking) &&
test_must_fail full_name non-tracking@{u}
'
test_expect_success '<branch>@{u}@{1} resolves correctly' '
test_commit 6 &&
(cd clone && git fetch) &&
rev-parse: match @{upstream}, @{u} and @{push} case-insensitively Change the revision parsing logic to match @{upstream}, @{u} & @{push} case-insensitively. Before this change supplying anything except the lower-case forms emits an "unknown revision or path not in the working tree" error. This change makes upper-case & mixed-case versions equivalent to the lower-case versions. The use-case for this is being able to hold the shift key down while typing @{u} on certain keyboard layouts, which makes the sequence easier to type, and reduces cases where git throws an error at the user where it could do what he means instead. These suffixes now join various other suffixes & special syntax documented in gitrevisions(7) that matches case-insensitively. A table showing the status of the various forms documented there before & after this patch is shown below. The key for the table is: - CI = Case Insensitive - CIP = Case Insensitive Possible (without ambiguities) - AG = Accepts Garbage (.e.g. @{./.4.minutes./.}) Before this change: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | N | Y | N | | @{push} | N | Y | N | |----------------+-----+------+-----| After it: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | Y | Y | N | | @{push} | Y | Y | N | |----------------+-----+------+-----| The ^{<type>} suffix is not made case-insensitive, because other places that take <type> like "cat-file -t <type>" do want them case sensitively (after all we never declared that type names are case insensitive). Allowing case-insensitive typename only with this syntax will make the resulting Git as a whole inconsistent. This change was independently authored to scratch a longtime itch, but when I was about to submit it I discovered that a similar patch had been submitted unsuccessfully before by Conrad Irwin in August 2011 as "rev-parse: Allow @{U} as a synonym for @{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>). The tests for this patch are more exhaustive than in the 2011 submission. The starting point for them was to first change the code to only support upper-case versions of the existing words, seeing what broke, and amending the breaking tests to check upper case & mixed case as appropriate, and where not redundant to other similar tests. The implementation itself is equivalent. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-27 11:16:55 +00:00
test 5 = $(commit_subject my-side@{u}@{1}) &&
test 5 = $(commit_subject my-side@{U}@{1})
'
test_expect_success '@{u} without specifying branch fails on a detached HEAD' '
git checkout HEAD^0 &&
rev-parse: match @{upstream}, @{u} and @{push} case-insensitively Change the revision parsing logic to match @{upstream}, @{u} & @{push} case-insensitively. Before this change supplying anything except the lower-case forms emits an "unknown revision or path not in the working tree" error. This change makes upper-case & mixed-case versions equivalent to the lower-case versions. The use-case for this is being able to hold the shift key down while typing @{u} on certain keyboard layouts, which makes the sequence easier to type, and reduces cases where git throws an error at the user where it could do what he means instead. These suffixes now join various other suffixes & special syntax documented in gitrevisions(7) that matches case-insensitively. A table showing the status of the various forms documented there before & after this patch is shown below. The key for the table is: - CI = Case Insensitive - CIP = Case Insensitive Possible (without ambiguities) - AG = Accepts Garbage (.e.g. @{./.4.minutes./.}) Before this change: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | N | Y | N | | @{push} | N | Y | N | |----------------+-----+------+-----| After it: |----------------+-----+------+-----| | What? | CI? | CIP? | AG? | |----------------+-----+------+-----| | @{<date>} | Y | Y | Y | | @{upstream} | Y | Y | N | | @{push} | Y | Y | N | |----------------+-----+------+-----| The ^{<type>} suffix is not made case-insensitive, because other places that take <type> like "cat-file -t <type>" do want them case sensitively (after all we never declared that type names are case insensitive). Allowing case-insensitive typename only with this syntax will make the resulting Git as a whole inconsistent. This change was independently authored to scratch a longtime itch, but when I was about to submit it I discovered that a similar patch had been submitted unsuccessfully before by Conrad Irwin in August 2011 as "rev-parse: Allow @{U} as a synonym for @{u}" (<1313287071-7851-1-git-send-email-conrad.irwin@gmail.com>). The tests for this patch are more exhaustive than in the 2011 submission. The starting point for them was to first change the code to only support upper-case versions of the existing words, seeing what broke, and amending the breaking tests to check upper case & mixed case as appropriate, and where not redundant to other similar tests. The implementation itself is equivalent. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-03-27 11:16:55 +00:00
test_must_fail git rev-parse @{u} &&
test_must_fail git rev-parse @{U}
'
test_expect_success 'checkout -b new my-side@{u} forks from the same' '
(
cd clone &&
git checkout -b new my-side@{u} &&
git rev-parse --symbolic-full-name my-side@{u} >expect &&
git rev-parse --symbolic-full-name new@{u} >actual &&
test_cmp expect actual
)
'
Teach @{upstream} syntax to strbuf_branchanme() This teaches @{upstream} syntax to interpret_branch_name(), instead of dwim_ref() machinery. There are places in git UI that behaves differently when you give a local branch name and when you give an extended SHA-1 expression that evaluates to the commit object name at the tip of the branch. The intent is that the special syntax such as @{-1} can stand in as if the user spelled the name of the branch in such places. The name of the branch "frotz" to switch to ("git checkout frotz"), and the name of the branch "nitfol" to fork a new branch "frotz" from ("git checkout -b frotz nitfol"), are examples of such places. These places take only the name of the branch (e.g. "frotz"), and they are supposed to act differently to an equivalent refname (e.g. "refs/heads/frotz"), so hooking the @{upstream} and @{-N} syntax to dwim_ref() is insufficient when we want to deal with cases a local branch is forked from another local branch and use "forked@{upstream}" to name the forkee branch. The "upstream" syntax "forked@{u}" is to specify the ref that "forked" is configured to merge with, and most often the forkee is a remote tracking branch, not a local branch. We cannot simply return a local branch name, but that does not necessarily mean we have to returns the full refname (e.g. refs/remotes/origin/frotz, when returning origin/frotz is enough). This update calls shorten_unambiguous_ref() to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20 07:17:11 +00:00
test_expect_success 'merge my-side@{u} records the correct name' '
(
cd clone &&
git checkout master &&
test_might_fail git branch -D new &&
git branch -t new my-side@{u} &&
git merge -s ours new@{u} &&
git-show: fix 'git show -s' to not add extra terminator after merge commit When git show -s is called for merge commit it prints extra newline after any merge commit. This differs from output for commits with one parent. Fix it by more thorough checking that diff output is disabled. The code in question exists since commit 3969cf7db1. The additional newline is really needed for cases when patch is requested, test t4013-diff-various.sh contains cases which can demonstrate behavior when the condition is restricted further. Tests: Added merge commit to 'set up a bit of history' case in t7007-show.sh to cover the fix. Existing tests are updated to demonstrate the new behaviour. Earlier, the tests that used "git show -s --pretty=format:%s", even though "--pretty=format:%s" calls for item separator semantics and does not ask for the terminating newline after the last item, expected the output to end with such a newline. They were relying on the buggy behaviour. Use of "--format=%s", which is equivalent to "--pretty=tformat:%s" that asks for a terminating newline after each item, is a more realistic way to use the command. In the test 'merge log messages' the expected data is changed, because it was explicitly listing the extra newline. Also the msg.nologff and msg.nolognoff expected files are replaced by one msg.nolog, because they were diffing because of the bug, and now there should be no difference. Signed-off-by: Max Kirillov <max@max630.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-05-14 22:12:45 +00:00
git show -s --pretty=tformat:%s >actual &&
echo "Merge remote-tracking branch ${sq}origin/side${sq}" >expect &&
test_cmp expect actual
)
'
Teach @{upstream} syntax to strbuf_branchanme() This teaches @{upstream} syntax to interpret_branch_name(), instead of dwim_ref() machinery. There are places in git UI that behaves differently when you give a local branch name and when you give an extended SHA-1 expression that evaluates to the commit object name at the tip of the branch. The intent is that the special syntax such as @{-1} can stand in as if the user spelled the name of the branch in such places. The name of the branch "frotz" to switch to ("git checkout frotz"), and the name of the branch "nitfol" to fork a new branch "frotz" from ("git checkout -b frotz nitfol"), are examples of such places. These places take only the name of the branch (e.g. "frotz"), and they are supposed to act differently to an equivalent refname (e.g. "refs/heads/frotz"), so hooking the @{upstream} and @{-N} syntax to dwim_ref() is insufficient when we want to deal with cases a local branch is forked from another local branch and use "forked@{upstream}" to name the forkee branch. The "upstream" syntax "forked@{u}" is to specify the ref that "forked" is configured to merge with, and most often the forkee is a remote tracking branch, not a local branch. We cannot simply return a local branch name, but that does not necessarily mean we have to returns the full refname (e.g. refs/remotes/origin/frotz, when returning origin/frotz is enough). This update calls shorten_unambiguous_ref() to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20 07:17:11 +00:00
test_expect_success 'branch -d other@{u}' '
git checkout -t -b other master &&
git branch -d @{u} &&
git for-each-ref refs/heads/master >actual &&
test_must_be_empty actual
'
Teach @{upstream} syntax to strbuf_branchanme() This teaches @{upstream} syntax to interpret_branch_name(), instead of dwim_ref() machinery. There are places in git UI that behaves differently when you give a local branch name and when you give an extended SHA-1 expression that evaluates to the commit object name at the tip of the branch. The intent is that the special syntax such as @{-1} can stand in as if the user spelled the name of the branch in such places. The name of the branch "frotz" to switch to ("git checkout frotz"), and the name of the branch "nitfol" to fork a new branch "frotz" from ("git checkout -b frotz nitfol"), are examples of such places. These places take only the name of the branch (e.g. "frotz"), and they are supposed to act differently to an equivalent refname (e.g. "refs/heads/frotz"), so hooking the @{upstream} and @{-N} syntax to dwim_ref() is insufficient when we want to deal with cases a local branch is forked from another local branch and use "forked@{upstream}" to name the forkee branch. The "upstream" syntax "forked@{u}" is to specify the ref that "forked" is configured to merge with, and most often the forkee is a remote tracking branch, not a local branch. We cannot simply return a local branch name, but that does not necessarily mean we have to returns the full refname (e.g. refs/remotes/origin/frotz, when returning origin/frotz is enough). This update calls shorten_unambiguous_ref() to do so. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-20 07:17:11 +00:00
test_expect_success 'checkout other@{u}' '
git branch -f master HEAD &&
git checkout -t -b another master &&
git checkout @{u} &&
git symbolic-ref HEAD >actual &&
echo refs/heads/master >expect &&
test_cmp expect actual
'
test_expect_success 'branch@{u} works when tracking a local branch' '
test refs/heads/master = "$(full_name local-master@{u})"
'
test_expect_success 'branch@{u} error message when no upstream' '
cat >expect <<-EOF &&
fatal: no upstream configured for branch ${sq}non-tracking${sq}
EOF
error_message non-tracking@{u} &&
test_i18ncmp expect error
'
test_expect_success '@{u} error message when no upstream' '
cat >expect <<-EOF &&
fatal: no upstream configured for branch ${sq}master${sq}
EOF
test_must_fail git rev-parse --verify @{u} 2>actual &&
test_i18ncmp expect actual
'
test_expect_success 'branch@{u} error message with misspelt branch' '
cat >expect <<-EOF &&
fatal: no such branch: ${sq}no-such-branch${sq}
EOF
error_message no-such-branch@{u} &&
test_i18ncmp expect error
'
test_expect_success '@{u} error message when not on a branch' '
cat >expect <<-EOF &&
fatal: HEAD does not point to a branch
EOF
git checkout HEAD^0 &&
test_must_fail git rev-parse --verify @{u} 2>actual &&
test_i18ncmp expect actual
'
test_expect_success 'branch@{u} error message if upstream branch not fetched' '
cat >expect <<-EOF &&
fatal: upstream branch ${sq}refs/heads/side${sq} not stored as a remote-tracking branch
EOF
error_message bad-upstream@{u} &&
test_i18ncmp expect error
'
test_expect_success 'pull works when tracking a local branch' '
(
cd clone &&
git checkout local-master &&
git pull
)
'
# makes sense if the previous one succeeded
test_expect_success '@{u} works when tracking a local branch' '
test refs/heads/master = "$(full_name @{u})"
'
commit=$(git rev-parse HEAD)
cat >expect <<EOF
commit $commit
Reflog: master@{0} (C O Mitter <committer@example.com>)
Reflog message: branch: Created from HEAD
Author: A U Thor <author@example.com>
Date: Thu Apr 7 15:15:13 2005 -0700
3
EOF
test_expect_success 'log -g other@{u}' '
git log -1 -g other@{u} >actual &&
test_cmp expect actual
'
cat >expect <<EOF
commit $commit
Reflog: master@{Thu Apr 7 15:17:13 2005 -0700} (C O Mitter <committer@example.com>)
Reflog message: branch: Created from HEAD
Author: A U Thor <author@example.com>
Date: Thu Apr 7 15:15:13 2005 -0700
3
EOF
test_expect_success 'log -g other@{u}@{now}' '
git log -1 -g other@{u}@{now} >actual &&
test_cmp expect actual
'
interpret_branch_name: avoid @{upstream} past colon get_sha1() cannot currently parse a valid object name like "HEAD:@{upstream}" (assuming that such an oddly named file exists in the HEAD commit). It takes two passes to parse the string: 1. It first considers the whole thing as a ref, which results in looking for the upstream of "HEAD:". 2. It finds the colon, parses "HEAD" as a tree-ish, and then finds the path "@{upstream}" in the tree. For a path that looks like a normal reflog (e.g., "HEAD:@{yesterday}"), the first pass is a no-op. We try to dwim_ref("HEAD:"), that returns zero refs, and we proceed with colon-parsing. For "HEAD:@{upstream}", though, the first pass ends up in interpret_upstream_mark, which tries to find the branch "HEAD:". When it sees that the branch does not exist, it actually dies rather than returning an error to the caller. As a result, we never make it to the second pass. One obvious way of fixing this would be to teach interpret_upstream_mark to simply report "no, this isn't an upstream" in such a case. However, that would make the error-reporting for legitimate upstream cases significantly worse. Something like "bogus@{upstream}" would simply report "unknown revision: bogus@{upstream}", while the current code diagnoses a wide variety of possible misconfigurations (no such branch, branch exists but does not have upstream, etc). However, we can take advantage of the fact that a branch name cannot contain a colon. Therefore even if we find an upstream mark, any prefix with a colon must mean that the upstream mark we found is actually a pathname, and should be disregarded completely. This patch implements that logic. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-15 08:37:23 +00:00
test_expect_success '@{reflog}-parsing does not look beyond colon' '
echo content >@{yesterday} &&
git add @{yesterday} &&
git commit -m "funny reflog file" &&
git hash-object @{yesterday} >expect &&
git rev-parse HEAD:@{yesterday} >actual
'
test_expect_success '@{upstream}-parsing does not look beyond colon' '
echo content >@{upstream} &&
git add @{upstream} &&
git commit -m "funny upstream file" &&
git hash-object @{upstream} >expect &&
git rev-parse HEAD:@{upstream} >actual
'
test_done