development/git
development/git
1
0
Fork 0
mirror of https://github.com/git/git synced 2024-08-24 10:15:51 +00:00
Code Issues Packages Projects Releases Wiki Activity
git/t/t5541-http-push-smart.sh

527 lines
17 KiB
Bash
Raw Normal View History

test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
#!/bin/sh
#
# Copyright (c) 2008 Clemens Buchacher <drizzd@aon.at>
#
test_description='test smart pushing over http via http-backend'
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main
tests: mark tests relying on the current default for `init.defaultBranch` In addition to the manual adjustment to let the `linux-gcc` CI job run the test suite with `master` and then with `main`, this patch makes sure that GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME is set in all test scripts that currently rely on the initial branch name being `master by default. To determine which test scripts to mark up, the first step was to force-set the default branch name to `master` in - all test scripts that contain the keyword `master`, - t4211, which expects `t/t4211/history.export` with a hard-coded ref to initialize the default branch, - t5560 because it sources `t/t556x_common` which uses `master`, - t8002 and t8012 because both source `t/annotate-tests.sh` which also uses `master`) This trick was performed by this command: $ sed -i '/^ *\. \.\/\(test-lib\|lib-\(bash\|cvs\|git-svn\)\|gitweb-lib\)\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' $(git grep -l master t/t[0-9]*.sh) \ t/t4211*.sh t/t5560*.sh t/t8002*.sh t/t8012*.sh After that, careful, manual inspection revealed that some of the test scripts containing the needle `master` do not actually rely on a specific default branch name: either they mention `master` only in a comment, or they initialize that branch specificially, or they do not actually refer to the current default branch. Therefore, the aforementioned modification was undone in those test scripts thusly: $ git checkout HEAD -- \ t/t0027-auto-crlf.sh t/t0060-path-utils.sh \ t/t1011-read-tree-sparse-checkout.sh \ t/t1305-config-include.sh t/t1309-early-config.sh \ t/t1402-check-ref-format.sh t/t1450-fsck.sh \ t/t2024-checkout-dwim.sh \ t/t2106-update-index-assume-unchanged.sh \ t/t3040-subprojects-basic.sh t/t3301-notes.sh \ t/t3308-notes-merge.sh t/t3423-rebase-reword.sh \ t/t3436-rebase-more-options.sh \ t/t4015-diff-whitespace.sh t/t4257-am-interactive.sh \ t/t5323-pack-redundant.sh t/t5401-update-hooks.sh \ t/t5511-refspec.sh t/t5526-fetch-submodules.sh \ t/t5529-push-errors.sh t/t5530-upload-pack-error.sh \ t/t5548-push-porcelain.sh \ t/t5552-skipping-fetch-negotiator.sh \ t/t5572-pull-submodule.sh t/t5608-clone-2gb.sh \ t/t5614-clone-submodules-shallow.sh \ t/t7508-status.sh t/t7606-merge-custom.sh \ t/t9302-fast-import-unpack-limit.sh We excluded one set of test scripts in these commands, though: the range of `git p4` tests. The reason? `git p4` stores the (foreign) remote branch in the branch called `p4/master`, which is obviously not the default branch. Manual analysis revealed that only five of these tests actually require a specific default branch name to pass; They were modified thusly: $ sed -i '/^ *\. \.\/lib-git-p4\.sh$/i\ GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=master\ export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME\ ' t/t980[0167]*.sh t/t9811*.sh Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:19 +00:00
export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
. ./test-lib.sh
ROOT_PATH="$PWD"
signed push: teach smart-HTTP to pass "git push --signed" around The "--signed" option received by "git push" is first passed to the transport layer, which the native transport directly uses to notice that a push certificate needs to be sent. When the transport-helper is involved, however, the option needs to be told to the helper with set_helper_option(), and the helper needs to take necessary action. For the smart-HTTP helper, the "necessary action" involves spawning the "git send-pack" subprocess with the "--signed" option. Once the above all gets wired in, the smart-HTTP transport now can use the push certificate mechanism to authenticate its pushes. Add a test that is modeled after tests for the native transport in t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test Apache configuration to pass GNUPGHOME environment variable through. As PassEnv would trigger warnings for an environment variable that is not set, export it from test-lib.sh set to a harmless value when GnuPG is not being used in the tests. Note that the added test is deliberately loose and does not check the nonce in this step. This is because the stateless RPC mode is inevitably flaky and a nonce that comes back in the actual push processing is one issued by a different process; if the two interactions with the server crossed a second boundary, the nonces will not match and such a check will fail. A later patch in the series will work around this shortcoming. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-15 21:59:00 +00:00
. "$TEST_DIRECTORY"/lib-gpg.sh
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
. "$TEST_DIRECTORY"/lib-httpd.sh
t5541: avoid TAP test miscounting lib-terminal.sh runs a test and thus increases the test count, but the output is lost so that TAP produces a "no plan found error". Move the lib-terminal call after the lib-httpd and make TAP happy (though still leave me clueless). Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08 21:06:21 +00:00
. "$TEST_DIRECTORY"/lib-terminal.sh
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
start_httpd
test_expect_success 'setup remote repository' '
cd "$ROOT_PATH" &&
mkdir test_repo &&
cd test_repo &&
git init &&
: >path1 &&
git add path1 &&
test_tick &&
git commit -m initial &&
cd - &&
git clone --bare test_repo test_repo.git &&
cd test_repo.git &&
git config http.receivepack true &&
http-backend: respect existing GIT_COMMITTER_* variables The http-backend program sets default GIT_COMMITTER_NAME and GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and REMOTE_ADDR variables provided by the webserver. However, it unconditionally overwrites any existing GIT_COMMITTER variables, which may have been customized by site-specific code in the webserver (or in a script wrapping http-backend). Let's leave those variables intact if they already exist, assuming that any such configuration was intentional. There is a slight chance of a regression if somebody has set GIT_COMMITTER_* for the entire webserver, not intending it to leak through http-backend. We could protect against this by passing the information in alternate variables. However, it seems unlikely that anyone will care about that regression, and there is value in the simplicity of using the common variable names that are used elsewhere in git. While we're tweaking the environment-handling in http-backend, let's switch it to use argv_array to handle the list of variables. That makes the memory management much simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-30 07:01:30 +00:00
git config core.logallrefupdates true &&
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
ORIG_HEAD=$(git rev-parse --verify HEAD) &&
cd - &&
mv test_repo.git "$HTTPD_DOCUMENT_ROOT_PATH"
'
t: test basic smart-http authentication We do not currently test authentication over smart-http at all. In theory, it should work exactly as it does for dumb http (which we do test). It does indeed work for these simple tests, but this patch lays the groundwork for more complex tests in future patches. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 13:25:36 +00:00
setup_askpass_helper
t5541-http-push: add test for URLs with trailing slash Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 02:15:16 +00:00
cat >exp <<EOF
GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200
POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200
EOF
remote-curl: ensure that URLs have a trailing slash Previously, we blindly assumed that URLs passed to the remote-curl helper did not end with a trailing slash. Use the convenience function end_url_with_slash() from http.[ch] to ensure that URLs have a trailing slash on invocation of the remote-curl helper, and use the URL as one with a trailing slash throughout. It is possible for users to pass a URL with a trailing slash to remote-curl, by, say, setting it in remote.<name>.url in their git config. The resulting requests have an empty path component (//) and may break implementations of the http git protocol. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 02:15:18 +00:00
test_expect_success 'no empty path components' '
t5541: clean up truncating access log In the second test of 't5541-http-push-smart.sh', 'no empty path components' we truncate Apache's access log by running: echo >.../access.log There are two issues with this approach: - This doesn't leave an empty file behind, like a proper truncation would, but a file with a lone newline in it. Consequently, a later test checking the log's contents must consider this improper truncation and include an empty line in the expected content. - This truncation is done in the middle of the test, because, quoting the in-code comment, "we do this [truncation] before the actual comparison to ensure the log is cleared" even when subsequent 'test_cmp' fails. Alas, this is not quite robust enough, as it is conceivable that 'git clone' fails after already having sent a request, in which case the access log would not be truncated and would leave stray log entries behind. Since there is no need for that newline at all, drop the 'echo' from the truncation and adjust the expected content accordingly. Furthermore, make sure that the truncation is performed no matter whether and how 'git clone' fails unexpectedly by specifying it as a 'test_when_finished' command. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-07-12 12:22:14 +00:00
# Clear the log, so that it does not affect the "used receive-pack
# service" test which reads the log too.
test_when_finished ">\"\$HTTPD_ROOT_PATH\"/access.log" &&
t5541-http-push: add test for URLs with trailing slash Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 02:15:16 +00:00
# In the URL, add a trailing slash, and see if git appends yet another
# slash.
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
cd "$ROOT_PATH" &&
t5541-http-push: add test for URLs with trailing slash Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 02:15:16 +00:00
git clone $HTTPD_URL/smart/test_repo.git/ test_repo_clone &&
tests: fix protocol version for overspecifications These tests are also marked with a NEEDSWORK comment. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-25 21:54:12 +00:00
# NEEDSWORK: If the overspecification of the expected result is reduced, we
# might be able to run this test in all protocol versions.
test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate Since 8cbeba0632 (tests: define GIT_TEST_PROTOCOL_VERSION, 2019-02-25), it has been possible to run tests with a newer protocol version by setting the GIT_TEST_PROTOCOL_VERSION envvar to a version number. Tests that assume protocol v0 handle this by explicitly setting GIT_TEST_PROTOCOL_VERSION= or similar constructs like 'test -z "$GIT_TEST_PROTOCOL_VERSION" || return 0' to declare that they only handle the default (v0) protocol. The emphasis there is a bit off: it would be clearer to specify GIT_TEST_PROTOCOL_VERSION=0 to inform the reader that these tests are specifically testing and relying on details of protocol v0. Do so. This way, a reader does not need to know what the default protocol version is, and the tests can continue to work when the default protocol version used by Git advances past v0. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-24 01:01:10 +00:00
if test "$GIT_TEST_PROTOCOL_VERSION" = 0
tests: fix protocol version for overspecifications These tests are also marked with a NEEDSWORK comment. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-25 21:54:12 +00:00
then
check_access_log exp
fi
t5541-http-push: add test for URLs with trailing slash Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 02:15:16 +00:00
'
test_expect_success 'clone remote repository' '
rm -rf test_repo_clone &&
push: start warning upcoming default change for push.default In preparation for flipping the default to the "simple" mode from the "matching" mode that is the historical default, start warning users when they rely on unconfigured "git push" to default to the "matching" mode. Also, advertise for 'simple' where 'current' and 'upstream' are advised. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-24 11:01:37 +00:00
git clone $HTTPD_URL/smart/test_repo.git test_repo_clone &&
(
cd test_repo_clone && git config push.default matching
)
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
'
t5541-http-push: add test for chunked Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 17:19:50 +00:00
test_expect_success 'push to remote repository (standard)' '
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
cd "$ROOT_PATH"/test_repo_clone &&
: >path2 &&
git add path2 &&
test_tick &&
git commit -m path2 &&
HEAD=$(git rev-parse --verify HEAD) &&
t5541-http-push-smart.sh: use the GIT_TRACE_CURL environment var Use the new GIT_TRACE_CURL environment variable instead of the deprecated GIT_CURL_VERBOSE. Signed-off-by: Elia Pinto <gitter.spiros@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-09-05 10:24:41 +00:00
GIT_TRACE_CURL=true git push -v -v 2>err &&
t5541-http-push: add test for chunked Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 17:19:50 +00:00
! grep "Expect: 100-continue" err &&
grep "POST git-receive-pack ([0-9]* bytes)" err &&
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
(cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git &&
test $HEAD = $(git rev-parse --verify HEAD))
'
test_expect_success 'push already up-to-date' '
git push
'
test_expect_success 'create and delete remote branch' '
cd "$ROOT_PATH"/test_repo_clone &&
git checkout -b dev &&
: >path3 &&
git add path3 &&
test_tick &&
git commit -m dev &&
git push origin dev &&
git push origin :dev &&
test_must_fail git show-ref --verify refs/remotes/origin/dev
'
tests: use "test_hook" for misc "mkdir -p" and "chmod" cases Make use of "test_hook" in various cases that didn't fit neatly into preceding commits. Here we need to indent blocks in addition to changing the test code, or to make other small cosmetic changes. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-03-17 10:13:15 +00:00
test_expect_success 'setup rejected update hook' '
test_hook --setup -C "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" update <<-\EOF &&
exit 1
EOF
remote-curl: Fix push status report when all branches fail The protocol between transport-helper.c and remote-curl requires remote-curl to always print a blank line after the push command has run. If the blank line is ommitted, transport-helper kills its container process (the git push the user started) with exit(128) and no message indicating a problem, assuming the helper already printed reasonable error text to the console. However if the remote rejects all branches with "ng" commands in the report-status reply, send-pack terminates with non-zero status, and in turn remote-curl exited with non-zero status before outputting the blank line after the helper status printed by send-pack. No error messages reach the user. This caused users to see the following from git push over HTTP when the remote side's update hook rejected the branch: $ git push http://... master Counting objects: 4, done. Delta compression using up to 6 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 301 bytes, done. Total 3 (delta 0), reused 0 (delta 0) $ Always print a blank line after the send-pack process terminates, ensuring the helper status report (if it was output) will be correctly parsed by the calling transport-helper.c. This ensures the helper doesn't abort before the status report can be shown to the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-20 03:12:09 +00:00
tests: use "test_hook" for misc "mkdir -p" and "chmod" cases Make use of "test_hook" in various cases that didn't fit neatly into preceding commits. Here we need to indent blocks in addition to changing the test code, or to make other small cosmetic changes. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-03-17 10:13:15 +00:00
cat >exp <<-EOF
remote: error: hook declined to update refs/heads/dev2
To http://127.0.0.1:$LIB_HTTPD_PORT/smart/test_repo.git
! [remote rejected] dev2 -> dev2 (hook declined)
error: failed to push some refs to '\''http://127.0.0.1:$LIB_HTTPD_PORT/smart/test_repo.git'\''
EOF
'
remote-curl: Fix push status report when all branches fail The protocol between transport-helper.c and remote-curl requires remote-curl to always print a blank line after the push command has run. If the blank line is ommitted, transport-helper kills its container process (the git push the user started) with exit(128) and no message indicating a problem, assuming the helper already printed reasonable error text to the console. However if the remote rejects all branches with "ng" commands in the report-status reply, send-pack terminates with non-zero status, and in turn remote-curl exited with non-zero status before outputting the blank line after the helper status printed by send-pack. No error messages reach the user. This caused users to see the following from git push over HTTP when the remote side's update hook rejected the branch: $ git push http://... master Counting objects: 4, done. Delta compression using up to 6 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 301 bytes, done. Total 3 (delta 0), reused 0 (delta 0) $ Always print a blank line after the send-pack process terminates, ensuring the helper status report (if it was output) will be correctly parsed by the calling transport-helper.c. This ensures the helper doesn't abort before the status report can be shown to the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-20 03:12:09 +00:00
test_expect_success 'rejected update prints status' '
cd "$ROOT_PATH"/test_repo_clone &&
git checkout -b dev2 &&
: >path4 &&
git add path4 &&
test_tick &&
git commit -m dev2 &&
test_must_fail git push origin dev2 2>act &&
sed -e "/^remote: /s/ *$//" <act >cmp &&
tests: remove most uses of test_i18ncmp As a follow-up to d162b25f956 (tests: remove support for GIT_TEST_GETTEXT_POISON, 2021-01-20) remove most uses of test_i18ncmp via a simple s/test_i18ncmp/test_cmp/g search-replacement. I'm leaving t6300-for-each-ref.sh out due to a conflict with in-flight changes between "master" and "seen", as well as the prerequisite itself due to other changes between "master" and "next/seen" which add new test_i18ncmp uses. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-02-11 01:53:53 +00:00
test_cmp exp cmp
remote-curl: Fix push status report when all branches fail The protocol between transport-helper.c and remote-curl requires remote-curl to always print a blank line after the push command has run. If the blank line is ommitted, transport-helper kills its container process (the git push the user started) with exit(128) and no message indicating a problem, assuming the helper already printed reasonable error text to the console. However if the remote rejects all branches with "ng" commands in the report-status reply, send-pack terminates with non-zero status, and in turn remote-curl exited with non-zero status before outputting the blank line after the helper status printed by send-pack. No error messages reach the user. This caused users to see the following from git push over HTTP when the remote side's update hook rejected the branch: $ git push http://... master Counting objects: 4, done. Delta compression using up to 6 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 301 bytes, done. Total 3 (delta 0), reused 0 (delta 0) $ Always print a blank line after the send-pack process terminates, ensuring the helper status report (if it was output) will be correctly parsed by the calling transport-helper.c. This ensures the helper doesn't abort before the status report can be shown to the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-20 03:12:09 +00:00
'
rm -f "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update"
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
cat >exp <<EOF
GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200
POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200
remote-curl: Fix push status report when all branches fail The protocol between transport-helper.c and remote-curl requires remote-curl to always print a blank line after the push command has run. If the blank line is ommitted, transport-helper kills its container process (the git push the user started) with exit(128) and no message indicating a problem, assuming the helper already printed reasonable error text to the console. However if the remote rejects all branches with "ng" commands in the report-status reply, send-pack terminates with non-zero status, and in turn remote-curl exited with non-zero status before outputting the blank line after the helper status printed by send-pack. No error messages reach the user. This caused users to see the following from git push over HTTP when the remote side's update hook rejected the branch: $ git push http://... master Counting objects: 4, done. Delta compression using up to 6 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 301 bytes, done. Total 3 (delta 0), reused 0 (delta 0) $ Always print a blank line after the send-pack process terminates, ensuring the helper status report (if it was output) will be correctly parsed by the calling transport-helper.c. This ensures the helper doesn't abort before the status report can be shown to the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-20 03:12:09 +00:00
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
EOF
test_expect_success 'used receive-pack service' '
tests: fix protocol version for overspecifications These tests are also marked with a NEEDSWORK comment. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-25 21:54:12 +00:00
# NEEDSWORK: If the overspecification of the expected result is reduced, we
# might be able to run this test in all protocol versions.
test: request GIT_TEST_PROTOCOL_VERSION=0 when appropriate Since 8cbeba0632 (tests: define GIT_TEST_PROTOCOL_VERSION, 2019-02-25), it has been possible to run tests with a newer protocol version by setting the GIT_TEST_PROTOCOL_VERSION envvar to a version number. Tests that assume protocol v0 handle this by explicitly setting GIT_TEST_PROTOCOL_VERSION= or similar constructs like 'test -z "$GIT_TEST_PROTOCOL_VERSION" || return 0' to declare that they only handle the default (v0) protocol. The emphasis there is a bit off: it would be clearer to specify GIT_TEST_PROTOCOL_VERSION=0 to inform the reader that these tests are specifically testing and relying on details of protocol v0. Do so. This way, a reader does not need to know what the default protocol version is, and the tests can continue to work when the default protocol version used by Git advances past v0. Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-12-24 01:01:10 +00:00
if test "$GIT_TEST_PROTOCOL_VERSION" = 0
tests: fix protocol version for overspecifications These tests are also marked with a NEEDSWORK comment. Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-02-25 21:54:12 +00:00
then
check_access_log exp
fi
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
'
t554[01]-http-push: refactor, add non-ff tests Move non-fast forward tests to lib-httpd.sh so that we don't have to duplicate the tests in both t5540 and t5541. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02 10:49:26 +00:00
test_http_push_nonff "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git \
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
"$ROOT_PATH"/test_repo_clone main success
t5541-http-push.sh: add tests for non-fast-forward pushes Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 02:12:40 +00:00
transport-helper.c::push_refs(): ignore helper-reported status if ref is not to be pushed If the status of a ref is REF_STATUS_NONE, the remote helper will not be told to push the ref (via a 'push' command). However, the remote helper may still act on these refs. If the helper does act on the ref, and prints a status for it, ignore the report (ie. don't overwrite the status of the ref with it, nor the message in the remote_status member) if the reported status is 'no match'. This allows the user to be alerted to more "interesting" ref statuses, like REF_STATUS_NONFASTFORWARD. Cc: Jeff King <peff@peff.net> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 02:12:44 +00:00
test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper' '
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 02:12:41 +00:00
# create a dissimilarly-named remote ref so that git is unable to match the
# two refs (viz. local, remote) unless an explicit refspec is provided.
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
git push origin main:niam &&
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 02:12:41 +00:00
echo "change changed" > path2 &&
git commit -a -m path2 --amend &&
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
# push main too; this ensures there is at least one '"'push'"' command to
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 02:12:41 +00:00
# the remote helper and triggers interaction with the helper.
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
test_must_fail git push -v origin +main main:niam >output 2>&1'
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 02:12:41 +00:00
i18n: git-push "prevent you from losing" message Gettextize the "To prevent you from losing history" message. A test in lib-httpd.sh and another in t5541-http-push.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-22 23:42:12 +00:00
test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: remote output' '
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
grep "^ + [a-f0-9]*\.\.\.[a-f0-9]* *main -> main (forced update)$" output &&
grep "^ ! \[rejected\] *main -> niam (non-fast-forward)$" output
i18n: git-push "prevent you from losing" message Gettextize the "To prevent you from losing history" message. A test in lib-httpd.sh and another in t5541-http-push.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-22 23:42:12 +00:00
'
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 02:12:41 +00:00
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060 Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-12 23:33:39 +00:00
test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: our output' '
Fix httpd tests that broke when non-ff push advice changed Signed-off-by: Christopher Tiwald <christiwald@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-12 17:56:28 +00:00
test_i18ngrep "Updates were rejected because" \
t5541-http-push: make grep expression check for one line only Don't feed a multiple-line pattern to grep and expect the them to match with lines in order. Simplify the grep expressions in the non-fast-forward tests to check only for the first line of the non-fast-forward warning - having that line should be enough assurance that the full warning is printed. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-25 07:42:23 +00:00
output
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 02:12:41 +00:00
'
t5541-http-push: add test for chunked Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 17:19:50 +00:00
test_expect_success 'push (chunked)' '
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
git checkout main &&
t5541-http-push: add test for chunked Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 17:19:50 +00:00
test_commit commit path3 &&
HEAD=$(git rev-parse --verify HEAD) &&
t5541: use test_config to set/unset git config variables Instead of using construct such as: test_when_finished "git config --unset <key>" git config <key> <value> uses test_config <key> <value> The latter takes care of removing <key> at the end of the test. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-24 21:06:08 +00:00
test_config http.postbuffer 4 &&
t5541-http-push: add test for chunked Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 17:19:50 +00:00
git push -v -v origin $BRANCH 2>err &&
grep "POST git-receive-pack (chunked)" err &&
(cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git &&
test $HEAD = $(git rev-parse --verify HEAD))
'
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
## References of remote: atomic1(1) main(2) collateral(2) other(2)
## References of local : atomic2(2) main(1) collateral(3) other(2) collateral1(3) atomic(1)
## Atomic push : main(1) collateral(3) atomic(1)
transport-helper: mark failure for atomic push Commit v2.22.0-1-g3bca1e7f9f (transport-helper: enforce atomic in push_refs_with_push, 2019-07-11) noticed the incomplete report of failure of an atomic push for HTTP protocol. But the implementation has a flaw that mark all remote references as failure. Only mark necessary references as failure in `push_refs_with_push()` of transport-helper. Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-17 09:45:35 +00:00
test_expect_success 'push --atomic also prevents branch creation, reports collateral' '
transport-helper: enforce atomic in push_refs_with_push Teach transport-helper how to notice if skipping a ref during push would violate atomicity on the client side. We notice that a ref would be rejected, and choose not to send it, but don't notice that if the client has asked for --atomic we are violating atomicity if all the other pushes we are sending would succeed. Asking the server end to uphold atomicity wouldn't work here as the server doesn't have any idea that we tried to update a ref that's broken. The added test-case is a succinct way to reproduce this issue that fails today. The same steps work fine when we aren't using a transport-helper to get to the upstream, i.e. when we've added a local repository as a remote: git remote add ~/upstream upstream Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11 21:19:19 +00:00
# Setup upstream repo - empty for now
d=$HTTPD_DOCUMENT_ROOT_PATH/atomic-branches.git &&
git init --bare "$d" &&
test_config -C "$d" http.receivepack true &&
up="$HTTPD_URL"/smart/atomic-branches.git &&
remote-curl: pass on atomic capability to remote side When pushing more than one reference with the --atomic option, the server is supposed to perform a single atomic transaction to update the references, leaving them either all to succeed or all to fail. This works fine when pushing locally or over SSH, but when pushing over HTTP, we fail to pass the atomic capability to the remote side. In fact, we have not reported this capability to any remote helpers during the life of the feature. Now normally, things happen to work nevertheless, since we actually check for most types of failures, such as non-fast-forward updates, on the client side, and just abort the entire attempt. However, if the server side reports a problem, such as the inability to lock a ref, the transaction isn't atomic, because we haven't passed the appropriate capability over and the remote side has no way of knowing that we wanted atomic behavior. Fix this by passing the option from the transport code through to remote helpers, and from the HTTP remote helper down to send-pack. With this change, we can detect if the server side rejects the push and report back appropriately. Note the difference in the messages: the remote side reports "atomic transaction failed", while our own checking rejects pushes with the message "atomic push failed". Document the atomic option in the remote helper documentation, so other implementers can implement it if they like. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-16 23:45:34 +00:00
# Tell "$up" about three branches for now
transport-helper: enforce atomic in push_refs_with_push Teach transport-helper how to notice if skipping a ref during push would violate atomicity on the client side. We notice that a ref would be rejected, and choose not to send it, but don't notice that if the client has asked for --atomic we are violating atomicity if all the other pushes we are sending would succeed. Asking the server end to uphold atomicity wouldn't work here as the server doesn't have any idea that we tried to update a ref that's broken. The added test-case is a succinct way to reproduce this issue that fails today. The same steps work fine when we aren't using a transport-helper to get to the upstream, i.e. when we've added a local repository as a remote: git remote add ~/upstream upstream Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11 21:19:19 +00:00
test_commit atomic1 &&
test_commit atomic2 &&
git branch collateral &&
remote-curl: pass on atomic capability to remote side When pushing more than one reference with the --atomic option, the server is supposed to perform a single atomic transaction to update the references, leaving them either all to succeed or all to fail. This works fine when pushing locally or over SSH, but when pushing over HTTP, we fail to pass the atomic capability to the remote side. In fact, we have not reported this capability to any remote helpers during the life of the feature. Now normally, things happen to work nevertheless, since we actually check for most types of failures, such as non-fast-forward updates, on the client side, and just abort the entire attempt. However, if the server side reports a problem, such as the inability to lock a ref, the transaction isn't atomic, because we haven't passed the appropriate capability over and the remote side has no way of knowing that we wanted atomic behavior. Fix this by passing the option from the transport code through to remote helpers, and from the HTTP remote helper down to send-pack. With this change, we can detect if the server side rejects the push and report back appropriately. Note the difference in the messages: the remote side reports "atomic transaction failed", while our own checking rejects pushes with the message "atomic push failed". Document the atomic option in the remote helper documentation, so other implementers can implement it if they like. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-16 23:45:34 +00:00
git branch other &&
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
git push "$up" atomic1 main collateral other &&
transport-helper: mark failure for atomic push Commit v2.22.0-1-g3bca1e7f9f (transport-helper: enforce atomic in push_refs_with_push, 2019-07-11) noticed the incomplete report of failure of an atomic push for HTTP protocol. But the implementation has a flaw that mark all remote references as failure. Only mark necessary references as failure in `push_refs_with_push()` of transport-helper. Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-17 09:45:35 +00:00
git tag -d atomic1 &&
transport-helper: enforce atomic in push_refs_with_push Teach transport-helper how to notice if skipping a ref during push would violate atomicity on the client side. We notice that a ref would be rejected, and choose not to send it, but don't notice that if the client has asked for --atomic we are violating atomicity if all the other pushes we are sending would succeed. Asking the server end to uphold atomicity wouldn't work here as the server doesn't have any idea that we tried to update a ref that's broken. The added test-case is a succinct way to reproduce this issue that fails today. The same steps work fine when we aren't using a transport-helper to get to the upstream, i.e. when we've added a local repository as a remote: git remote add ~/upstream upstream Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11 21:19:19 +00:00
# collateral is a valid push, but should be failed by atomic push
git checkout collateral &&
test_commit collateral1 &&
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
# Make main incompatible with upstream to provoke atomic
git checkout main &&
transport-helper: enforce atomic in push_refs_with_push Teach transport-helper how to notice if skipping a ref during push would violate atomicity on the client side. We notice that a ref would be rejected, and choose not to send it, but don't notice that if the client has asked for --atomic we are violating atomicity if all the other pushes we are sending would succeed. Asking the server end to uphold atomicity wouldn't work here as the server doesn't have any idea that we tried to update a ref that's broken. The added test-case is a succinct way to reproduce this issue that fails today. The same steps work fine when we aren't using a transport-helper to get to the upstream, i.e. when we've added a local repository as a remote: git remote add ~/upstream upstream Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11 21:19:19 +00:00
git reset --hard HEAD^ &&
# Add a new branch which should be failed by atomic push. This is a
# regression case.
git branch atomic &&
# --atomic should cause entire push to be rejected
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
test_must_fail git push --atomic "$up" main atomic collateral 2>output &&
transport-helper: enforce atomic in push_refs_with_push Teach transport-helper how to notice if skipping a ref during push would violate atomicity on the client side. We notice that a ref would be rejected, and choose not to send it, but don't notice that if the client has asked for --atomic we are violating atomicity if all the other pushes we are sending would succeed. Asking the server end to uphold atomicity wouldn't work here as the server doesn't have any idea that we tried to update a ref that's broken. The added test-case is a succinct way to reproduce this issue that fails today. The same steps work fine when we aren't using a transport-helper to get to the upstream, i.e. when we've added a local repository as a remote: git remote add ~/upstream upstream Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11 21:19:19 +00:00
# the new branch should not have been created upstream
test_must_fail git -C "$d" show-ref --verify refs/heads/atomic &&
# upstream should still reflect atomic2, the last thing we pushed
# successfully
git rev-parse atomic2 >expected &&
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
# on main...
git -C "$d" rev-parse refs/heads/main >actual &&
transport-helper: enforce atomic in push_refs_with_push Teach transport-helper how to notice if skipping a ref during push would violate atomicity on the client side. We notice that a ref would be rejected, and choose not to send it, but don't notice that if the client has asked for --atomic we are violating atomicity if all the other pushes we are sending would succeed. Asking the server end to uphold atomicity wouldn't work here as the server doesn't have any idea that we tried to update a ref that's broken. The added test-case is a succinct way to reproduce this issue that fails today. The same steps work fine when we aren't using a transport-helper to get to the upstream, i.e. when we've added a local repository as a remote: git remote add ~/upstream upstream Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11 21:19:19 +00:00
test_cmp expected actual &&
# ...and collateral.
git -C "$d" rev-parse refs/heads/collateral >actual &&
test_cmp expected actual &&
# the failed refs should be indicated to the user
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
grep "^ ! .*rejected.* main -> main" output &&
transport-helper: enforce atomic in push_refs_with_push Teach transport-helper how to notice if skipping a ref during push would violate atomicity on the client side. We notice that a ref would be rejected, and choose not to send it, but don't notice that if the client has asked for --atomic we are violating atomicity if all the other pushes we are sending would succeed. Asking the server end to uphold atomicity wouldn't work here as the server doesn't have any idea that we tried to update a ref that's broken. The added test-case is a succinct way to reproduce this issue that fails today. The same steps work fine when we aren't using a transport-helper to get to the upstream, i.e. when we've added a local repository as a remote: git remote add ~/upstream upstream Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11 21:19:19 +00:00
# the collateral failure refs should be indicated to the user
grep "^ ! .*rejected.* atomic -> atomic .*atomic push failed" output &&
transport-helper: mark failure for atomic push Commit v2.22.0-1-g3bca1e7f9f (transport-helper: enforce atomic in push_refs_with_push, 2019-07-11) noticed the incomplete report of failure of an atomic push for HTTP protocol. But the implementation has a flaw that mark all remote references as failure. Only mark necessary references as failure in `push_refs_with_push()` of transport-helper. Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-04-17 09:45:35 +00:00
grep "^ ! .*rejected.* collateral -> collateral .*atomic push failed" output &&
# never report what we do not push
! grep "^ ! .*rejected.* atomic1 " output &&
! grep "^ ! .*rejected.* other " output
transport-helper: enforce atomic in push_refs_with_push Teach transport-helper how to notice if skipping a ref during push would violate atomicity on the client side. We notice that a ref would be rejected, and choose not to send it, but don't notice that if the client has asked for --atomic we are violating atomicity if all the other pushes we are sending would succeed. Asking the server end to uphold atomicity wouldn't work here as the server doesn't have any idea that we tried to update a ref that's broken. The added test-case is a succinct way to reproduce this issue that fails today. The same steps work fine when we aren't using a transport-helper to get to the upstream, i.e. when we've added a local repository as a remote: git remote add ~/upstream upstream Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-07-11 21:19:19 +00:00
'
remote-curl: pass on atomic capability to remote side When pushing more than one reference with the --atomic option, the server is supposed to perform a single atomic transaction to update the references, leaving them either all to succeed or all to fail. This works fine when pushing locally or over SSH, but when pushing over HTTP, we fail to pass the atomic capability to the remote side. In fact, we have not reported this capability to any remote helpers during the life of the feature. Now normally, things happen to work nevertheless, since we actually check for most types of failures, such as non-fast-forward updates, on the client side, and just abort the entire attempt. However, if the server side reports a problem, such as the inability to lock a ref, the transaction isn't atomic, because we haven't passed the appropriate capability over and the remote side has no way of knowing that we wanted atomic behavior. Fix this by passing the option from the transport code through to remote helpers, and from the HTTP remote helper down to send-pack. With this change, we can detect if the server side rejects the push and report back appropriately. Note the difference in the messages: the remote side reports "atomic transaction failed", while our own checking rejects pushes with the message "atomic push failed". Document the atomic option in the remote helper documentation, so other implementers can implement it if they like. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-10-16 23:45:34 +00:00
test_expect_success 'push --atomic fails on server-side errors' '
# Use previously set up repository
d=$HTTPD_DOCUMENT_ROOT_PATH/atomic-branches.git &&
test_config -C "$d" http.receivepack true &&
up="$HTTPD_URL"/smart/atomic-branches.git &&
# break ref updates for other on the remote site
mkdir "$d/refs/heads/other.lock" &&
# add the new commit to other
git branch -f other collateral &&
# --atomic should cause entire push to be rejected
test_must_fail git push --atomic "$up" atomic other 2>output &&
# the new branch should not have been created upstream
test_must_fail git -C "$d" show-ref --verify refs/heads/atomic &&
# upstream should still reflect atomic2, the last thing we pushed
# successfully
git rev-parse atomic2 >expected &&
# ...to other.
git -C "$d" rev-parse refs/heads/other >actual &&
test_cmp expected actual &&
# the new branch should not have been created upstream
test_must_fail git -C "$d" show-ref --verify refs/heads/atomic &&
# the failed refs should be indicated to the user
grep "^ ! .*rejected.* other -> other .*atomic transaction failed" output &&
# the collateral failure refs should be indicated to the user
grep "^ ! .*rejected.* atomic -> atomic .*atomic transaction failed" output
'
remote-curl: don't pass back fake refs When receive-pack advertises its list of refs, it generally hides the capabilities information after a NUL at the end of the first ref. However, when we have an empty repository, there are no refs, and therefore receive-pack writes a fake ref "capabilities^{}" with the capabilities afterwards. On the client side, git reads the result with get_remote_heads(). We pick the capabilities from the end of the line, and then call check_ref() to make sure the ref name is valid. We see that it isn't, and don't bother adding it to our list of refs. However, the call to check_ref() is enabled by passing the REF_NORMAL flag to get_remote_heads. For the regular git transport, we pass REF_NORMAL in get_refs_via_connect() if we are doing a push (since only receive-pack uses this fake ref). But in remote-curl, we never use this flag, and we accept the fake ref as a real one, passing it back from the helper to the parent git-push. Most of the time this bug goes unnoticed, as the fake ref won't match our refspecs. However, if "--mirror" is used, then we see it as remote cruft to be pruned, and try to pass along a deletion refspec for it. Of course this refspec has bogus syntax (because of the ^{}), and the helper complains, aborting the push. Let's have remote-curl mirror what the builtin get_refs_via_connect() does (at least for the case of using git protocol; we can leave the dumb info/refs reader as it is). This also fixes pushing with --mirror to a smart-http remote that uses alternates. The fake ".have" refs the server gives to avoid unnecessary network transfer has a similar bad interactions with the machinery. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-17 10:45:39 +00:00
test_expect_success 'push --all can push to empty repo' '
d=$HTTPD_DOCUMENT_ROOT_PATH/empty-all.git &&
git init --bare "$d" &&
git --git-dir="$d" config http.receivepack true &&
git push --all "$HTTPD_URL"/smart/empty-all.git
'
test_expect_success 'push --mirror can push to empty repo' '
d=$HTTPD_DOCUMENT_ROOT_PATH/empty-mirror.git &&
git init --bare "$d" &&
git --git-dir="$d" config http.receivepack true &&
git push --mirror "$HTTPD_URL"/smart/empty-mirror.git
'
test_expect_success 'push --all to repo with alternates' '
s=$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git &&
d=$HTTPD_DOCUMENT_ROOT_PATH/alternates-all.git &&
git clone --bare --shared "$s" "$d" &&
git --git-dir="$d" config http.receivepack true &&
git --git-dir="$d" repack -adl &&
git push --all "$HTTPD_URL"/smart/alternates-all.git
'
test_expect_success 'push --mirror to repo with alternates' '
s=$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git &&
d=$HTTPD_DOCUMENT_ROOT_PATH/alternates-mirror.git &&
git clone --bare --shared "$s" "$d" &&
git --git-dir="$d" config http.receivepack true &&
git --git-dir="$d" repack -adl &&
git push --mirror "$HTTPD_URL"/smart/alternates-mirror.git
'
t5541: test more combinations of --progress Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 08:43:08 +00:00
test_expect_success TTY 'push shows progress when stderr is a tty' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit noisy &&
test_terminal git push >output 2>&1 &&
Revert "progress: use term_clear_line()" This reverts commit 5b12e3123b (progress: use term_clear_line(), 2019-06-24), because covering up the entire last line while refreshing the progress line caused unexpected problems during 'git clone/fetch/push': $ git clone ssh://localhost/home/szeder/src/tmp/linux.git/ Cloning into 'linux'... remote: remote: remote: remote: Enumerating objects: 999295 The length of the progress bar line can shorten when it includes throughput and the unit changes, or when its length exceeds the width of the terminal and is broken into two lines. In these cases the previously displayed longer progress line should be covered up, because otherwise the leftover characters from the previous progress line make the output look weird [1]. term_clear_line() makes this quite simple, as it covers up the entire last line either by using an ANSI control sequence or by printing a terminal width worth of space characters, depending on whether the terminal is smart or dumb. Unfortunately, when accessing a remote repository via any non-local protocol the remote 'git receive-pack/upload-pack' processes can't possibly have any idea about the local terminal (smart of dumb? how wide?) their progress will end up on. Consequently, they assume the worst, i.e. standard-width dumb terminal, and print 80 spaces to cover up the previously displayed progress line. The local 'git clone/fetch/push' processes then display the remote's progress, including these coverup spaces, with the 'remote: ' prefix, resulting in a total line length of 88 characters. If the local terminal is narrower than that, then the coverup gets line-wrapped, and after that the CR at the end doesn't return to the beginning of the progress line, but to the first column of its last line, resulting in those repeated 'remote: <many-spaces>' lines. By reverting 5b12e3123b (progress: use term_clear_line(), 2019-06-24) we won't cover up the entire last line, but go back to comparing the length of the current progress bar line with the previous one, and cover up as many characters as needed. [1] See commits 545dc345eb (progress: break too long progress bar lines, 2019-04-12) and 9f1fd84e15 (progress: clear previous progress update dynamically, 2019-04-12). Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-16 20:54:11 +00:00
test_i18ngrep "^Writing objects" output
t5541: test more combinations of --progress Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 08:43:08 +00:00
'
test_expect_success TTY 'push --quiet silences status and progress' '
fix push --quiet: add 'quiet' capability to receive-pack Currently, git push --quiet produces some non-error output, e.g.: $ git push --quiet Unpacking objects: 100% (3/3), done. This fixes a bug reported for the fedora git package: https://bugzilla.redhat.com/show_bug.cgi?id=725593 Reported-by: Jesse Keating <jkeating@redhat.com> Cc: Todd Zullinger <tmz@pobox.com> Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack) introduced the --quiet option to receive-pack and made send-pack pass that option. Older versions of receive-pack do not recognize the option, however, and terminate immediately. The commit was therefore reverted. This change instead adds a 'quiet' capability to receive-pack, which is a backwards compatible. In addition, this fixes push --quiet via http: A verbosity of 0 means quiet for remote helpers. Reported-by: Tobias Ulmer <tobiasu@tmux.org> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08 21:06:20 +00:00
cd "$ROOT_PATH"/test_repo_clone &&
test_commit quiet &&
t5541: test more combinations of --progress Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 08:43:08 +00:00
test_terminal git push --quiet >output 2>&1 &&
tests: use 'test_must_be_empty' instead of 'test_cmp /dev/null <out>' Using 'test_must_be_empty' is more idiomatic than 'test_cmp /dev/null out', and its message on error is perhaps a bit more to the point. This patch was basically created by running: sed -i -e 's%test_cmp /dev/null%test_must_be_empty%' t[0-9]*.sh with the exception of the change in 'should not fail in an empty repo' in 't7401-submodule-summary.sh', where it was 'test_cmp output /dev/null'. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-08-19 21:57:24 +00:00
test_must_be_empty output
fix push --quiet: add 'quiet' capability to receive-pack Currently, git push --quiet produces some non-error output, e.g.: $ git push --quiet Unpacking objects: 100% (3/3), done. This fixes a bug reported for the fedora git package: https://bugzilla.redhat.com/show_bug.cgi?id=725593 Reported-by: Jesse Keating <jkeating@redhat.com> Cc: Todd Zullinger <tmz@pobox.com> Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack) introduced the --quiet option to receive-pack and made send-pack pass that option. Older versions of receive-pack do not recognize the option, however, and terminate immediately. The commit was therefore reverted. This change instead adds a 'quiet' capability to receive-pack, which is a backwards compatible. In addition, this fixes push --quiet via http: A verbosity of 0 means quiet for remote helpers. Reported-by: Tobias Ulmer <tobiasu@tmux.org> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08 21:06:20 +00:00
'
t5541: test more combinations of --progress Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 08:43:08 +00:00
test_expect_success TTY 'push --no-progress silences progress but not status' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit no-progress &&
test_terminal git push --no-progress >output 2>&1 &&
t5541: become resilient to GETTEXT_POISON Use test_i18n* functions for testing text already marked for translation. Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 16:49:18 +00:00
test_i18ngrep "^To http" output &&
Revert "progress: use term_clear_line()" This reverts commit 5b12e3123b (progress: use term_clear_line(), 2019-06-24), because covering up the entire last line while refreshing the progress line caused unexpected problems during 'git clone/fetch/push': $ git clone ssh://localhost/home/szeder/src/tmp/linux.git/ Cloning into 'linux'... remote: remote: remote: remote: Enumerating objects: 999295 The length of the progress bar line can shorten when it includes throughput and the unit changes, or when its length exceeds the width of the terminal and is broken into two lines. In these cases the previously displayed longer progress line should be covered up, because otherwise the leftover characters from the previous progress line make the output look weird [1]. term_clear_line() makes this quite simple, as it covers up the entire last line either by using an ANSI control sequence or by printing a terminal width worth of space characters, depending on whether the terminal is smart or dumb. Unfortunately, when accessing a remote repository via any non-local protocol the remote 'git receive-pack/upload-pack' processes can't possibly have any idea about the local terminal (smart of dumb? how wide?) their progress will end up on. Consequently, they assume the worst, i.e. standard-width dumb terminal, and print 80 spaces to cover up the previously displayed progress line. The local 'git clone/fetch/push' processes then display the remote's progress, including these coverup spaces, with the 'remote: ' prefix, resulting in a total line length of 88 characters. If the local terminal is narrower than that, then the coverup gets line-wrapped, and after that the CR at the end doesn't return to the beginning of the progress line, but to the first column of its last line, resulting in those repeated 'remote: <many-spaces>' lines. By reverting 5b12e3123b (progress: use term_clear_line(), 2019-06-24) we won't cover up the entire last line, but go back to comparing the length of the current progress bar line with the previous one, and cover up as many characters as needed. [1] See commits 545dc345eb (progress: break too long progress bar lines, 2019-04-12) and 9f1fd84e15 (progress: clear previous progress update dynamically, 2019-04-12). Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-16 20:54:11 +00:00
test_i18ngrep ! "^Writing objects" output
t5541: test more combinations of --progress Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 08:43:08 +00:00
'
test_expect_success 'push --progress shows progress to non-tty' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit progress &&
git push --progress >output 2>&1 &&
t5541: become resilient to GETTEXT_POISON Use test_i18n* functions for testing text already marked for translation. Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-06-30 16:49:18 +00:00
test_i18ngrep "^To http" output &&
Revert "progress: use term_clear_line()" This reverts commit 5b12e3123b (progress: use term_clear_line(), 2019-06-24), because covering up the entire last line while refreshing the progress line caused unexpected problems during 'git clone/fetch/push': $ git clone ssh://localhost/home/szeder/src/tmp/linux.git/ Cloning into 'linux'... remote: remote: remote: remote: Enumerating objects: 999295 The length of the progress bar line can shorten when it includes throughput and the unit changes, or when its length exceeds the width of the terminal and is broken into two lines. In these cases the previously displayed longer progress line should be covered up, because otherwise the leftover characters from the previous progress line make the output look weird [1]. term_clear_line() makes this quite simple, as it covers up the entire last line either by using an ANSI control sequence or by printing a terminal width worth of space characters, depending on whether the terminal is smart or dumb. Unfortunately, when accessing a remote repository via any non-local protocol the remote 'git receive-pack/upload-pack' processes can't possibly have any idea about the local terminal (smart of dumb? how wide?) their progress will end up on. Consequently, they assume the worst, i.e. standard-width dumb terminal, and print 80 spaces to cover up the previously displayed progress line. The local 'git clone/fetch/push' processes then display the remote's progress, including these coverup spaces, with the 'remote: ' prefix, resulting in a total line length of 88 characters. If the local terminal is narrower than that, then the coverup gets line-wrapped, and after that the CR at the end doesn't return to the beginning of the progress line, but to the first column of its last line, resulting in those repeated 'remote: <many-spaces>' lines. By reverting 5b12e3123b (progress: use term_clear_line(), 2019-06-24) we won't cover up the entire last line, but go back to comparing the length of the current progress bar line with the previous one, and cover up as many characters as needed. [1] See commits 545dc345eb (progress: break too long progress bar lines, 2019-04-12) and 9f1fd84e15 (progress: clear previous progress update dynamically, 2019-04-12). Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-16 20:54:11 +00:00
test_i18ngrep "^Writing objects" output
t5541: test more combinations of --progress Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 08:43:08 +00:00
'
http-backend: respect existing GIT_COMMITTER_* variables The http-backend program sets default GIT_COMMITTER_NAME and GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and REMOTE_ADDR variables provided by the webserver. However, it unconditionally overwrites any existing GIT_COMMITTER variables, which may have been customized by site-specific code in the webserver (or in a script wrapping http-backend). Let's leave those variables intact if they already exist, assuming that any such configuration was intentional. There is a slight chance of a regression if somebody has set GIT_COMMITTER_* for the entire webserver, not intending it to leak through http-backend. We could protect against this by passing the information in alternate variables. However, it seems unlikely that anyone will care about that regression, and there is value in the simplicity of using the common variable names that are used elsewhere in git. While we're tweaking the environment-handling in http-backend, let's switch it to use argv_array to handle the list of variables. That makes the memory management much simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-30 07:01:30 +00:00
test_expect_success 'http push gives sane defaults to reflog' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit reflog-test &&
git push "$HTTPD_URL"/smart/test_repo.git &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \
log -g -1 --format="%gn <%ge>" >actual &&
echo "anonymous <anonymous@http.127.0.0.1>" >expect &&
test_cmp expect actual
'
test_expect_success 'http push respects GIT_COMMITTER_* in reflog' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit custom-reflog-test &&
git push "$HTTPD_URL"/smart_custom_env/test_repo.git &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \
log -g -1 --format="%gn <%ge>" >actual &&
echo "Custom User <custom@example.com>" >expect &&
test_cmp expect actual
'
t: test basic smart-http authentication We do not currently test authentication over smart-http at all. In theory, it should work exactly as it does for dumb http (which we do test). It does indeed work for these simple tests, but this patch lays the groundwork for more complex tests in future patches. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 13:25:36 +00:00
test_expect_success 'push over smart http with auth' '
cd "$ROOT_PATH/test_repo_clone" &&
echo push-auth-test >expect &&
test_commit push-auth-test &&
use distinct username/password for http auth tests The httpd server we set up to test git's http client code knows about a single account, in which both the username and password are "user@host" (the unusual use of the "@" here is to verify that we handle the character correctly when URL escaped). This means that we may miss a certain class of errors in which the username and password are mixed up internally by git. We can make our tests more robust by having distinct values for the username and password. In addition to tweaking the server passwd file and the client URL, we must teach the "askpass" harness to accept multiple values. As a bonus, this makes the setup of some tests more obvious; when we are expecting git to ask only about the password, we can seed the username askpass response with a bogus value. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-02 07:38:35 +00:00
set_askpass user@host pass@host &&
t: test basic smart-http authentication We do not currently test authentication over smart-http at all. In theory, it should work exactly as it does for dumb http (which we do test). It does indeed work for these simple tests, but this patch lays the groundwork for more complex tests in future patches. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 13:25:36 +00:00
git push "$HTTPD_URL"/auth/smart/test_repo.git &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \
log -1 --format=%s >actual &&
expect_askpass both user@host &&
test_cmp expect actual
'
http: prompt for credentials on failed POST All of the smart-http GET requests go through the http_get_* functions, which will prompt for credentials and retry if we see an HTTP 401. POST requests, however, do not go through any central point. Moreover, it is difficult to retry in the general case; we cannot assume the request body fits in memory or is even seekable, and we don't know how much of it was consumed during the attempt. Most of the time, this is not a big deal; for both fetching and pushing, we make a GET request before doing any POSTs, so typically we figure out the credentials during the first request, then reuse them during the POST. However, some servers may allow a client to get the list of refs from receive-pack without authentication, and then require authentication when the client actually tries to POST the pack. This is not ideal, as the client may do a non-trivial amount of work to generate the pack (e.g., delta-compressing objects). However, for a long time it has been the recommended example configuration in git-http-backend(1) for setting up a repository with anonymous fetch and authenticated push. This setup has always been broken without putting a username into the URL. Prior to commit 986bbc0, it did work with a username in the URL, because git would prompt for credentials before making any requests at all. However, post-986bbc0, it is totally broken. Since it has been advertised in the manpage for some time, we should make sure it works. Unfortunately, it is not as easy as simply calling post_rpc again when it fails, due to the input issue mentioned above. However, we can still make this specific case work by retrying in two specific instances: 1. If the request is large (bigger than LARGE_PACKET_MAX), we will first send a probe request with a single flush packet. Since this request is static, we can freely retry it. 2. If the request is small and we are not using gzip, then we have the whole thing in-core, and we can freely retry. That means we will not retry in some instances, including: 1. If we are using gzip. However, we only do so when calling git-upload-pack, so it does not apply to pushes. 2. If we have a large request, the probe succeeds, but then the real POST wants authentication. This is an extremely unlikely configuration and not worth worrying about. While it might be nice to cover those instances, doing so would be significantly more complex for very little real-world gain. In the long run, we will be much better off when curl learns to internally handle authentication as a callback, and we can cleanly handle all cases that way. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 13:27:15 +00:00
test_expect_success 'push to auth-only-for-push repo' '
t: test http access to "half-auth" repositories Some sites set up http access to repositories such that fetching is anonymous and unauthenticated, but pushing is authenticated. While there are multiple ways to do this, the technique advertised in the git-http-backend manpage is to block access to locations matching "/git-receive-pack$". Let's emulate that advice in our test setup, which makes it clear that this advice does not actually work. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 13:25:53 +00:00
cd "$ROOT_PATH/test_repo_clone" &&
echo push-half-auth >expect &&
test_commit push-half-auth &&
use distinct username/password for http auth tests The httpd server we set up to test git's http client code knows about a single account, in which both the username and password are "user@host" (the unusual use of the "@" here is to verify that we handle the character correctly when URL escaped). This means that we may miss a certain class of errors in which the username and password are mixed up internally by git. We can make our tests more robust by having distinct values for the username and password. In addition to tweaking the server passwd file and the client URL, we must teach the "askpass" harness to accept multiple values. As a bonus, this makes the setup of some tests more obvious; when we are expecting git to ask only about the password, we can seed the username askpass response with a bogus value. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-02 07:38:35 +00:00
set_askpass user@host pass@host &&
t: test http access to "half-auth" repositories Some sites set up http access to repositories such that fetching is anonymous and unauthenticated, but pushing is authenticated. While there are multiple ways to do this, the technique advertised in the git-http-backend manpage is to block access to locations matching "/git-receive-pack$". Let's emulate that advice in our test setup, which makes it clear that this advice does not actually work. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 13:25:53 +00:00
git push "$HTTPD_URL"/auth-push/smart/test_repo.git &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \
log -1 --format=%s >actual &&
expect_askpass both user@host &&
test_cmp expect actual
'
doc/http-backend: match query-string in apache half-auth example When setting up a "half-auth" repository in which reads can be done anonymously but writes require authentication, it is best if the server can require authentication for both the ref advertisement and the actual receive-pack POSTs. This alleviates the need for the admin to set http.receivepack in the repositories, and means that the client is challenged for credentials immediately, instead of partway through the push process (and git clients older than v1.7.11.7 had trouble handling these challenges). Since detecting a push during the ref advertisement requires matching the query string, and this is non-trivial to do in Apache, we have traditionally punted and instructed users to just protect "/git-receive-pack$". This patch provides the mod_rewrite recipe to actually match the ref advertisement, which is preferred. While we're at it, let's add the recipe to our test scripts so that we can be sure that it works, and doesn't get broken (either by our changes or by changes in Apache). Signed-off-by: Jeff King <peff@peff.net> Acked-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-13 03:33:36 +00:00
test_expect_success 'create repo without http.receivepack set' '
cd "$ROOT_PATH" &&
git init half-auth &&
(
cd half-auth &&
test_commit one
) &&
git clone --bare half-auth "$HTTPD_DOCUMENT_ROOT_PATH/half-auth.git"
'
test_expect_success 'clone via half-auth-complete does not need password' '
cd "$ROOT_PATH" &&
set_askpass wrong &&
git clone "$HTTPD_URL"/half-auth-complete/smart/half-auth.git \
half-auth-clone &&
expect_askpass none
'
test_expect_success 'push into half-auth-complete requires password' '
cd "$ROOT_PATH/half-auth-clone" &&
echo two >expect &&
test_commit two &&
use distinct username/password for http auth tests The httpd server we set up to test git's http client code knows about a single account, in which both the username and password are "user@host" (the unusual use of the "@" here is to verify that we handle the character correctly when URL escaped). This means that we may miss a certain class of errors in which the username and password are mixed up internally by git. We can make our tests more robust by having distinct values for the username and password. In addition to tweaking the server passwd file and the client URL, we must teach the "askpass" harness to accept multiple values. As a bonus, this makes the setup of some tests more obvious; when we are expecting git to ask only about the password, we can seed the username askpass response with a bogus value. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-01-02 07:38:35 +00:00
set_askpass user@host pass@host &&
doc/http-backend: match query-string in apache half-auth example When setting up a "half-auth" repository in which reads can be done anonymously but writes require authentication, it is best if the server can require authentication for both the ref advertisement and the actual receive-pack POSTs. This alleviates the need for the admin to set http.receivepack in the repositories, and means that the client is challenged for credentials immediately, instead of partway through the push process (and git clients older than v1.7.11.7 had trouble handling these challenges). Since detecting a push during the ref advertisement requires matching the query string, and this is non-trivial to do in Apache, we have traditionally punted and instructed users to just protect "/git-receive-pack$". This patch provides the mod_rewrite recipe to actually match the ref advertisement, which is preferred. While we're at it, let's add the recipe to our test scripts so that we can be sure that it works, and doesn't get broken (either by our changes or by changes in Apache). Signed-off-by: Jeff King <peff@peff.net> Acked-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-13 03:33:36 +00:00
git push "$HTTPD_URL/half-auth-complete/smart/half-auth.git" &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/half-auth.git" \
log -1 --format=%s >actual &&
expect_askpass both user@host &&
test_cmp expect actual
'
send-pack: take refspecs over stdin Pushing a large number of refs works over most transports, because we implement send-pack as an internal function. However, it can sometimes fail when pushing over http, because we have to spawn "git send-pack --stateless-rpc" to do the heavy lifting, and we pass each refspec on the command line. This can cause us to overflow the OS limits on the size of the command line for a large push. We can solve this by giving send-pack a --stdin option and using it from remote-curl. We already dealt with this on the fetch-pack side in 078b895 (fetch-pack: new --stdin option to read refs from stdin, 2012-04-02). The stdin option (and in particular, its use of packet-lines for stateless-rpc input) is modeled after that solution. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-21 12:21:20 +00:00
test_expect_success CMDLINE_LIMIT 'push 2000 tags over http' '
sha1=$(git rev-parse HEAD) &&
test_seq 2000 |
sort |
sed "s|.*|$sha1 refs/tags/really-long-tag-name-&|" \
>.git/packed-refs &&
run_with_limited_cmdline git push --mirror
'
signed push: teach smart-HTTP to pass "git push --signed" around The "--signed" option received by "git push" is first passed to the transport layer, which the native transport directly uses to notice that a push certificate needs to be sent. When the transport-helper is involved, however, the option needs to be told to the helper with set_helper_option(), and the helper needs to take necessary action. For the smart-HTTP helper, the "necessary action" involves spawning the "git send-pack" subprocess with the "--signed" option. Once the above all gets wired in, the smart-HTTP transport now can use the push certificate mechanism to authenticate its pushes. Add a test that is modeled after tests for the native transport in t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test Apache configuration to pass GNUPGHOME environment variable through. As PassEnv would trigger warnings for an environment variable that is not set, export it from test-lib.sh set to a harmless value when GnuPG is not being used in the tests. Note that the added test is deliberately loose and does not check the nonce in this step. This is because the stateless RPC mode is inevitably flaky and a nonce that comes back in the actual push processing is one issued by a different process; if the two interactions with the server crossed a second boundary, the nonces will not match and such a check will fail. A later patch in the series will work around this shortcoming. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-15 21:59:00 +00:00
test_expect_success GPG 'push with post-receive to inspect certificate' '
http tests: use "test_hook" for "smart" and "dumb" http tests Change the http tests to use "test_hook" insteadd of "write_script". In both cases we can get rid of sub-shelling. For "t/t5550-http-fetch-dumb.sh" add a trivial helper which sets up the hook and calls "update-server-info". Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-03-17 10:13:18 +00:00
test_hook -C "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git post-receive <<-\EOF &&
signed push: teach smart-HTTP to pass "git push --signed" around The "--signed" option received by "git push" is first passed to the transport layer, which the native transport directly uses to notice that a push certificate needs to be sent. When the transport-helper is involved, however, the option needs to be told to the helper with set_helper_option(), and the helper needs to take necessary action. For the smart-HTTP helper, the "necessary action" involves spawning the "git send-pack" subprocess with the "--signed" option. Once the above all gets wired in, the smart-HTTP transport now can use the push certificate mechanism to authenticate its pushes. Add a test that is modeled after tests for the native transport in t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test Apache configuration to pass GNUPGHOME environment variable through. As PassEnv would trigger warnings for an environment variable that is not set, export it from test-lib.sh set to a harmless value when GnuPG is not being used in the tests. Note that the added test is deliberately loose and does not check the nonce in this step. This is because the stateless RPC mode is inevitably flaky and a nonce that comes back in the actual push processing is one issued by a different process; if the two interactions with the server crossed a second boundary, the nonces will not match and such a check will fail. A later patch in the series will work around this shortcoming. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-15 21:59:00 +00:00
# discard the update list
cat >/dev/null
# record the push certificate
if test -n "${GIT_PUSH_CERT-}"
then
git cat-file blob $GIT_PUSH_CERT >../push-cert
fi &&
cat >../push-cert-status <<E_O_F
SIGNER=${GIT_PUSH_CERT_SIGNER-nobody}
KEY=${GIT_PUSH_CERT_KEY-nokey}
STATUS=${GIT_PUSH_CERT_STATUS-nostatus}
signed push: allow stale nonce in stateless mode When operating with the stateless RPC mode, we will receive a nonce issued by another instance of us that advertised our capability and refs some time ago. Update the logic to check received nonce to detect this case, compute how much time has passed since the nonce was issued and report the status with a new environment variable GIT_PUSH_CERT_NONCE_SLOP to the hooks. GIT_PUSH_CERT_NONCE_STATUS will report "SLOP" in such a case. The hooks are free to decide how large a slop it is willing to accept. Strictly speaking, the "nonce" is not really a "nonce" anymore in the stateless RPC mode, as it will happily take any "nonce" issued by it (which is protected by HMAC and its secret key) as long as it is fresh enough. The degree of this security degradation, relative to the native protocol, is about the same as the "we make sure that the 'git push' decided to update our refs with new objects based on the freshest observation of our refs by making sure the values they claim the original value of the refs they ask us to update exactly match the current state" security is loosened to accomodate the stateless RPC mode in the existing code without this series, so there is no need for those who are already using smart HTTP to push to their repositories to be alarmed any more than they already are. In addition, the server operator can set receive.certnonceslop configuration variable to specify how stale a nonce can be (in seconds). When this variable is set, and if the nonce received in the certificate that passes the HMAC check was less than that many seconds old, hooks are given "OK" in GIT_PUSH_CERT_NONCE_STATUS (instead of "SLOP") and the received nonce value is given in GIT_PUSH_CERT_NONCE, which makes it easier for a simple-minded hook to check if the certificate we received is recent enough. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-05 17:46:04 +00:00
NONCE_STATUS=${GIT_PUSH_CERT_NONCE_STATUS-nononcestatus}
NONCE=${GIT_PUSH_CERT_NONCE-nononce}
signed push: teach smart-HTTP to pass "git push --signed" around The "--signed" option received by "git push" is first passed to the transport layer, which the native transport directly uses to notice that a push certificate needs to be sent. When the transport-helper is involved, however, the option needs to be told to the helper with set_helper_option(), and the helper needs to take necessary action. For the smart-HTTP helper, the "necessary action" involves spawning the "git send-pack" subprocess with the "--signed" option. Once the above all gets wired in, the smart-HTTP transport now can use the push certificate mechanism to authenticate its pushes. Add a test that is modeled after tests for the native transport in t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test Apache configuration to pass GNUPGHOME environment variable through. As PassEnv would trigger warnings for an environment variable that is not set, export it from test-lib.sh set to a harmless value when GnuPG is not being used in the tests. Note that the added test is deliberately loose and does not check the nonce in this step. This is because the stateless RPC mode is inevitably flaky and a nonce that comes back in the actual push processing is one issued by a different process; if the two interactions with the server crossed a second boundary, the nonces will not match and such a check will fail. A later patch in the series will work around this shortcoming. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-15 21:59:00 +00:00
E_O_F
http tests: use "test_hook" for "smart" and "dumb" http tests Change the http tests to use "test_hook" insteadd of "write_script". In both cases we can get rid of sub-shelling. For "t/t5550-http-fetch-dumb.sh" add a trivial helper which sets up the hook and calls "update-server-info". Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-03-17 10:13:18 +00:00
EOF
(
cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git &&
signed push: allow stale nonce in stateless mode When operating with the stateless RPC mode, we will receive a nonce issued by another instance of us that advertised our capability and refs some time ago. Update the logic to check received nonce to detect this case, compute how much time has passed since the nonce was issued and report the status with a new environment variable GIT_PUSH_CERT_NONCE_SLOP to the hooks. GIT_PUSH_CERT_NONCE_STATUS will report "SLOP" in such a case. The hooks are free to decide how large a slop it is willing to accept. Strictly speaking, the "nonce" is not really a "nonce" anymore in the stateless RPC mode, as it will happily take any "nonce" issued by it (which is protected by HMAC and its secret key) as long as it is fresh enough. The degree of this security degradation, relative to the native protocol, is about the same as the "we make sure that the 'git push' decided to update our refs with new objects based on the freshest observation of our refs by making sure the values they claim the original value of the refs they ask us to update exactly match the current state" security is loosened to accomodate the stateless RPC mode in the existing code without this series, so there is no need for those who are already using smart HTTP to push to their repositories to be alarmed any more than they already are. In addition, the server operator can set receive.certnonceslop configuration variable to specify how stale a nonce can be (in seconds). When this variable is set, and if the nonce received in the certificate that passes the HMAC check was less than that many seconds old, hooks are given "OK" in GIT_PUSH_CERT_NONCE_STATUS (instead of "SLOP") and the received nonce value is given in GIT_PUSH_CERT_NONCE, which makes it easier for a simple-minded hook to check if the certificate we received is recent enough. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-05 17:46:04 +00:00
git config receive.certnonceseed sekrit &&
git config receive.certnonceslop 30
signed push: teach smart-HTTP to pass "git push --signed" around The "--signed" option received by "git push" is first passed to the transport layer, which the native transport directly uses to notice that a push certificate needs to be sent. When the transport-helper is involved, however, the option needs to be told to the helper with set_helper_option(), and the helper needs to take necessary action. For the smart-HTTP helper, the "necessary action" involves spawning the "git send-pack" subprocess with the "--signed" option. Once the above all gets wired in, the smart-HTTP transport now can use the push certificate mechanism to authenticate its pushes. Add a test that is modeled after tests for the native transport in t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test Apache configuration to pass GNUPGHOME environment variable through. As PassEnv would trigger warnings for an environment variable that is not set, export it from test-lib.sh set to a harmless value when GnuPG is not being used in the tests. Note that the added test is deliberately loose and does not check the nonce in this step. This is because the stateless RPC mode is inevitably flaky and a nonce that comes back in the actual push processing is one issued by a different process; if the two interactions with the server crossed a second boundary, the nonces will not match and such a check will fail. A later patch in the series will work around this shortcoming. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-15 21:59:00 +00:00
) &&
cd "$ROOT_PATH/test_repo_clone" &&
test_commit cert-test &&
git push --signed "$HTTPD_URL/smart/test_repo.git" &&
(
cd "$HTTPD_DOCUMENT_ROOT_PATH" &&
signed push: allow stale nonce in stateless mode When operating with the stateless RPC mode, we will receive a nonce issued by another instance of us that advertised our capability and refs some time ago. Update the logic to check received nonce to detect this case, compute how much time has passed since the nonce was issued and report the status with a new environment variable GIT_PUSH_CERT_NONCE_SLOP to the hooks. GIT_PUSH_CERT_NONCE_STATUS will report "SLOP" in such a case. The hooks are free to decide how large a slop it is willing to accept. Strictly speaking, the "nonce" is not really a "nonce" anymore in the stateless RPC mode, as it will happily take any "nonce" issued by it (which is protected by HMAC and its secret key) as long as it is fresh enough. The degree of this security degradation, relative to the native protocol, is about the same as the "we make sure that the 'git push' decided to update our refs with new objects based on the freshest observation of our refs by making sure the values they claim the original value of the refs they ask us to update exactly match the current state" security is loosened to accomodate the stateless RPC mode in the existing code without this series, so there is no need for those who are already using smart HTTP to push to their repositories to be alarmed any more than they already are. In addition, the server operator can set receive.certnonceslop configuration variable to specify how stale a nonce can be (in seconds). When this variable is set, and if the nonce received in the certificate that passes the HMAC check was less than that many seconds old, hooks are given "OK" in GIT_PUSH_CERT_NONCE_STATUS (instead of "SLOP") and the received nonce value is given in GIT_PUSH_CERT_NONCE, which makes it easier for a simple-minded hook to check if the certificate we received is recent enough. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-05 17:46:04 +00:00
cat <<-\EOF &&
signed push: teach smart-HTTP to pass "git push --signed" around The "--signed" option received by "git push" is first passed to the transport layer, which the native transport directly uses to notice that a push certificate needs to be sent. When the transport-helper is involved, however, the option needs to be told to the helper with set_helper_option(), and the helper needs to take necessary action. For the smart-HTTP helper, the "necessary action" involves spawning the "git send-pack" subprocess with the "--signed" option. Once the above all gets wired in, the smart-HTTP transport now can use the push certificate mechanism to authenticate its pushes. Add a test that is modeled after tests for the native transport in t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test Apache configuration to pass GNUPGHOME environment variable through. As PassEnv would trigger warnings for an environment variable that is not set, export it from test-lib.sh set to a harmless value when GnuPG is not being used in the tests. Note that the added test is deliberately loose and does not check the nonce in this step. This is because the stateless RPC mode is inevitably flaky and a nonce that comes back in the actual push processing is one issued by a different process; if the two interactions with the server crossed a second boundary, the nonces will not match and such a check will fail. A later patch in the series will work around this shortcoming. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-15 21:59:00 +00:00
SIGNER=C O Mitter <committer@example.com>
KEY=13B6F51ECDDE430D
STATUS=G
signed push: allow stale nonce in stateless mode When operating with the stateless RPC mode, we will receive a nonce issued by another instance of us that advertised our capability and refs some time ago. Update the logic to check received nonce to detect this case, compute how much time has passed since the nonce was issued and report the status with a new environment variable GIT_PUSH_CERT_NONCE_SLOP to the hooks. GIT_PUSH_CERT_NONCE_STATUS will report "SLOP" in such a case. The hooks are free to decide how large a slop it is willing to accept. Strictly speaking, the "nonce" is not really a "nonce" anymore in the stateless RPC mode, as it will happily take any "nonce" issued by it (which is protected by HMAC and its secret key) as long as it is fresh enough. The degree of this security degradation, relative to the native protocol, is about the same as the "we make sure that the 'git push' decided to update our refs with new objects based on the freshest observation of our refs by making sure the values they claim the original value of the refs they ask us to update exactly match the current state" security is loosened to accomodate the stateless RPC mode in the existing code without this series, so there is no need for those who are already using smart HTTP to push to their repositories to be alarmed any more than they already are. In addition, the server operator can set receive.certnonceslop configuration variable to specify how stale a nonce can be (in seconds). When this variable is set, and if the nonce received in the certificate that passes the HMAC check was less than that many seconds old, hooks are given "OK" in GIT_PUSH_CERT_NONCE_STATUS (instead of "SLOP") and the received nonce value is given in GIT_PUSH_CERT_NONCE, which makes it easier for a simple-minded hook to check if the certificate we received is recent enough. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-05 17:46:04 +00:00
NONCE_STATUS=OK
signed push: teach smart-HTTP to pass "git push --signed" around The "--signed" option received by "git push" is first passed to the transport layer, which the native transport directly uses to notice that a push certificate needs to be sent. When the transport-helper is involved, however, the option needs to be told to the helper with set_helper_option(), and the helper needs to take necessary action. For the smart-HTTP helper, the "necessary action" involves spawning the "git send-pack" subprocess with the "--signed" option. Once the above all gets wired in, the smart-HTTP transport now can use the push certificate mechanism to authenticate its pushes. Add a test that is modeled after tests for the native transport in t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test Apache configuration to pass GNUPGHOME environment variable through. As PassEnv would trigger warnings for an environment variable that is not set, export it from test-lib.sh set to a harmless value when GnuPG is not being used in the tests. Note that the added test is deliberately loose and does not check the nonce in this step. This is because the stateless RPC mode is inevitably flaky and a nonce that comes back in the actual push processing is one issued by a different process; if the two interactions with the server crossed a second boundary, the nonces will not match and such a check will fail. A later patch in the series will work around this shortcoming. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-15 21:59:00 +00:00
EOF
signed push: allow stale nonce in stateless mode When operating with the stateless RPC mode, we will receive a nonce issued by another instance of us that advertised our capability and refs some time ago. Update the logic to check received nonce to detect this case, compute how much time has passed since the nonce was issued and report the status with a new environment variable GIT_PUSH_CERT_NONCE_SLOP to the hooks. GIT_PUSH_CERT_NONCE_STATUS will report "SLOP" in such a case. The hooks are free to decide how large a slop it is willing to accept. Strictly speaking, the "nonce" is not really a "nonce" anymore in the stateless RPC mode, as it will happily take any "nonce" issued by it (which is protected by HMAC and its secret key) as long as it is fresh enough. The degree of this security degradation, relative to the native protocol, is about the same as the "we make sure that the 'git push' decided to update our refs with new objects based on the freshest observation of our refs by making sure the values they claim the original value of the refs they ask us to update exactly match the current state" security is loosened to accomodate the stateless RPC mode in the existing code without this series, so there is no need for those who are already using smart HTTP to push to their repositories to be alarmed any more than they already are. In addition, the server operator can set receive.certnonceslop configuration variable to specify how stale a nonce can be (in seconds). When this variable is set, and if the nonce received in the certificate that passes the HMAC check was less than that many seconds old, hooks are given "OK" in GIT_PUSH_CERT_NONCE_STATUS (instead of "SLOP") and the received nonce value is given in GIT_PUSH_CERT_NONCE, which makes it easier for a simple-minded hook to check if the certificate we received is recent enough. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-05 17:46:04 +00:00
sed -n -e "s/^nonce /NONCE=/p" -e "/^$/q" push-cert
signed push: teach smart-HTTP to pass "git push --signed" around The "--signed" option received by "git push" is first passed to the transport layer, which the native transport directly uses to notice that a push certificate needs to be sent. When the transport-helper is involved, however, the option needs to be told to the helper with set_helper_option(), and the helper needs to take necessary action. For the smart-HTTP helper, the "necessary action" involves spawning the "git send-pack" subprocess with the "--signed" option. Once the above all gets wired in, the smart-HTTP transport now can use the push certificate mechanism to authenticate its pushes. Add a test that is modeled after tests for the native transport in t5534-push-signed.sh to t5541-http-push-smart.sh. Update the test Apache configuration to pass GNUPGHOME environment variable through. As PassEnv would trigger warnings for an environment variable that is not set, export it from test-lib.sh set to a harmless value when GnuPG is not being used in the tests. Note that the added test is deliberately loose and does not check the nonce in this step. This is because the stateless RPC mode is inevitably flaky and a nonce that comes back in the actual push processing is one issued by a different process; if the two interactions with the server crossed a second boundary, the nonces will not match and such a check will fail. A later patch in the series will work around this shortcoming. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-09-15 21:59:00 +00:00
) >expect &&
test_cmp expect "$HTTPD_DOCUMENT_ROOT_PATH/push-cert-status"
'
push: anonymize URL in status output Commit 47abd85 (fetch: Strip usernames from url's before storing them, 2009-04-17) taught fetch to anonymize URLs. The primary purpose there was to avoid sticking passwords in merge-commit messages, but as a side effect, we also avoid printing them to stderr. The push side does not have the merge-commit problem, but it probably should avoid printing them to stderr. We can reuse the same anonymizing function. Note that for this to come up, the credentials would have to appear either on the command line or in a git config file, neither of which is particularly secure. So people _should_ be switching to using credential helpers instead, which makes this problem go away. But that's no excuse not to improve the situation for people who for whatever reason end up using credentials embedded in the URL. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-13 23:36:53 +00:00
test_expect_success 'push status output scrubs password' '
t5541: fix url scrubbing test when GPG is not set When the GPG prereq is not set, we do not run test 34. That test changes the directory of the test script as a side effect (something we usually frown on, but which matches the style of the rest of this script). When test 35 (the url-scrubbing test) runs, it expects to be in the directory from test 34. If it's not, the test fails; we are in a different sub-repo, our test-commit is built on a different history, and the push becomes a non-fast-forward. We can fix this by unconditionally moving to the directory we expect (again, against our usual style but matching how the rest of the script operates). As an additional protection, let's also switch from "make a new commit and push to master" to just "push to a new branch". We don't care about the branch name; we just want _some_ ref update to trigger the status output. Pushing to a new branch is less likely to run into problems with force-updates, changing the checked-out branch, etc. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-20 11:32:26 +00:00
cd "$ROOT_PATH/test_repo_clone" &&
git push --porcelain \
"$HTTPD_URL_USER_PASS/smart/test_repo.git" \
+HEAD:scrub >status &&
push: anonymize URL in status output Commit 47abd85 (fetch: Strip usernames from url's before storing them, 2009-04-17) taught fetch to anonymize URLs. The primary purpose there was to avoid sticking passwords in merge-commit messages, but as a side effect, we also avoid printing them to stderr. The push side does not have the merge-commit problem, but it probably should avoid printing them to stderr. We can reuse the same anonymizing function. Note that for this to come up, the credentials would have to appear either on the command line or in a git config file, neither of which is particularly secure. So people _should_ be switching to using credential helpers instead, which makes this problem go away. But that's no excuse not to improve the situation for people who for whatever reason end up using credentials embedded in the URL. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-13 23:36:53 +00:00
# should have been scrubbed down to vanilla URL
grep "^To $HTTPD_URL/smart/test_repo.git" status
'
clone/fetch: anonymize URLs in the reflog Even if we strongly discourage putting credentials into the URLs passed via the command-line, there _is_ support for that, and users _do_ do that. Let's scrub them before writing them to the reflog. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-04 20:08:29 +00:00
test_expect_success 'clone/fetch scrubs password from reflogs' '
cd "$ROOT_PATH" &&
git clone "$HTTPD_URL_USER_PASS/smart/test_repo.git" \
reflog-test &&
cd reflog-test &&
test_commit prepare-for-force-fetch &&
git switch -c away &&
git fetch "$HTTPD_URL_USER_PASS/smart/test_repo.git" \
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
+main:main &&
clone/fetch: anonymize URLs in the reflog Even if we strongly discourage putting credentials into the URLs passed via the command-line, there _is_ support for that, and users _do_ do that. Let's scrub them before writing them to the reflog. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-04 20:08:29 +00:00
# should have been scrubbed down to vanilla URL
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
git log -g main >reflog &&
clone/fetch: anonymize URLs in the reflog Even if we strongly discourage putting credentials into the URLs passed via the command-line, there _is_ support for that, and users _do_ do that. Let's scrub them before writing them to the reflog. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-06-04 20:08:29 +00:00
grep "$HTTPD_URL" reflog &&
! grep "$HTTPD_URL_USER_PASS" reflog
'
remote-curl: make --force-with-lease work with non-ASCII ref names When we invoke a remote transport helper and pass an option with an argument, we quote the argument as a C-style string if necessary. This is the case for the cas option, which implements the --force-with-lease command-line flag, when we're passing a non-ASCII refname. However, the remote curl helper isn't designed to parse such an argument, meaning that if we try to use --force-with-lease with an HTTP push and a non-ASCII refname, we get an error like this: error: cannot parse expected object name '0000000000000000000000000000000000000000"' Note the double quote, which get_oid has reminded us is not valid in an hex object ID. Even if we had been able to parse it, we would send the wrong data to the server: we'd send an escaped ref, which would not behave as the user wanted and might accidentally result in updating or deleting a ref we hadn't intended. Since we need to expect a quoted C-style string here, just check if the first argument is a double quote, and if so, unquote it. Note that if the refname contains a double quote, then we will have double-quoted it already, so there is no ambiguity. We test for this case only in the smart protocol, since the DAV-based protocol is not capable of handling this capability. We use UTF-8 because this is nicer in our tests and friendlier to Windows, but the code should work for all non-ASCII refs. While we're at it, since the name of the option is now well established and isn't going to change, let's inline it instead of using the #define constant. Reported-by: Frej Bjon <frej.bjon@nemit.fi> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-07-21 01:15:11 +00:00
test_expect_success 'Non-ASCII branch name can be used with --force-with-lease' '
cd "$ROOT_PATH" &&
git clone "$HTTPD_URL_USER_PASS/smart/test_repo.git" non-ascii &&
cd non-ascii &&
git checkout -b rama-de-árbol &&
test_commit F &&
git push --force-with-lease origin rama-de-árbol &&
git ls-remote origin refs/heads/rama-de-árbol >actual &&
git ls-remote . refs/heads/rama-de-árbol >expect &&
test_cmp expect actual &&
git push --delete --force-with-lease origin rama-de-árbol &&
git ls-remote origin refs/heads/rama-de-árbol >actual &&
test_must_be_empty actual
'
push: test to verify that push errors are colored This actually only tests whether the push errors/hints are colored if the respective color.* config settings are `always`, but in the regular case they default to `auto` (in which case we color the messages when stderr is connected to an interactive terminal), therefore these tests should suffice. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-21 10:10:04 +00:00
test_expect_success 'colorize errors/hints' '
cd "$ROOT_PATH"/test_repo_clone &&
test_must_fail git -c color.transport=always -c color.advice=always \
-c color.push=always \
t55[4-9]*: adjust the references to the default branch name "main" This trick was performed via $ (cd t && sed -i -e 's/master/main/g' -e 's/MASTER/MAIN/g' \ -e 's/Master/Main/g' -e 's/retsam/niam/g' \ -- t55[4-9]*.sh t556x*) This allows us to define `GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME=main` for those tests. Note that t5541 uses the reversed `master` name: `retsam`. We replace it by the equivalent for `main`: `niam`. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-11-18 23:44:34 +00:00
push origin origin/main^:main 2>act &&
push: test to verify that push errors are colored This actually only tests whether the push errors/hints are colored if the respective color.* config settings are `always`, but in the regular case they default to `auto` (in which case we color the messages when stderr is connected to an interactive terminal), therefore these tests should suffice. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2018-04-21 10:10:04 +00:00
test_decode_color <act >decoded &&
test_i18ngrep "<RED>.*rejected.*<RESET>" decoded &&
test_i18ngrep "<RED>error: failed to push some refs" decoded &&
test_i18ngrep "<YELLOW>hint: " decoded &&
test_i18ngrep ! "^hint: " decoded
'
send-pack: complain about "expecting report" with --helper-status When pushing to a server which erroneously omits the final ref-status report, the client side should complain about the refs for which we didn't receive the status (because we can't just assume they were updated). This works over most transports like ssh, but for http we'll print a very misleading "Everything up-to-date". It works for ssh because send-pack internally sets the status of each ref to REF_STATUS_EXPECTING_REPORT, and then if the server doesn't tell us about a particular ref, it will stay at that value. When we print the final status table, we'll see that we're still on EXPECTING_REPORT and complain then. But for http, we go through remote-curl, which invokes send-pack with "--stateless-rpc --helper-status". The latter option causes send-pack to return a machine-readable list of ref statuses to the remote helper. But ever since its inception in de1a2fdd38 (Smart push over HTTP: client side, 2009-10-30), the send-pack code has simply omitted mention of any ref which ended up in EXPECTING_REPORT. In the remote helper, we then take the absence of any status report from send-pack to mean that the ref was not even something we tried to send, and thus it prints "Everything up-to-date". Fortunately it does detect the eventual non-zero exit from send-pack, and propagates that in its own non-zero exit code. So at least a careful script invoking "git push" would notice the failure. But sending the misleading message on stderr is certainly confusing for humans (not to mention the machine-readable "push --porcelain" output, though again, any careful script should be checking the exit code from push, too). Nobody seems to have noticed because the server in this instance has to be misbehaving: it has promised to support the ref-status capability (otherwise the client will not set EXPECTING_REPORT at all), but didn't send us any. If the connection were simply cut, then send-pack would complain about getting EOF while trying to read the status. But if the server actually sends a flush packet (i.e., saying "now you have all of the ref statuses" without actually sending any), then the client ends up in this confused situation. The fix is simple: we should return an error message from "send-pack --helper-status", just like we would for any other error per-ref error condition (in the test I included, the server simply omits all ref status responses, but a more insidious version of this would skip only some of them). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-18 19:43:47 +00:00
test_expect_success 'report error server does not provide ref status' '
git init "$HTTPD_DOCUMENT_ROOT_PATH/no_report" &&
git -C "$HTTPD_DOCUMENT_ROOT_PATH/no_report" config http.receivepack true &&
test_must_fail git push --porcelain \
$HTTPD_URL_USER_PASS/smart/no_report \
HEAD:refs/tags/will-fail >actual &&
test_must_fail git -C "$HTTPD_DOCUMENT_ROOT_PATH/no_report" \
rev-parse --verify refs/tags/will-fail &&
cat >expect <<-EOF &&
To $HTTPD_URL/smart/no_report
transport-helper: recognize "expecting report" error from send-pack When a transport helper pushes via send-pack, it passes --helper-status to get a machine-readable status back for each ref. The previous commit taught the send-pack code to hand back "error expecting report" if the server did not send us the proper ref-status. And that's enough to cause us to recognize that an error occurred for the ref and print something sensible in our final status table. But we do interpret these messages on the remote-helper side to turn them back into REF_STATUS_* enum values. Recognizing this token to turn it back into REF_STATUS_EXPECTING_REPORT has two advantages: 1. We now print exactly the same message in the human-readable (and machine-readable --porcelain) output for this situation whether the transport went through a helper (e.g., http) or not (e.g., ssh). 2. If any code in the helper really cares about distinguishing EXPECT_REPORT from more generic error conditions, it could now do so. I didn't find any, so this is mostly future-proofing. So this is mostly cosmetic for now, but it seems like the least-surprising thing for the transport-helper code to be doing. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-18 19:45:56 +00:00
! HEAD:refs/tags/will-fail [remote failure] (remote failed to report status)
send-pack: complain about "expecting report" with --helper-status When pushing to a server which erroneously omits the final ref-status report, the client side should complain about the refs for which we didn't receive the status (because we can't just assume they were updated). This works over most transports like ssh, but for http we'll print a very misleading "Everything up-to-date". It works for ssh because send-pack internally sets the status of each ref to REF_STATUS_EXPECTING_REPORT, and then if the server doesn't tell us about a particular ref, it will stay at that value. When we print the final status table, we'll see that we're still on EXPECTING_REPORT and complain then. But for http, we go through remote-curl, which invokes send-pack with "--stateless-rpc --helper-status". The latter option causes send-pack to return a machine-readable list of ref statuses to the remote helper. But ever since its inception in de1a2fdd38 (Smart push over HTTP: client side, 2009-10-30), the send-pack code has simply omitted mention of any ref which ended up in EXPECTING_REPORT. In the remote helper, we then take the absence of any status report from send-pack to mean that the ref was not even something we tried to send, and thus it prints "Everything up-to-date". Fortunately it does detect the eventual non-zero exit from send-pack, and propagates that in its own non-zero exit code. So at least a careful script invoking "git push" would notice the failure. But sending the misleading message on stderr is certainly confusing for humans (not to mention the machine-readable "push --porcelain" output, though again, any careful script should be checking the exit code from push, too). Nobody seems to have noticed because the server in this instance has to be misbehaving: it has promised to support the ref-status capability (otherwise the client will not set EXPECTING_REPORT at all), but didn't send us any. If the connection were simply cut, then send-pack would complain about getting EOF while trying to read the status. But if the server actually sends a flush packet (i.e., saying "now you have all of the ref statuses" without actually sending any), then the client ends up in this confused situation. The fix is simple: we should return an error message from "send-pack --helper-status", just like we would for any other error per-ref error condition (in the test I included, the server simply omits all ref status responses, but a more insidious version of this would skip only some of them). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-10-18 19:43:47 +00:00
Done
EOF
test_cmp expect actual
'
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 00:47:47 +00:00
test_done
Reference in a new issue Copy permalink