2021-08-31 20:52:31 +00:00
|
|
|
#!/bin/sh
|
|
|
|
|
|
|
|
|
|
test_description='exercise basic multi-pack bitmap functionality'
|
|
|
|
|
. ./test-lib.sh
|
|
|
|
|
. "${TEST_DIRECTORY}/lib-bitmap.sh"
|
|
|
|
|
|
|
|
|
|
# We'll be writing our own midx and bitmaps, so avoid getting confused by the
|
|
|
|
|
# automatic ones.
|
|
|
|
|
GIT_TEST_MULTI_PACK_INDEX=0
|
|
|
|
|
GIT_TEST_MULTI_PACK_INDEX_WRITE_BITMAP=0
|
|
|
|
|
|
midx: read `RIDX` chunk when present
When a MIDX contains the new `RIDX` chunk, ensure that the reverse index
is read from it instead of the on-disk .rev file. Since we need to
encode the object order in the MIDX itself for correctness reasons,
there is no point in storing the same data again outside of the MIDX.
So, this patch stops writing separate .rev files, and reads it out of
the MIDX itself. This is possible to do with relatively little new code,
since the format of the RIDX chunk is identical to the data in the .rev
file. In other words, we can implement this by pointing the
`revindex_data` field at the reverse index chunk of the MIDX instead of
the .rev file without any other changes.
Note that we have two knobs that are adjusted for the new tests:
GIT_TEST_MIDX_WRITE_REV and GIT_TEST_MIDX_READ_RIDX. The former controls
whether the MIDX .rev is written at all, and the latter controls whether
we read the MIDX's RIDX chunk.
Both are necessary to ensure that the test added at the beginning of
this series continues to work. This is because we always need to write
the RIDX chunk in the MIDX in order to change its checksum, but we want
to make sure reading the existing .rev file still works (since the RIDX
chunk takes precedence by default).
Arguably this isn't a very interesting mode to test, because the
precedence rules mean that we'll always read the RIDX chunk over the
.rev file. But it makes it impossible for a user to induce corruption in
their repository by adjusting the test knobs (since if we had an
either/or knob they could stop writing the RIDX chunk, allowing them to
tweak the MIDX's object order without changing its checksum).
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:17 +00:00
|
|
|
# This test exercise multi-pack bitmap functionality where the object order is
|
|
|
|
|
# stored and read from a special chunk within the MIDX, so use the default
|
|
|
|
|
# behavior here.
|
|
|
|
|
sane_unset GIT_TEST_MIDX_WRITE_REV
|
|
|
|
|
sane_unset GIT_TEST_MIDX_READ_RIDX
|
|
|
|
|
|
2021-08-31 20:52:31 +00:00
|
|
|
bitmap_reuse_tests() {
|
|
|
|
|
from=$1
|
|
|
|
|
to=$2
|
2022-08-14 16:55:09 +00:00
|
|
|
writeLookupTable=false
|
|
|
|
|
|
|
|
|
|
for i in $3-${$#}
|
|
|
|
|
do
|
|
|
|
|
case $i in
|
|
|
|
|
"pack.writeBitmapLookupTable") writeLookupTable=true;;
|
|
|
|
|
esac
|
|
|
|
|
done
|
2021-08-31 20:52:31 +00:00
|
|
|
|
|
|
|
|
test_expect_success "setup pack reuse tests ($from -> $to)" '
|
|
|
|
|
rm -fr repo &&
|
|
|
|
|
git init repo &&
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
2022-08-14 16:55:09 +00:00
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
2021-08-31 20:52:31 +00:00
|
|
|
test_commit_bulk 16 &&
|
|
|
|
|
git tag old-tip &&
|
|
|
|
|
|
|
|
|
|
git config core.multiPackIndex true &&
|
|
|
|
|
if test "MIDX" = "$from"
|
|
|
|
|
then
|
|
|
|
|
git repack -Ad &&
|
|
|
|
|
git multi-pack-index write --bitmap
|
|
|
|
|
else
|
|
|
|
|
git repack -Adb
|
|
|
|
|
fi
|
|
|
|
|
)
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
test_expect_success "build bitmap from existing ($from -> $to)" '
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
2022-08-14 16:55:09 +00:00
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
2021-08-31 20:52:31 +00:00
|
|
|
test_commit_bulk --id=further 16 &&
|
|
|
|
|
git tag new-tip &&
|
|
|
|
|
|
|
|
|
|
if test "MIDX" = "$to"
|
|
|
|
|
then
|
|
|
|
|
git repack -d &&
|
|
|
|
|
git multi-pack-index write --bitmap
|
|
|
|
|
else
|
|
|
|
|
git repack -Adb
|
|
|
|
|
fi
|
|
|
|
|
)
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
test_expect_success "verify resulting bitmaps ($from -> $to)" '
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
2022-08-14 16:55:09 +00:00
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
2021-08-31 20:52:31 +00:00
|
|
|
git for-each-ref &&
|
|
|
|
|
git rev-list --test-bitmap refs/tags/old-tip &&
|
|
|
|
|
git rev-list --test-bitmap refs/tags/new-tip
|
|
|
|
|
)
|
|
|
|
|
'
|
|
|
|
|
}
|
|
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_midx_bitmap_cases () {
|
|
|
|
|
writeLookupTable=false
|
|
|
|
|
writeBitmapLookupTable=
|
|
|
|
|
|
|
|
|
|
for i in "$@"
|
|
|
|
|
do
|
|
|
|
|
case $i in
|
|
|
|
|
"pack.writeBitmapLookupTable")
|
|
|
|
|
writeLookupTable=true
|
|
|
|
|
writeBitmapLookupTable="$i"
|
|
|
|
|
;;
|
|
|
|
|
esac
|
|
|
|
|
done
|
|
|
|
|
|
|
|
|
|
test_expect_success 'setup test_repository' '
|
|
|
|
|
rm -rf * .git &&
|
|
|
|
|
git init &&
|
|
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"'
|
|
|
|
|
'
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
midx_bitmap_core
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
bitmap_reuse_tests 'pack' 'MIDX' "$writeBitmapLookupTable"
|
|
|
|
|
bitmap_reuse_tests 'MIDX' 'pack' "$writeBitmapLookupTable"
|
|
|
|
|
bitmap_reuse_tests 'MIDX' 'MIDX' "$writeBitmapLookupTable"
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_expect_success 'missing object closure fails gracefully' '
|
|
|
|
|
rm -fr repo &&
|
|
|
|
|
git init repo &&
|
|
|
|
|
test_when_finished "rm -fr repo" &&
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
|
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_commit loose &&
|
|
|
|
|
test_commit packed &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
# Do not pass "--revs"; we want a pack without the "loose"
|
|
|
|
|
# commit.
|
|
|
|
|
git pack-objects $objdir/pack/pack <<-EOF &&
|
|
|
|
|
$(git rev-parse packed)
|
|
|
|
|
EOF
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_must_fail git multi-pack-index write --bitmap 2>err &&
|
|
|
|
|
grep "doesn.t have full closure" err &&
|
|
|
|
|
test_path_is_missing $midx
|
|
|
|
|
)
|
|
|
|
|
'
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
midx_bitmap_partial_tests
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_expect_success 'removing a MIDX clears stale bitmaps' '
|
|
|
|
|
rm -fr repo &&
|
|
|
|
|
git init repo &&
|
|
|
|
|
test_when_finished "rm -fr repo" &&
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
|
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
|
|
|
|
test_commit base &&
|
|
|
|
|
git repack &&
|
|
|
|
|
git multi-pack-index write --bitmap &&
|
|
|
|
|
|
|
|
|
|
# Write a MIDX and bitmap; remove the MIDX but leave the bitmap.
|
|
|
|
|
stale_bitmap=$midx-$(midx_checksum $objdir).bitmap &&
|
|
|
|
|
rm $midx &&
|
|
|
|
|
|
|
|
|
|
# Then write a new MIDX.
|
|
|
|
|
test_commit new &&
|
|
|
|
|
git repack &&
|
|
|
|
|
git multi-pack-index write --bitmap &&
|
|
|
|
|
|
|
|
|
|
test_path_is_file $midx &&
|
|
|
|
|
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
|
|
|
|
|
test_path_is_missing $stale_bitmap
|
|
|
|
|
)
|
|
|
|
|
'
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_expect_success 'pack.preferBitmapTips' '
|
|
|
|
|
git init repo &&
|
|
|
|
|
test_when_finished "rm -fr repo" &&
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
|
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_commit_bulk --message="%s" 103 &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git log --format="%H" >commits.raw &&
|
|
|
|
|
sort <commits.raw >commits &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git log --format="create refs/tags/%s %H" HEAD >refs &&
|
|
|
|
|
git update-ref --stdin <refs &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git multi-pack-index write --bitmap &&
|
|
|
|
|
test_path_is_file $midx &&
|
|
|
|
|
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test-tool bitmap list-commits | sort >bitmaps &&
|
|
|
|
|
comm -13 bitmaps commits >before &&
|
|
|
|
|
test_line_count = 1 before &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
perl -ne "printf(\"create refs/tags/include/%d \", $.); print" \
|
|
|
|
|
<before | git update-ref --stdin &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
rm -fr $midx-$(midx_checksum $objdir).bitmap &&
|
|
|
|
|
rm -fr $midx &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git -c pack.preferBitmapTips=refs/tags/include \
|
|
|
|
|
multi-pack-index write --bitmap &&
|
|
|
|
|
test-tool bitmap list-commits | sort >bitmaps &&
|
|
|
|
|
comm -13 bitmaps commits >after &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
! test_cmp before after
|
|
|
|
|
)
|
|
|
|
|
'
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_expect_success 'writing a bitmap with --refs-snapshot' '
|
|
|
|
|
git init repo &&
|
|
|
|
|
test_when_finished "rm -fr repo" &&
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
|
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
2021-08-31 20:52:31 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_commit one &&
|
|
|
|
|
test_commit two &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git rev-parse one >snapshot &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git repack -ad &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
# First, write a MIDX which see both refs/tags/one and
|
|
|
|
|
# refs/tags/two (causing both of those commits to receive
|
|
|
|
|
# bitmaps).
|
|
|
|
|
git multi-pack-index write --bitmap &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_path_is_file $midx &&
|
|
|
|
|
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test-tool bitmap list-commits | sort >bitmaps &&
|
|
|
|
|
grep "$(git rev-parse one)" bitmaps &&
|
|
|
|
|
grep "$(git rev-parse two)" bitmaps &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
rm -fr $midx-$(midx_checksum $objdir).bitmap &&
|
|
|
|
|
rm -fr $midx &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
# Then again, but with a refs snapshot which only sees
|
|
|
|
|
# refs/tags/one.
|
|
|
|
|
git multi-pack-index write --bitmap --refs-snapshot=snapshot &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_path_is_file $midx &&
|
|
|
|
|
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test-tool bitmap list-commits | sort >bitmaps &&
|
|
|
|
|
grep "$(git rev-parse one)" bitmaps &&
|
|
|
|
|
! grep "$(git rev-parse two)" bitmaps
|
|
|
|
|
)
|
|
|
|
|
'
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_expect_success 'write a bitmap with --refs-snapshot (preferred tips)' '
|
|
|
|
|
git init repo &&
|
|
|
|
|
test_when_finished "rm -fr repo" &&
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
|
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_commit_bulk --message="%s" 103 &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git log --format="%H" >commits.raw &&
|
|
|
|
|
sort <commits.raw >commits &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git log --format="create refs/tags/%s %H" HEAD >refs &&
|
|
|
|
|
git update-ref --stdin <refs &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git multi-pack-index write --bitmap &&
|
|
|
|
|
test_path_is_file $midx &&
|
|
|
|
|
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test-tool bitmap list-commits | sort >bitmaps &&
|
|
|
|
|
comm -13 bitmaps commits >before &&
|
|
|
|
|
test_line_count = 1 before &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
(
|
|
|
|
|
grep -vf before commits.raw &&
|
|
|
|
|
# mark missing commits as preferred
|
|
|
|
|
sed "s/^/+/" before
|
|
|
|
|
) >snapshot &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
rm -fr $midx-$(midx_checksum $objdir).bitmap &&
|
|
|
|
|
rm -fr $midx &&
|
|
|
|
|
|
|
|
|
|
git multi-pack-index write --bitmap --refs-snapshot=snapshot &&
|
|
|
|
|
test-tool bitmap list-commits | sort >bitmaps &&
|
|
|
|
|
comm -13 bitmaps commits >after &&
|
|
|
|
|
|
|
|
|
|
! test_cmp before after
|
|
|
|
|
)
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
test_expect_success 'hash-cache values are propagated from pack bitmaps' '
|
|
|
|
|
rm -fr repo &&
|
|
|
|
|
git init repo &&
|
|
|
|
|
test_when_finished "rm -fr repo" &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
(
|
2022-08-14 16:55:09 +00:00
|
|
|
cd repo &&
|
|
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_commit base &&
|
|
|
|
|
test_commit base2 &&
|
|
|
|
|
git repack -adb &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test-tool bitmap dump-hashes >pack.raw &&
|
|
|
|
|
test_file_not_empty pack.raw &&
|
|
|
|
|
sort pack.raw >pack.hashes &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_commit new &&
|
|
|
|
|
git repack &&
|
|
|
|
|
git multi-pack-index write --bitmap &&
|
midx: preliminary support for `--refs-snapshot`
To figure out which commits we can write a bitmap for, the multi-pack
index/bitmap code does a reachability traversal, marking any commit
which can be found in the MIDX as eligible to receive a bitmap.
This approach will cause a problem when multi-pack bitmaps are able to
be generated from `git repack`, since the reference tips can change
during the repack. Even though we ignore commits that don't exist in
the MIDX (when doing a scan of the ref tips), it's possible that a
commit in the MIDX reaches something that isn't.
This can happen when a multi-pack index contains some pack which refers
to loose objects (e.g., if a pack was pushed after starting the repack
but before generating the MIDX which depends on an object which is
stored as loose in the repository, and by definition isn't included in
the multi-pack index).
By taking a snapshot of the references before we start repacking, we can
close that race window. In the above scenario (where we have a packed
object pointing at a loose one), we'll either (a) take a snapshot of the
references before seeing the packed one, or (b) take it after, at which
point we can guarantee that the loose object will be packed and included
in the MIDX.
This patch does just that. It writes a temporary "reference snapshot",
which is a list of OIDs that are at the ref tips before writing a
multi-pack bitmap. References that are "preferred" (i.e,. are a suffix
of at least one value of the 'pack.preferBitmapTips' configuration) are
marked with a special '+'.
The format is simple: one line per commit at each tip, with an optional
'+' at the beginning (for preferred references, as described above).
When provided, the reference snapshot is used to drive bitmap selection
instead of the MIDX code doing its own traversal. When it isn't
provided, the usual traversal takes place instead.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-29 01:55:07 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test-tool bitmap dump-hashes >midx.raw &&
|
|
|
|
|
sort midx.raw >midx.hashes &&
|
2021-09-17 21:21:29 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
# ensure that every namehash in the pack bitmap can be found in
|
|
|
|
|
# the midx bitmap (i.e., that there are no oid-namehash pairs
|
|
|
|
|
# unique to the pack bitmap).
|
|
|
|
|
comm -23 pack.hashes midx.hashes >dropped.hashes &&
|
|
|
|
|
test_must_be_empty dropped.hashes
|
|
|
|
|
)
|
|
|
|
|
'
|
2021-09-17 21:21:29 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_expect_success 'no .bitmap is written without any objects' '
|
|
|
|
|
rm -fr repo &&
|
|
|
|
|
git init repo &&
|
|
|
|
|
test_when_finished "rm -fr repo" &&
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
|
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
2021-09-17 21:21:29 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
empty="$(git pack-objects $objdir/pack/pack </dev/null)" &&
|
|
|
|
|
cat >packs <<-EOF &&
|
|
|
|
|
pack-$empty.idx
|
|
|
|
|
EOF
|
2021-09-17 21:21:29 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
git multi-pack-index write --bitmap --stdin-packs \
|
|
|
|
|
<packs 2>err &&
|
2021-09-17 21:21:29 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
grep "bitmap without any objects" err &&
|
2021-09-17 21:21:29 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_path_is_file $midx &&
|
|
|
|
|
test_path_is_missing $midx-$(midx_checksum $objdir).bitmap
|
|
|
|
|
)
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
test_expect_success 'graceful fallback when missing reverse index' '
|
|
|
|
|
rm -fr repo &&
|
|
|
|
|
git init repo &&
|
|
|
|
|
test_when_finished "rm -fr repo" &&
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
|
|
|
|
git config pack.writeBitmapLookupTable '"$writeLookupTable"' &&
|
midx: prevent writing a .bitmap without any objects
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-09 19:26:47 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_commit base &&
|
midx: prevent writing a .bitmap without any objects
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-09 19:26:47 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
# write a pack and MIDX bitmap containing base
|
|
|
|
|
git repack -adb &&
|
|
|
|
|
git multi-pack-index write --bitmap &&
|
midx: prevent writing a .bitmap without any objects
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-09 19:26:47 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
GIT_TEST_MIDX_READ_RIDX=0 \
|
|
|
|
|
git rev-list --use-bitmap-index HEAD 2>err &&
|
|
|
|
|
! grep "ignoring extra bitmap file" err
|
|
|
|
|
)
|
|
|
|
|
'
|
|
|
|
|
}
|
midx: prevent writing a .bitmap without any objects
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-09 19:26:47 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_midx_bitmap_cases
|
|
|
|
|
|
|
|
|
|
test_midx_bitmap_cases "pack.writeBitmapLookupTable"
|
midx: prevent writing a .bitmap without any objects
When trying to write a MIDX, we already prevent the case where there
weren't any packs present, and thus we would have written an empty MIDX.
But there is another "empty" case, which is more interesting, and we
don't yet handle. If we try to write a MIDX which has at least one pack,
but those packs together don't contain any objects, we will encounter a
BUG() when trying to use the bitmap corresponding to that MIDX, like so:
$ git rev-parse HEAD | git pack-objects --revs --use-bitmap-index --stdout >/dev/null
BUG: pack-revindex.c:394: pack_pos_to_midx: out-of-bounds object at 0
(note that in the above reproduction, both `--use-bitmap-index` and
`--stdout` are important, since without the former we won't even both to
load the .bitmap, and without the latter we wont attempt pack reuse).
The problem occurs when we try to discover the identity of the
preferred pack to determine which range if any of existing packs we can
reuse verbatim. This path is: `reuse_packfile_objects()` ->
`reuse_partial_packfile_from_bitmap()` -> `midx_preferred_pack()`.
#4 0x000055555575401f in pack_pos_to_midx (m=0x555555997160, pos=0) at pack-revindex.c:394
#5 0x00005555557502c8 in midx_preferred_pack (bitmap_git=0x55555599c280) at pack-bitmap.c:1431
#6 0x000055555575036c in reuse_partial_packfile_from_bitmap (bitmap_git=0x55555599c280, packfile_out=0x5555559666b0 <reuse_packfile>,
entries=0x5555559666b8 <reuse_packfile_objects>, reuse_out=0x5555559666c0 <reuse_packfile_bitmap>) at pack-bitmap.c:1452
#7 0x00005555556041f6 in get_object_list_from_bitmap (revs=0x7fffffffcbf0) at builtin/pack-objects.c:3658
#8 0x000055555560465c in get_object_list (ac=2, av=0x555555997050) at builtin/pack-objects.c:3765
#9 0x0000555555605e4e in cmd_pack_objects (argc=0, argv=0x7fffffffe920, prefix=0x0) at builtin/pack-objects.c:4154
Since neither the .bitmap or MIDX stores the identity of the
preferred pack, we infer it by trying to load the first object in
pseudo-pack order, and then asking the MIDX which pack was chosen to
represent that object.
But this fails our bounds check, since there are zero objects in the
MIDX to begin with, which results in the BUG().
We could catch this more carefully in `midx_preferred_pack()`, but
signaling the absence of a preferred pack out to all of its callers is
somewhat awkward.
Instead, let's avoid writing a MIDX .bitmap without any objects
altogether. We catch this case in `write_midx_internal()`, and emit a
warning if the caller indicated they wanted to write a bitmap before
clearing out the relevant flags. If we somehow got to
write_midx_bitmap(), then we will call BUG(), but this should now be an
unreachable path.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-02-09 19:26:47 +00:00
|
|
|
|
2022-08-14 16:55:09 +00:00
|
|
|
test_expect_success 'multi-pack-index write writes lookup table if enabled' '
|
pack-bitmap.c: gracefully fallback after opening pack/MIDX
When opening a MIDX/pack-bitmap, we call open_midx_bitmap_1() or
open_pack_bitmap_1() respectively in a loop over the set of MIDXs/packs.
By design, these functions are supposed to be called over every pack and
MIDX, since only one of them should have a valid bitmap.
Ordinarily we return '0' from these two functions in order to indicate
that we successfully loaded a bitmap To signal that we couldn't load a
bitmap corresponding to the MIDX/pack (either because one doesn't exist,
or because there was an error with loading it), we can return '-1'. In
either case, the callers each enumerate all MIDXs/packs to ensure that
at most one bitmap per-kind is present.
But when we fail to load a bitmap that does exist (for example, loading
a MIDX bitmap without finding a corresponding reverse index), we'll
return -1 but leave the 'midx' field non-NULL. So when we fallback to
loading a pack bitmap, we'll complain that the bitmap we're trying to
populate already is "opened", even though it isn't.
Rectify this by setting the '->pack' and '->midx' field back to NULL as
appropriate. Two tests are added: one to ensure that the MIDX-to-pack
bitmap fallback works, and another to ensure we still complain when
there are multiple pack bitmaps in a repository.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:20 +00:00
|
|
|
rm -fr repo &&
|
|
|
|
|
git init repo &&
|
|
|
|
|
test_when_finished "rm -fr repo" &&
|
|
|
|
|
(
|
|
|
|
|
cd repo &&
|
|
|
|
|
test_commit base &&
|
2022-08-14 16:55:09 +00:00
|
|
|
git config pack.writeBitmapLookupTable true &&
|
|
|
|
|
git repack -ad &&
|
|
|
|
|
GIT_TRACE2_EVENT="$(pwd)/trace" \
|
|
|
|
|
git multi-pack-index write --bitmap &&
|
|
|
|
|
grep "\"label\":\"writing_lookup_table\"" trace
|
pack-bitmap.c: gracefully fallback after opening pack/MIDX
When opening a MIDX/pack-bitmap, we call open_midx_bitmap_1() or
open_pack_bitmap_1() respectively in a loop over the set of MIDXs/packs.
By design, these functions are supposed to be called over every pack and
MIDX, since only one of them should have a valid bitmap.
Ordinarily we return '0' from these two functions in order to indicate
that we successfully loaded a bitmap To signal that we couldn't load a
bitmap corresponding to the MIDX/pack (either because one doesn't exist,
or because there was an error with loading it), we can return '-1'. In
either case, the callers each enumerate all MIDXs/packs to ensure that
at most one bitmap per-kind is present.
But when we fail to load a bitmap that does exist (for example, loading
a MIDX bitmap without finding a corresponding reverse index), we'll
return -1 but leave the 'midx' field non-NULL. So when we fallback to
loading a pack bitmap, we'll complain that the bitmap we're trying to
populate already is "opened", even though it isn't.
Rectify this by setting the '->pack' and '->midx' field back to NULL as
appropriate. Two tests are added: one to ensure that the MIDX-to-pack
bitmap fallback works, and another to ensure we still complain when
there are multiple pack bitmaps in a repository.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-25 22:41:20 +00:00
|
|
|
)
|
|
|
|
|
'
|
|
|
|
|
|
t5326: demonstrate potential bitmap corruption
It is possible to generate a corrupt MIDX bitmap when certain conditions
are met. This happens when the preferred pack "P" changes to one (say,
"Q") that:
- "Q" has objects included in an existing MIDX,
- but "Q" is different than "P",
- and "Q" and "P" have some objects in common
When this is the case, not all objects from "Q" will be selected from
"Q" (ie., the generated MIDX will represent them as coming from a
different pack), despite "Q" being preferred.
This is an invariant violation, since all objects contained in the
MIDX's preferred pack are supposed to originate from the preferred pack.
In other words, all duplicate objects are resolved in favor of the copy
that comes from the MIDX's preferred pack, if any.
This violation results in a corrupt object order, which cannot be
interpreted by the pack-bitmap code, leading to broken clones and other
defects.
This test demonstrates the above problem by constructing a minimal
reproduction, and showing that the final `git clone` invocation fails.
The reproduction is mostly straightforward, except that the new pack
generated between MIDX writes (which is necessary in order to prevent
that operation from being a noop) must sort ahead of all existing packs
in order to prevent a different pack (neither "P" nor "Q") from
appearing as preferred (meaning all its objects appear in order at the
beginning of the pseudo-pack order).
Subsequent commits will first refactor the midx.c::get_sorted_entries()
function, and then fix this bug.
Reported-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-08-22 19:50:32 +00:00
|
|
|
test_expect_success 'preferred pack change with existing MIDX bitmap' '
|
|
|
|
|
git init preferred-pack-with-existing &&
|
|
|
|
|
(
|
|
|
|
|
cd preferred-pack-with-existing &&
|
|
|
|
|
|
|
|
|
|
test_commit base &&
|
|
|
|
|
test_commit other &&
|
|
|
|
|
|
|
|
|
|
git rev-list --objects --no-object-names base >p1.objects &&
|
|
|
|
|
git rev-list --objects --no-object-names other >p2.objects &&
|
|
|
|
|
|
|
|
|
|
p1="$(git pack-objects "$objdir/pack/pack" \
|
|
|
|
|
--delta-base-offset <p1.objects)" &&
|
|
|
|
|
p2="$(git pack-objects "$objdir/pack/pack" \
|
|
|
|
|
--delta-base-offset <p2.objects)" &&
|
|
|
|
|
|
|
|
|
|
# Generate a MIDX containing the first two packs,
|
|
|
|
|
# marking p1 as preferred, and ensure that it can be
|
|
|
|
|
# successfully cloned.
|
|
|
|
|
git multi-pack-index write --bitmap \
|
|
|
|
|
--preferred-pack="pack-$p1.pack" &&
|
|
|
|
|
test_path_is_file $midx &&
|
|
|
|
|
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
|
|
|
|
|
git clone --no-local . clone1 &&
|
|
|
|
|
|
|
|
|
|
# Then generate a new pack which sorts ahead of any
|
|
|
|
|
# existing pack (by tweaking the pack prefix).
|
|
|
|
|
test_commit foo &&
|
|
|
|
|
git pack-objects --all --unpacked $objdir/pack/pack0 &&
|
|
|
|
|
|
|
|
|
|
# Generate a new MIDX which changes the preferred pack
|
midx.c: include preferred pack correctly with existing MIDX
This patch resolves an issue where the object order used to generate a
MIDX bitmap would violate an invariant that all of the preferred pack's
objects are represented by that pack in the MIDX.
The problem arises when reusing an existing MIDX while generating a new
one, and occurs specifically when the identity of the preferred pack
changes from one MIDX to another, along with a few other conditions:
- the new preferred pack must also be present in the existing MIDX
- the new preferred pack must *not* have been the preferred pack in
the existing MIDX
- most importantly, there must be at least one object present in the
physical preferred pack (ie., it shows up in that pack's index)
but was selected from a *different* pack when the previous MIDX
was generated
When the above conditions are all met, we end up (incorrectly)
discarding copies of some objects in the pack selected as the preferred
pack. This is because `get_sorted_entries()` adds objects to its list
by doing the following at each fanout level:
- first, adding all objects from that fanout level from an existing
MIDX
- then, adding all objects from that fanout level in each pack *not*
included in the existing MIDX
So if some object was not selected from the to-be-preferred pack when
writing the previous MIDX, then we will never consider it as a candidate
when generating the new MIDX. This means that it's possible for the
preferred pack to not include all of its objects in the MIDX's
pseudo-pack object order, which is an invariant violation of that order.
Resolve this by adding all objects from the preferred pack separately
when it appears in the existing MIDX (if one was present). This will
duplicate objects from that pack that *did* appear in the MIDX, but this
is fine, since get_sorted_entries() already handles duplicates. (A
future optimization in this area could avoid adding copies of objects
that we know already existing in the MIDX.)
Note that we no longer need to compute the preferred-ness of objects
added from the MIDX, since we only want to select the preferred objects
from a single source. (We could still mark these preferred bits, but
doing so is redundant and unnecessary).
This resolves the bug demonstrated by t5326.174 ("preferred pack change
with existing MIDX bitmap").
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-08-22 19:50:46 +00:00
|
|
|
# to a pack contained in the existing MIDX.
|
t5326: demonstrate potential bitmap corruption
It is possible to generate a corrupt MIDX bitmap when certain conditions
are met. This happens when the preferred pack "P" changes to one (say,
"Q") that:
- "Q" has objects included in an existing MIDX,
- but "Q" is different than "P",
- and "Q" and "P" have some objects in common
When this is the case, not all objects from "Q" will be selected from
"Q" (ie., the generated MIDX will represent them as coming from a
different pack), despite "Q" being preferred.
This is an invariant violation, since all objects contained in the
MIDX's preferred pack are supposed to originate from the preferred pack.
In other words, all duplicate objects are resolved in favor of the copy
that comes from the MIDX's preferred pack, if any.
This violation results in a corrupt object order, which cannot be
interpreted by the pack-bitmap code, leading to broken clones and other
defects.
This test demonstrates the above problem by constructing a minimal
reproduction, and showing that the final `git clone` invocation fails.
The reproduction is mostly straightforward, except that the new pack
generated between MIDX writes (which is necessary in order to prevent
that operation from being a noop) must sort ahead of all existing packs
in order to prevent a different pack (neither "P" nor "Q") from
appearing as preferred (meaning all its objects appear in order at the
beginning of the pseudo-pack order).
Subsequent commits will first refactor the midx.c::get_sorted_entries()
function, and then fix this bug.
Reported-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-08-22 19:50:32 +00:00
|
|
|
git multi-pack-index write --bitmap \
|
|
|
|
|
--preferred-pack="pack-$p2.pack" &&
|
|
|
|
|
test_path_is_file $midx &&
|
|
|
|
|
test_path_is_file $midx-$(midx_checksum $objdir).bitmap &&
|
|
|
|
|
|
midx.c: include preferred pack correctly with existing MIDX
This patch resolves an issue where the object order used to generate a
MIDX bitmap would violate an invariant that all of the preferred pack's
objects are represented by that pack in the MIDX.
The problem arises when reusing an existing MIDX while generating a new
one, and occurs specifically when the identity of the preferred pack
changes from one MIDX to another, along with a few other conditions:
- the new preferred pack must also be present in the existing MIDX
- the new preferred pack must *not* have been the preferred pack in
the existing MIDX
- most importantly, there must be at least one object present in the
physical preferred pack (ie., it shows up in that pack's index)
but was selected from a *different* pack when the previous MIDX
was generated
When the above conditions are all met, we end up (incorrectly)
discarding copies of some objects in the pack selected as the preferred
pack. This is because `get_sorted_entries()` adds objects to its list
by doing the following at each fanout level:
- first, adding all objects from that fanout level from an existing
MIDX
- then, adding all objects from that fanout level in each pack *not*
included in the existing MIDX
So if some object was not selected from the to-be-preferred pack when
writing the previous MIDX, then we will never consider it as a candidate
when generating the new MIDX. This means that it's possible for the
preferred pack to not include all of its objects in the MIDX's
pseudo-pack object order, which is an invariant violation of that order.
Resolve this by adding all objects from the preferred pack separately
when it appears in the existing MIDX (if one was present). This will
duplicate objects from that pack that *did* appear in the MIDX, but this
is fine, since get_sorted_entries() already handles duplicates. (A
future optimization in this area could avoid adding copies of objects
that we know already existing in the MIDX.)
Note that we no longer need to compute the preferred-ness of objects
added from the MIDX, since we only want to select the preferred objects
from a single source. (We could still mark these preferred bits, but
doing so is redundant and unnecessary).
This resolves the bug demonstrated by t5326.174 ("preferred pack change
with existing MIDX bitmap").
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-08-22 19:50:46 +00:00
|
|
|
# When the above circumstances are met, the preferred
|
|
|
|
|
# pack should change appropriately and clones should
|
|
|
|
|
# (still) succeed.
|
|
|
|
|
git clone --no-local . clone2
|
t5326: demonstrate potential bitmap corruption
It is possible to generate a corrupt MIDX bitmap when certain conditions
are met. This happens when the preferred pack "P" changes to one (say,
"Q") that:
- "Q" has objects included in an existing MIDX,
- but "Q" is different than "P",
- and "Q" and "P" have some objects in common
When this is the case, not all objects from "Q" will be selected from
"Q" (ie., the generated MIDX will represent them as coming from a
different pack), despite "Q" being preferred.
This is an invariant violation, since all objects contained in the
MIDX's preferred pack are supposed to originate from the preferred pack.
In other words, all duplicate objects are resolved in favor of the copy
that comes from the MIDX's preferred pack, if any.
This violation results in a corrupt object order, which cannot be
interpreted by the pack-bitmap code, leading to broken clones and other
defects.
This test demonstrates the above problem by constructing a minimal
reproduction, and showing that the final `git clone` invocation fails.
The reproduction is mostly straightforward, except that the new pack
generated between MIDX writes (which is necessary in order to prevent
that operation from being a noop) must sort ahead of all existing packs
in order to prevent a different pack (neither "P" nor "Q") from
appearing as preferred (meaning all its objects appear in order at the
beginning of the pseudo-pack order).
Subsequent commits will first refactor the midx.c::get_sorted_entries()
function, and then fix this bug.
Reported-by: Abhradeep Chakraborty <chakrabortyabhradeep79@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-08-22 19:50:32 +00:00
|
|
|
)
|
|
|
|
|
'
|
|
|
|
|
|
2021-08-31 20:52:31 +00:00
|
|
|
test_done
|