git/t/helper/test-tool.h

94 lines
4.2 KiB
C
Raw Normal View History

#ifndef TEST_TOOL_H
#define TEST_TOOL_H
#include "git-compat-util.h"
int cmd__advise_if_enabled(int argc, const char **argv);
int cmd__bitmap(int argc, const char **argv);
int cmd__bloom(int argc, const char **argv);
int cmd__bundle_uri(int argc, const char **argv);
cache-tree: add perf test comparing update and prime Add a performance test comparing the execution times of 'prime_cache_tree()' and 'cache_tree_update(_, WRITE_TREE_SILENT | WRITE_TREE_REPAIR)'. The goal of comparing these two is to identify which is the faster method for rebuilding an invalid cache tree, ultimately to remove one when both are (reundantly) called in immediate succession. Both methods are fast, so the new tests in 'p0090-cache-tree.sh' must call each tested function multiple times to ensure the reported times (to 0.01s resolution) convey the differences between them. The tests compare the timing of a 'test-tool cache-tree' run as a no-op (to capture a baseline for the overhead associated with running the tool), 'cache_tree_update()', and 'prime_cache_tree()' on four scenarios: - A completely valid cache tree - A cache tree with 2 invalid paths - A cache tree with 50 invalid paths - A completely empty cache tree Example results: Test this tree ----------------------------------------------------------- 0090.2: no-op, clean 1.27(0.48+0.52) 0090.3: prime_cache_tree, clean 2.02(0.83+0.85) 0090.4: cache_tree_update, clean 1.30(0.49+0.54) 0090.5: no-op, invalidate 2 1.29(0.48+0.54) 0090.6: prime_cache_tree, invalidate 2 1.98(0.81+0.83) 0090.7: cache_tree_update, invalidate 2 2.12(0.94+0.86) 0090.8: no-op, invalidate 50 1.32(0.50+0.55) 0090.9: prime_cache_tree, invalidate 50 2.10(0.86+0.89) 0090.10: cache_tree_update, invalidate 50 2.35(1.14+0.90) 0090.11: no-op, empty 1.33(0.50+0.54) 0090.12: prime_cache_tree, empty 2.04(0.84+0.87) 0090.13: cache_tree_update, empty 2.51(1.27+0.92) These timings show that, while 'cache_tree_update()' is faster when the cache tree is completely valid, it is equal to or slower than 'prime_cache_tree()' when there are any invalid paths. Since the redundant calls are mostly in scenarios where the cache tree will be at least partially invalid (e.g., 'git reset --hard'), 'prime_cache_tree()' will likely perform better than 'cache_tree_update()' in typical cases. Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Victoria Dye <vdye@github.com> Signed-off-by: Taylor Blau <me@ttaylorr.com>
2022-11-10 19:06:01 +00:00
int cmd__cache_tree(int argc, const char **argv);
int cmd__chmtime(int argc, const char **argv);
int cmd__config(int argc, const char **argv);
maintenance: add start/stop subcommands Add new subcommands to 'git maintenance' that start or stop background maintenance using 'cron', when available. This integration is as simple as I could make it, barring some implementation complications. The schedule is laid out as follows: 0 1-23 * * * $cmd maintenance run --schedule=hourly 0 0 * * 1-6 $cmd maintenance run --schedule=daily 0 0 * * 0 $cmd maintenance run --schedule=weekly where $cmd is a properly-qualified 'git for-each-repo' execution: $cmd=$path/git --exec-path=$path for-each-repo --config=maintenance.repo where $path points to the location of the Git executable running 'git maintenance start'. This is critical for systems with multiple versions of Git. Specifically, macOS has a system version at '/usr/bin/git' while the version that users can install resides at '/usr/local/bin/git' (symlinked to '/usr/local/libexec/git-core/git'). This will also use your locally-built version if you build and run this in your development environment without installing first. This conditional schedule avoids having cron launch multiple 'git for-each-repo' commands in parallel. Such parallel commands would likely lead to the 'hourly' and 'daily' tasks competing over the object database lock. This could lead to to some tasks never being run! Since the --schedule=<frequency> argument will run all tasks with _at least_ the given frequency, the daily runs will also run the hourly tasks. Similarly, the weekly runs will also run the daily and hourly tasks. The GIT_TEST_CRONTAB environment variable is not intended for users to edit, but instead as a way to mock the 'crontab [-l]' command. This variable is set in test-lib.sh to avoid a future test from accidentally running anything with the cron integration from modifying the user's schedule. We use GIT_TEST_CRONTAB='test-tool crontab <file>' in our tests to check how the schedule is modified in 'git maintenance (start|stop)' commands. Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-09-11 17:49:18 +00:00
int cmd__crontab(int argc, const char **argv);
wrapper: add a helper to generate numbers from a CSPRNG There are many situations in which having access to a cryptographically secure pseudorandom number generator (CSPRNG) is helpful. In the future, we'll encounter one of these when dealing with temporary files. To make this possible, let's add a function which reads from a system CSPRNG and returns some bytes. We know that all systems will have such an interface. A CSPRNG is required for a secure TLS or SSH implementation and a Git implementation which provided neither would be of little practical use. In addition, POSIX is set to standardize getentropy(2) in the next version, so in the (potentially distant) future we can rely on that. For systems which lack one of the other interfaces, we provide the ability to use OpenSSL's CSPRNG. OpenSSL is highly portable and functions on practically every known OS, and we know it will have access to some source of cryptographically secure randomness. We also provide support for the arc4random in libbsd for folks who would prefer to use that. Because this is a security sensitive interface, we take some precautions. We either succeed by filling the buffer completely as we requested, or we fail. We don't return partial data because the caller will almost never find that to be a useful behavior. Specify a makefile knob which users can use to specify one or more suitable CSPRNGs, and turn the multiple string options into a set of defines, since we cannot match on strings in the preprocessor. We allow multiple options to make the job of handling this in autoconf easier. The order of options is important here. On systems with arc4random, which is most of the BSDs, we use that, since, except on MirBSD and macOS, it uses ChaCha20, which is extremely fast, and sits entirely in userspace, avoiding a system call. We then prefer getrandom over getentropy, because the former has been available longer on Linux, and then OpenSSL. Finally, if none of those are available, we use /dev/urandom, because most Unix-like operating systems provide that API. We prefer options that don't involve device files when possible because those work in some restricted environments where device files may not be available. Set the configuration variables appropriately for Linux and the BSDs, including macOS, as well as Windows and NonStop. We specifically only consider versions which receive publicly available security support here. For the same reason, we don't specify getrandom(2) on Linux, because CentOS 7 doesn't support it in glibc (although its kernel does) and we don't want to resort to making syscalls. Finally, add a test helper to allow this to be tested by hand and in tests. We don't add any tests, since invoking the CSPRNG is not likely to produce interesting, reproducible results. Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-01-17 21:56:16 +00:00
int cmd__csprng(int argc, const char **argv);
int cmd__ctype(int argc, const char **argv);
int cmd__date(int argc, const char **argv);
int cmd__delta(int argc, const char **argv);
int cmd__dir_iterator(int argc, const char **argv);
int cmd__drop_caches(int argc, const char **argv);
int cmd__dump_cache_tree(int argc, const char **argv);
int cmd__dump_fsmonitor(int argc, const char **argv);
int cmd__dump_split_index(int argc, const char **argv);
int cmd__dump_untracked_cache(int argc, const char **argv);
int cmd__dump_reftable(int argc, const char **argv);
int cmd__env_helper(int argc, const char **argv);
int cmd__example_decorate(int argc, const char **argv);
int cmd__fast_rebase(int argc, const char **argv);
int cmd__fsmonitor_client(int argc, const char **argv);
int cmd__genrandom(int argc, const char **argv);
int cmd__genzeros(int argc, const char **argv);
t0001: fix broken not-quite getcwd(3) test in bed67874e2 With a54e938e5b (strbuf: support long paths w/o read rights in strbuf_getcwd() on FreeBSD, 2017-03-26) we had t0001 break on systems like OpenBSD and AIX whose getcwd(3) has standard (but not like glibc et al) behavior. This was partially fixed in bed67874e2 (t0001: skip test with restrictive permissions if getpwd(3) respects them, 2017-08-07). The problem with that fix is that while its analysis of the problem is correct, it doesn't actually call getcwd(3), instead it invokes "pwd -P". There is no guarantee that "pwd -P" is going to call getcwd(3), as opposed to e.g. being a shell built-in. On AIX under both bash and ksh this test breaks because "pwd -P" will happily display the current working directory, but getcwd(3) called by the "git init" we're testing here will fail to get it. I checked whether clobbering the $PWD environment variable would affect it, and it didn't. Presumably these shells keep track of their working directory internally. There's possible follow-up work here in teaching strbuf_getcwd() to get the working directory with whatever method "pwd" uses on these platforms. See [1] for a discussion of that, but let's take the easy way out here and just skip these tests by fixing the GETCWD_IGNORES_PERMS prerequisite to match the limitations of strbuf_getcwd(). 1. https://lore.kernel.org/git/b650bef5-d739-d98d-e9f1-fa292b6ce982@web.de/ Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-30 16:18:14 +00:00
int cmd__getcwd(int argc, const char **argv);
int cmd__hashmap(int argc, const char **argv);
int cmd__hash_speed(int argc, const char **argv);
int cmd__hexdump(int argc, const char **argv);
int cmd__index_version(int argc, const char **argv);
int cmd__json_writer(int argc, const char **argv);
int cmd__lazy_init_name_hash(int argc, const char **argv);
int cmd__match_trees(int argc, const char **argv);
int cmd__mergesort(int argc, const char **argv);
int cmd__mktemp(int argc, const char **argv);
int cmd__oidmap(int argc, const char **argv);
oidtree: a crit-bit tree for odb_loose_cache This saves 8K per `struct object_directory', meaning it saves around 800MB in my case involving 100K alternates (half or more of those alternates are unlikely to hold loose objects). This is implemented in two parts: a generic, allocation-free `cbtree' and the `oidtree' wrapper on top of it. The latter provides allocation using alloc_state as a memory pool to improve locality and reduce free(3) overhead. Unlike oid-array, the crit-bit tree does not require sorting. Performance is bound by the key length, for oidtree that is fixed at sizeof(struct object_id). There's no need to have 256 oidtrees to mitigate the O(n log n) overhead like we did with oid-array. Being a prefix trie, it is natively suited for expanding short object IDs via prefix-limited iteration in `find_short_object_filename'. On my busy workstation, p4205 performance seems to be roughly unchanged (+/-8%). Startup with 100K total alternates with no loose objects seems around 10-20% faster on a hot cache. (800MB in memory savings means more memory for the kernel FS cache). The generic cbtree implementation does impose some extra overhead for oidtree in that it uses memcmp(3) on "struct object_id" so it wastes cycles comparing 12 extra bytes on SHA-1 repositories. I've not yet explored reducing this overhead, but I expect there are many places in our code base where we'd want to investigate this. More information on crit-bit trees: https://cr.yp.to/critbit.html Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-07-07 23:10:19 +00:00
int cmd__oidtree(int argc, const char **argv);
int cmd__online_cpus(int argc, const char **argv);
int cmd__pack_mtimes(int argc, const char **argv);
int cmd__parse_options(int argc, const char **argv);
int cmd__parse_options_flags(int argc, const char **argv);
int cmd__parse_pathspec_file(int argc, const char** argv);
parse-options: add support for parsing subcommands Several Git commands have subcommands to implement mutually exclusive "operation modes", and they usually parse their subcommand argument with a bunch of if-else if statements. Teach parse-options to handle subcommands as well, which will result in shorter and simpler code with consistent error handling and error messages on unknown or missing subcommand, and it will also make possible for our Bash completion script to handle subcommands programmatically. The approach is guided by the following observations: - Most subcommands [1] are implemented in dedicated functions, and most of those functions [2] either have a signature matching the 'int cmd_foo(int argc, const char **argc, const char *prefix)' signature of builtin commands or can be trivially converted to that signature, because they miss only that last prefix parameter or have no parameters at all. - Subcommand arguments only have long form, and they have no double dash prefix, no negated form, and no description, and they don't take any arguments, and can't be abbreviated. - There must be exactly one subcommand among the arguments, or zero if the command has a default operation mode. - All arguments following the subcommand are considered to be arguments of the subcommand, and, conversely, arguments meant for the subcommand may not preceed the subcommand. So in the end subcommand declaration and parsing would look something like this: parse_opt_subcommand_fn *fn = NULL; struct option builtin_commit_graph_options[] = { OPT_STRING(0, "object-dir", &opts.obj_dir, N_("dir"), N_("the object directory to store the graph")), OPT_SUBCOMMAND("verify", &fn, graph_verify), OPT_SUBCOMMAND("write", &fn, graph_write), OPT_END(), }; argc = parse_options(argc, argv, prefix, options, builtin_commit_graph_usage, 0); return fn(argc, argv, prefix); Here each OPT_SUBCOMMAND specifies the name of the subcommand and the function implementing it, and the address of the same 'fn' subcommand function pointer. parse_options() then processes the arguments until it finds the first argument matching one of the subcommands, sets 'fn' to the function associated with that subcommand, and returns, leaving the rest of the arguments unprocessed. If none of the listed subcommands is found among the arguments, parse_options() will show usage and abort. If a command has a default operation mode, 'fn' should be initialized to the function implementing that mode, and parse_options() should be invoked with the PARSE_OPT_SUBCOMMAND_OPTIONAL flag. In this case parse_options() won't error out when not finding any subcommands, but will return leaving 'fn' unchanged. Note that if that default operation mode has any --options, then the PARSE_OPT_KEEP_UNKNOWN_OPT flag is necessary as well (otherwise parse_options() would error out upon seeing the unknown option meant to the default operation mode). Some thoughts about the implementation: - The same pointer to 'fn' must be specified as 'value' for each OPT_SUBCOMMAND, because there can be only one set of mutually exclusive subcommands; parse_options() will BUG() otherwise. There are other ways to tell parse_options() where to put the function associated with the subcommand given on the command line, but I didn't like them: - Change parse_options()'s signature by adding a pointer to subcommand function to be set to the function associated with the given subcommand, affecting all callsites, even those that don't have subcommands. - Introduce a specific parse_options_and_subcommand() variant with that extra funcion parameter. - I decided against automatically calling the subcommand function from within parse_options(), because: - There are commands that have to perform additional actions after option parsing but before calling the function implementing the specified subcommand. - The return code of the subcommand is usually the return code of the git command, but preserving the return code of the automatically called subcommand function would have made the API awkward. - Also add a OPT_SUBCOMMAND_F() variant to allow specifying an option flag: we have two subcommands that are purposefully excluded from completion ('git remote rm' and 'git stash save'), so they'll have to be specified with the PARSE_OPT_NOCOMPLETE flag. - Some of the 'parse_opt_flags' don't make sense with subcommands, and using them is probably just an oversight or misunderstanding. Therefore parse_options() will BUG() when invoked with any of the following flags while the options array contains at least one OPT_SUBCOMMAND: - PARSE_OPT_KEEP_DASHDASH: parse_options() stops parsing arguments when encountering a "--" argument, so it doesn't make sense to expect and keep one before a subcommand, because it would prevent the parsing of the subcommand. However, this flag is allowed in combination with the PARSE_OPT_SUBCOMMAND_OPTIONAL flag, because the double dash might be meaningful for the command's default operation mode, e.g. to disambiguate refs and pathspecs. - PARSE_OPT_STOP_AT_NON_OPTION: As its name suggests, this flag tells parse_options() to stop as soon as it encouners a non-option argument, but subcommands are by definition not options... so how could they be parsed, then?! - PARSE_OPT_KEEP_UNKNOWN: This flag can be used to collect any unknown --options and then pass them to a different command or subsystem. Surely if a command has subcommands, then this functionality should rather be delegated to one of those subcommands, and not performed by the command itself. However, this flag is allowed in combination with the PARSE_OPT_SUBCOMMAND_OPTIONAL flag, making possible to pass --options to the default operation mode. - If the command with subcommands has a default operation mode, then all arguments to the command must preceed the arguments of the subcommand. AFAICT we don't have any commands where this makes a difference, because in those commands either only the command accepts any arguments ('notes' and 'remote'), or only the default subcommand ('reflog' and 'stash'), but never both. - The 'argv' array passed to subcommand functions currently starts with the name of the subcommand. Keep this behavior. AFAICT no subcommand functions depend on the actual content of 'argv[0]', but the parse_options() call handling their options expects that the options start at argv[1]. - To support handling subcommands programmatically in our Bash completion script, 'git cmd --git-completion-helper' will now list both subcommands and regular --options, if any. This means that the completion script will have to separate subcommands (i.e. words without a double dash prefix) from --options on its own, but that's rather easy to do, and it's not much work either, because the number of subcommands a command might have is rather low, and those commands accept only a single --option or none at all. An alternative would be to introduce a separate option that lists only subcommands, but then the completion script would need not one but two git invocations and command substitutions for commands with subcommands. Note that this change doesn't affect the behavior of our Bash completion script, because when completing the --option of a command with subcommands, e.g. for 'git notes --<TAB>', then all subcommands will be filtered out anyway, as none of them will match the word to be completed starting with that double dash prefix. [1] Except 'git rerere', because many of its subcommands are implemented in the bodies of the if-else if statements parsing the command's subcommand argument. [2] Except 'credential', 'credential-store' and 'fsmonitor--daemon', because some of the functions implementing their subcommands take special parameters. Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2022-08-19 16:04:00 +00:00
int cmd__parse_subcommand(int argc, const char **argv);
int cmd__partial_clone(int argc, const char **argv);
int cmd__path_utils(int argc, const char **argv);
int cmd__pcre2_config(int argc, const char **argv);
int cmd__pkt_line(int argc, const char **argv);
int cmd__prio_queue(int argc, const char **argv);
receive-pack: add new proc-receive hook Git calls an internal `execute_commands` function to handle commands sent from client to `git-receive-pack`. Regardless of what references the user pushes, git creates or updates the corresponding references if the user has write-permission. A contributor who has no write-permission, cannot push to the repository directly. So, the contributor has to write commits to an alternate location, and sends pull request by emails or by other ways. We call this workflow as a distributed workflow. It would be more convenient to work in a centralized workflow like what Gerrit provided for some cases. For example, a read-only user who cannot push to a branch directly can run the following `git push` command to push commits to a pseudo reference (has a prefix "refs/for/", not "refs/heads/") to create a code review. git push origin \ HEAD:refs/for/<branch-name>/<session> The `<branch-name>` in the above example can be as simple as "master", or a more complicated branch name like "foo/bar". The `<session>` in the above example command can be the local branch name of the client side, such as "my/topic". We cannot implement a centralized workflow elegantly by using "pre-receive" + "post-receive", because Git will call the internal function "execute_commands" to create references (even the special pseudo reference) between these two hooks. Even though we can delete the temporarily created pseudo reference via the "post-receive" hook, having a temporary reference is not safe for concurrent pushes. So, add a filter and a new handler to support this kind of workflow. The filter will check the prefix of the reference name, and if the command has a special reference name, the filter will turn a specific field (`run_proc_receive`) on for the command. Commands with this filed turned on will be executed by a new handler (a hook named "proc-receive") instead of the internal `execute_commands` function. We can use this "proc-receive" command to create pull requests or send emails for code review. Suggested by Junio, this "proc-receive" hook reads the commands, push-options (optional), and send result using a protocol in pkt-line format. In the following example, the letter "S" stands for "receive-pack" and letter "H" stands for the hook. # Version and features negotiation. S: PKT-LINE(version=1\0push-options atomic...) S: flush-pkt H: PKT-LINE(version=1\0push-options...) H: flush-pkt # Send commands from server to the hook. S: PKT-LINE(<old-oid> <new-oid> <ref>) S: ... ... S: flush-pkt # Send push-options only if the 'push-options' feature is enabled. S: PKT-LINE(push-option) S: ... ... S: flush-pkt # Receive result from the hook. # OK, run this command successfully. H: PKT-LINE(ok <ref>) # NO, I reject it. H: PKT-LINE(ng <ref> <reason>) # Fall through, let 'receive-pack' to execute it. H: PKT-LINE(ok <ref>) H: PKT-LINE(option fall-through) # OK, but has an alternate reference. The alternate reference name # and other status can be given in options H: PKT-LINE(ok <ref>) H: PKT-LINE(option refname <refname>) H: PKT-LINE(option old-oid <old-oid>) H: PKT-LINE(option new-oid <new-oid>) H: PKT-LINE(option forced-update) H: ... ... H: flush-pkt After receiving a command, the hook will execute the command, and may create/update different reference. For example, a command for a pseudo reference "refs/for/master/topic" may create/update different reference such as "refs/pull/123/head". The alternate reference name and other status are given in option lines. The list of commands returned from "proc-receive" will replace the relevant commands that are sent from user to "receive-pack", and "receive-pack" will continue to run the "execute_commands" function and other routines. Finally, the result of the execution of these commands will be reported to end user. The reporting function from "receive-pack" to "send-pack" will be extended in latter commit just like what the "proc-receive" hook reports to "receive-pack". Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-08-27 15:45:44 +00:00
int cmd__proc_receive(int argc, const char **argv);
Test the progress display 'progress.c' has seen a few fixes recently [1], and, unfortunately, some of those fixes required further fixes [2]. It seems it's time to have a few tests focusing on the subtleties of the progress display. Add the 'test-tool progress' subcommand to help testing the progress display, reading instructions from standard input and turning them into calls to the display_progress() and display_throughput() functions with the given parameters. The progress display is, however, critically dependent on timing, because it's only updated once every second or, if the toal is known in advance, every 1%, and there is the throughput rate as well. These make the progress display far too undeterministic for testing as-is. To address this, add a few testing-specific variables and functions to 'progress.c', allowing the the new test helper to: - Disable the triggered-every-second SIGALRM and set the 'progress_update' flag explicitly based in the input instructions. This way the progress line will be updated deterministically when the test wants it to be updated. - Specify the time elapsed since start_progress() to make the throughput rate calculations deterministic. Add the new test script 't0500-progress-display.sh' to check a few simple cases with and without throughput, and that a shorter progress line properly covers up the previously displayed line in different situations. [1] See commits 545dc345eb (progress: break too long progress bar lines, 2019-04-12) and 9f1fd84e15 (progress: clear previous progress update dynamically, 2019-04-12). [2] 1aed1a5f25 (progress: avoid empty line when breaking the progress line, 2019-05-19) Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2019-09-16 20:54:12 +00:00
int cmd__progress(int argc, const char **argv);
int cmd__reach(int argc, const char **argv);
int cmd__read_cache(int argc, const char **argv);
int cmd__read_graph(int argc, const char **argv);
int cmd__read_midx(int argc, const char **argv);
int cmd__ref_store(int argc, const char **argv);
int cmd__rot13_filter(int argc, const char **argv);
int cmd__reftable(int argc, const char **argv);
int cmd__regex(int argc, const char **argv);
int cmd__repository(int argc, const char **argv);
int cmd__revision_walking(int argc, const char **argv);
int cmd__run_command(int argc, const char **argv);
int cmd__scrap_cache_tree(int argc, const char **argv);
int cmd__serve_v2(int argc, const char **argv);
int cmd__sha1(int argc, const char **argv);
2022-11-07 21:23:10 +00:00
int cmd__sha1_is_sha1dc(int argc, const char **argv);
int cmd__oid_array(int argc, const char **argv);
int cmd__sha256(int argc, const char **argv);
int cmd__sigchain(int argc, const char **argv);
int cmd__simple_ipc(int argc, const char **argv);
int cmd__strcmp_offset(int argc, const char **argv);
int cmd__string_list(int argc, const char **argv);
int cmd__submodule(int argc, const char **argv);
int cmd__submodule_config(int argc, const char **argv);
int cmd__submodule_nested_repo_config(int argc, const char **argv);
int cmd__subprocess(int argc, const char **argv);
int cmd__trace2(int argc, const char **argv);
int cmd__userdiff(int argc, const char **argv);
int cmd__urlmatch_normalization(int argc, const char **argv);
int cmd__xml_encode(int argc, const char **argv);
int cmd__wildmatch(int argc, const char **argv);
#ifdef GIT_WINDOWS_NATIVE
int cmd__windows_named_pipe(int argc, const char **argv);
#endif
int cmd__write_cache(int argc, const char **argv);
int cmd_hash_impl(int ac, const char **av, int algo);
#endif