git/http.c

1587 lines
39 KiB
C
Raw Normal View History

#include "http.h"
#include "pack.h"
#include "sideband.h"
#include "run-command.h"
#include "url.h"
#include "urlmatch.h"
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 10:31:21 +00:00
#include "credential.h"
#include "version.h"
#include "pkt-line.h"
int active_requests;
int http_is_verbose;
size_t http_post_buffer = 16 * LARGE_PACKET_MAX;
#if LIBCURL_VERSION_NUM >= 0x070a06
#define LIBCURL_CAN_HANDLE_AUTH_ANY
#endif
static int min_curl_sessions = 1;
static int curl_session_count;
#ifdef USE_CURL_MULTI
static int max_requests = -1;
static CURLM *curlm;
#endif
#ifndef NO_CURL_EASY_DUPHANDLE
static CURL *curl_default;
#endif
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
#define PREV_BUF_SIZE 4096
#define RANGE_HEADER_SIZE 30
char curl_errorstr[CURL_ERROR_SIZE];
static int curl_ssl_verify = -1;
static int curl_ssl_try;
static const char *ssl_cert;
#if LIBCURL_VERSION_NUM >= 0x070903
static const char *ssl_key;
#endif
#if LIBCURL_VERSION_NUM >= 0x070908
static const char *ssl_capath;
#endif
static const char *ssl_cainfo;
static long curl_low_speed_limit = -1;
static long curl_low_speed_time = -1;
static int curl_ftp_no_epsv;
static const char *curl_http_proxy;
static const char *curl_cookie_file;
static int curl_save_cookies;
http: hoist credential request out of handle_curl_result When we are handling a curl response code in http_request or in the remote-curl RPC code, we use the handle_curl_result helper to translate curl's response into an easy-to-use code. When we see an HTTP 401, we do one of two things: 1. If we already had a filled-in credential, we mark it as rejected, and then return HTTP_NOAUTH to indicate to the caller that we failed. 2. If we didn't, then we ask for a new credential and tell the caller HTTP_REAUTH to indicate that they may want to try again. Rejecting in the first case makes sense; it is the natural result of the request we just made. However, prompting for more credentials in the second step does not always make sense. We do not know for sure that the caller is going to make a second request, and nor are we sure that it will be to the same URL. Logically, the prompt belongs not to the request we just finished, but to the request we are (maybe) about to make. In practice, it is very hard to trigger any bad behavior. Currently, if we make a second request, it will always be to the same URL (even in the face of redirects, because curl handles the redirects internally). And we almost always retry on HTTP_REAUTH these days. The one exception is if we are streaming a large RPC request to the server (e.g., a pushed packfile), in which case we cannot restart. It's extremely unlikely to see a 401 response at this stage, though, as we would typically have seen it when we sent a probe request, before streaming the data. This patch drops the automatic prompt out of case 2, and instead requires the caller to do it. This is a few extra lines of code, and the bug it fixes is unlikely to come up in practice. But it is conceptually cleaner, and paves the way for better handling of credentials across redirects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 08:31:45 +00:00
struct credential http_auth = CREDENTIAL_INIT;
static int http_proactive_auth;
static const char *user_agent;
#if LIBCURL_VERSION_NUM >= 0x071700
/* Use CURLOPT_KEYPASSWD as is */
#elif LIBCURL_VERSION_NUM >= 0x070903
#define CURLOPT_KEYPASSWD CURLOPT_SSLKEYPASSWD
#else
#define CURLOPT_KEYPASSWD CURLOPT_SSLCERTPASSWD
#endif
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 10:31:21 +00:00
static struct credential cert_auth = CREDENTIAL_INIT;
static int ssl_cert_password_required;
static struct curl_slist *pragma_header;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
static struct curl_slist *no_pragma_header;
static struct active_request_slot *active_queue_head;
size_t fread_buffer(char *ptr, size_t eltsize, size_t nmemb, void *buffer_)
{
size_t size = eltsize * nmemb;
struct buffer *buffer = buffer_;
if (size > buffer->buf.len - buffer->posn)
size = buffer->buf.len - buffer->posn;
memcpy(ptr, buffer->buf.buf + buffer->posn, size);
buffer->posn += size;
return size;
}
#ifndef NO_CURL_IOCTL
curlioerr ioctl_buffer(CURL *handle, int cmd, void *clientp)
{
struct buffer *buffer = clientp;
switch (cmd) {
case CURLIOCMD_NOP:
return CURLIOE_OK;
case CURLIOCMD_RESTARTREAD:
buffer->posn = 0;
return CURLIOE_OK;
default:
return CURLIOE_UNKNOWNCMD;
}
}
#endif
size_t fwrite_buffer(char *ptr, size_t eltsize, size_t nmemb, void *buffer_)
{
size_t size = eltsize * nmemb;
struct strbuf *buffer = buffer_;
strbuf_add(buffer, ptr, size);
return size;
}
size_t fwrite_null(char *ptr, size_t eltsize, size_t nmemb, void *strbuf)
{
return eltsize * nmemb;
}
#ifdef USE_CURL_MULTI
static void process_curl_messages(void)
{
int num_messages;
struct active_request_slot *slot;
CURLMsg *curl_message = curl_multi_info_read(curlm, &num_messages);
while (curl_message != NULL) {
if (curl_message->msg == CURLMSG_DONE) {
int curl_result = curl_message->data.result;
slot = active_queue_head;
while (slot != NULL &&
slot->curl != curl_message->easy_handle)
slot = slot->next;
if (slot != NULL) {
curl_multi_remove_handle(curlm, slot->curl);
slot->curl_result = curl_result;
finish_active_slot(slot);
} else {
fprintf(stderr, "Received DONE message for unknown request!\n");
}
} else {
fprintf(stderr, "Unknown CURL message received: %d\n",
(int)curl_message->msg);
}
curl_message = curl_multi_info_read(curlm, &num_messages);
}
}
#endif
static int http_options(const char *var, const char *value, void *cb)
{
if (!strcmp("http.sslverify", var)) {
curl_ssl_verify = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.sslcert", var))
return git_config_string(&ssl_cert, var, value);
#if LIBCURL_VERSION_NUM >= 0x070903
if (!strcmp("http.sslkey", var))
return git_config_string(&ssl_key, var, value);
#endif
#if LIBCURL_VERSION_NUM >= 0x070908
if (!strcmp("http.sslcapath", var))
return git_config_string(&ssl_capath, var, value);
#endif
if (!strcmp("http.sslcainfo", var))
return git_config_string(&ssl_cainfo, var, value);
if (!strcmp("http.sslcertpasswordprotected", var)) {
ssl_cert_password_required = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.ssltry", var)) {
curl_ssl_try = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.minsessions", var)) {
min_curl_sessions = git_config_int(var, value);
#ifndef USE_CURL_MULTI
if (min_curl_sessions > 1)
min_curl_sessions = 1;
#endif
return 0;
}
#ifdef USE_CURL_MULTI
if (!strcmp("http.maxrequests", var)) {
max_requests = git_config_int(var, value);
return 0;
}
#endif
if (!strcmp("http.lowspeedlimit", var)) {
curl_low_speed_limit = (long)git_config_int(var, value);
return 0;
}
if (!strcmp("http.lowspeedtime", var)) {
curl_low_speed_time = (long)git_config_int(var, value);
return 0;
}
if (!strcmp("http.noepsv", var)) {
curl_ftp_no_epsv = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.proxy", var))
return git_config_string(&curl_http_proxy, var, value);
if (!strcmp("http.cookiefile", var))
return git_config_string(&curl_cookie_file, var, value);
if (!strcmp("http.savecookies", var)) {
curl_save_cookies = git_config_bool(var, value);
return 0;
}
if (!strcmp("http.postbuffer", var)) {
http_post_buffer = git_config_int(var, value);
if (http_post_buffer < LARGE_PACKET_MAX)
http_post_buffer = LARGE_PACKET_MAX;
return 0;
}
if (!strcmp("http.useragent", var))
return git_config_string(&user_agent, var, value);
/* Fall back on the default ones */
return git_default_config(var, value, cb);
}
static void init_curl_http_auth(CURL *result)
{
if (!http_auth.username)
return;
credential_fill(&http_auth);
#if LIBCURL_VERSION_NUM >= 0x071301
curl_easy_setopt(result, CURLOPT_USERNAME, http_auth.username);
curl_easy_setopt(result, CURLOPT_PASSWORD, http_auth.password);
#else
{
static struct strbuf up = STRBUF_INIT;
/*
* Note that we assume we only ever have a single set of
* credentials in a given program run, so we do not have
* to worry about updating this buffer, only setting its
* initial value.
*/
if (!up.len)
strbuf_addf(&up, "%s:%s",
http_auth.username, http_auth.password);
curl_easy_setopt(result, CURLOPT_USERPWD, up.buf);
}
#endif
}
static int has_cert_password(void)
{
if (ssl_cert == NULL || ssl_cert_password_required != 1)
return 0;
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 10:31:21 +00:00
if (!cert_auth.password) {
cert_auth.protocol = xstrdup("cert");
cert_auth.username = xstrdup("");
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 10:31:21 +00:00
cert_auth.path = xstrdup(ssl_cert);
credential_fill(&cert_auth);
}
return 1;
}
#if LIBCURL_VERSION_NUM >= 0x071900
static void set_curl_keepalive(CURL *c)
{
curl_easy_setopt(c, CURLOPT_TCP_KEEPALIVE, 1);
}
#elif LIBCURL_VERSION_NUM >= 0x071000
static int sockopt_callback(void *client, curl_socket_t fd, curlsocktype type)
{
int ka = 1;
int rc;
socklen_t len = (socklen_t)sizeof(ka);
if (type != CURLSOCKTYPE_IPCXN)
return 0;
rc = setsockopt(fd, SOL_SOCKET, SO_KEEPALIVE, (void *)&ka, len);
if (rc < 0)
warning("unable to set SO_KEEPALIVE on socket %s",
strerror(errno));
return 0; /* CURL_SOCKOPT_OK only exists since curl 7.21.5 */
}
static void set_curl_keepalive(CURL *c)
{
curl_easy_setopt(c, CURLOPT_SOCKOPTFUNCTION, sockopt_callback);
}
#else
static void set_curl_keepalive(CURL *c)
{
/* not supported on older curl versions */
}
#endif
static CURL *get_curl_handle(void)
{
CURL *result = curl_easy_init();
if (!curl_ssl_verify) {
curl_easy_setopt(result, CURLOPT_SSL_VERIFYPEER, 0);
curl_easy_setopt(result, CURLOPT_SSL_VERIFYHOST, 0);
} else {
/* Verify authenticity of the peer's certificate */
curl_easy_setopt(result, CURLOPT_SSL_VERIFYPEER, 1);
/* The name in the cert must match whom we tried to connect */
curl_easy_setopt(result, CURLOPT_SSL_VERIFYHOST, 2);
}
#if LIBCURL_VERSION_NUM >= 0x070907
curl_easy_setopt(result, CURLOPT_NETRC, CURL_NETRC_OPTIONAL);
#endif
#ifdef LIBCURL_CAN_HANDLE_AUTH_ANY
curl_easy_setopt(result, CURLOPT_HTTPAUTH, CURLAUTH_ANY);
#endif
if (http_proactive_auth)
init_curl_http_auth(result);
if (ssl_cert != NULL)
curl_easy_setopt(result, CURLOPT_SSLCERT, ssl_cert);
if (has_cert_password())
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 10:31:21 +00:00
curl_easy_setopt(result, CURLOPT_KEYPASSWD, cert_auth.password);
#if LIBCURL_VERSION_NUM >= 0x070903
if (ssl_key != NULL)
curl_easy_setopt(result, CURLOPT_SSLKEY, ssl_key);
#endif
#if LIBCURL_VERSION_NUM >= 0x070908
if (ssl_capath != NULL)
curl_easy_setopt(result, CURLOPT_CAPATH, ssl_capath);
#endif
if (ssl_cainfo != NULL)
curl_easy_setopt(result, CURLOPT_CAINFO, ssl_cainfo);
if (curl_low_speed_limit > 0 && curl_low_speed_time > 0) {
curl_easy_setopt(result, CURLOPT_LOW_SPEED_LIMIT,
curl_low_speed_limit);
curl_easy_setopt(result, CURLOPT_LOW_SPEED_TIME,
curl_low_speed_time);
}
curl_easy_setopt(result, CURLOPT_FOLLOWLOCATION, 1);
#if LIBCURL_VERSION_NUM >= 0x071301
curl_easy_setopt(result, CURLOPT_POSTREDIR, CURL_REDIR_POST_ALL);
#elif LIBCURL_VERSION_NUM >= 0x071101
curl_easy_setopt(result, CURLOPT_POST301, 1);
#endif
if (getenv("GIT_CURL_VERBOSE"))
curl_easy_setopt(result, CURLOPT_VERBOSE, 1);
curl_easy_setopt(result, CURLOPT_USERAGENT,
user_agent ? user_agent : git_user_agent());
if (curl_ftp_no_epsv)
curl_easy_setopt(result, CURLOPT_FTP_USE_EPSV, 0);
#ifdef CURLOPT_USE_SSL
if (curl_ssl_try)
curl_easy_setopt(result, CURLOPT_USE_SSL, CURLUSESSL_TRY);
#endif
if (curl_http_proxy) {
curl_easy_setopt(result, CURLOPT_PROXY, curl_http_proxy);
curl_easy_setopt(result, CURLOPT_PROXYAUTH, CURLAUTH_ANY);
}
set_curl_keepalive(result);
return result;
}
static void set_from_env(const char **var, const char *envname)
{
const char *val = getenv(envname);
if (val)
*var = val;
}
void http_init(struct remote *remote, const char *url, int proactive_auth)
{
char *low_speed_limit;
char *low_speed_time;
char *normalized_url;
struct urlmatch_config config = { STRING_LIST_INIT_DUP };
config.section = "http";
config.key = NULL;
config.collect_fn = http_options;
config.cascade_fn = git_default_config;
config.cb = NULL;
http_is_verbose = 0;
normalized_url = url_normalize(url, &config.url);
git_config(urlmatch_config_entry, &config);
free(normalized_url);
curl_global_init(CURL_GLOBAL_ALL);
http_proactive_auth = proactive_auth;
if (remote && remote->http_proxy)
curl_http_proxy = xstrdup(remote->http_proxy);
pragma_header = curl_slist_append(pragma_header, "Pragma: no-cache");
no_pragma_header = curl_slist_append(no_pragma_header, "Pragma:");
#ifdef USE_CURL_MULTI
{
char *http_max_requests = getenv("GIT_HTTP_MAX_REQUESTS");
if (http_max_requests != NULL)
max_requests = atoi(http_max_requests);
}
curlm = curl_multi_init();
if (curlm == NULL) {
fprintf(stderr, "Error creating curl multi handle.\n");
exit(1);
}
#endif
if (getenv("GIT_SSL_NO_VERIFY"))
curl_ssl_verify = 0;
set_from_env(&ssl_cert, "GIT_SSL_CERT");
#if LIBCURL_VERSION_NUM >= 0x070903
set_from_env(&ssl_key, "GIT_SSL_KEY");
#endif
#if LIBCURL_VERSION_NUM >= 0x070908
set_from_env(&ssl_capath, "GIT_SSL_CAPATH");
#endif
set_from_env(&ssl_cainfo, "GIT_SSL_CAINFO");
set_from_env(&user_agent, "GIT_HTTP_USER_AGENT");
low_speed_limit = getenv("GIT_HTTP_LOW_SPEED_LIMIT");
if (low_speed_limit != NULL)
curl_low_speed_limit = strtol(low_speed_limit, NULL, 10);
low_speed_time = getenv("GIT_HTTP_LOW_SPEED_TIME");
if (low_speed_time != NULL)
curl_low_speed_time = strtol(low_speed_time, NULL, 10);
if (curl_ssl_verify == -1)
curl_ssl_verify = 1;
curl_session_count = 0;
#ifdef USE_CURL_MULTI
if (max_requests < 1)
max_requests = DEFAULT_MAX_REQUESTS;
#endif
if (getenv("GIT_CURL_FTP_NO_EPSV"))
curl_ftp_no_epsv = 1;
if (url) {
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 10:31:21 +00:00
credential_from_url(&http_auth, url);
if (!ssl_cert_password_required &&
getenv("GIT_SSL_CERT_PASSWORD_PROTECTED") &&
starts_with(url, "https://"))
ssl_cert_password_required = 1;
}
#ifndef NO_CURL_EASY_DUPHANDLE
curl_default = get_curl_handle();
#endif
}
void http_cleanup(void)
{
struct active_request_slot *slot = active_queue_head;
while (slot != NULL) {
struct active_request_slot *next = slot->next;
if (slot->curl != NULL) {
#ifdef USE_CURL_MULTI
curl_multi_remove_handle(curlm, slot->curl);
#endif
curl_easy_cleanup(slot->curl);
}
free(slot);
slot = next;
}
active_queue_head = NULL;
#ifndef NO_CURL_EASY_DUPHANDLE
curl_easy_cleanup(curl_default);
#endif
#ifdef USE_CURL_MULTI
curl_multi_cleanup(curlm);
#endif
curl_global_cleanup();
curl_slist_free_all(pragma_header);
pragma_header = NULL;
curl_slist_free_all(no_pragma_header);
no_pragma_header = NULL;
if (curl_http_proxy) {
free((void *)curl_http_proxy);
curl_http_proxy = NULL;
}
http: use credential API to get passwords This patch converts the http code to use the new credential API, both for http authentication as well as for getting certificate passwords. Most of the code change is simply variable naming (the passwords are now contained inside the credential struct) or deletion of obsolete code (the credential code handles URL parsing and prompting for us). The behavior should be the same, with one exception: the credential code will prompt with a description based on the credential components. Therefore, the old prompt of: Username for 'example.com': Password for 'example.com': now looks like: Username for 'https://example.com/repo.git': Password for 'https://user@example.com/repo.git': Note that we include more information in each line, specifically: 1. We now include the protocol. While more noisy, this is an important part of knowing what you are accessing (especially if you care about http vs https). 2. We include the username in the password prompt. This is not a big deal when you have just been prompted for it, but the username may also come from the remote's URL (and after future patches, from configuration or credential helpers). In that case, it's a nice reminder of the user for which you're giving the password. 3. We include the path component of the URL. In many cases, the user won't care about this and it's simply noise (i.e., they'll use the same credential for a whole site). However, that is part of a larger question, which is whether path components should be part of credential context, both for prompting and for lookup by storage helpers. That issue will be addressed as a whole in a future patch. Similarly, for unlocking certificates, we used to say: Certificate Password for 'example.com': and we now say: Password for 'cert:///path/to/certificate': Showing the path to the client certificate makes more sense, as that is what you are unlocking, not "example.com". Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-10 10:31:21 +00:00
if (cert_auth.password != NULL) {
memset(cert_auth.password, 0, strlen(cert_auth.password));
free(cert_auth.password);
cert_auth.password = NULL;
}
ssl_cert_password_required = 0;
}
struct active_request_slot *get_active_slot(void)
{
struct active_request_slot *slot = active_queue_head;
struct active_request_slot *newslot;
#ifdef USE_CURL_MULTI
int num_transfers;
/* Wait for a slot to open up if the queue is full */
while (active_requests >= max_requests) {
curl_multi_perform(curlm, &num_transfers);
if (num_transfers < active_requests)
process_curl_messages();
}
#endif
while (slot != NULL && slot->in_use)
slot = slot->next;
if (slot == NULL) {
newslot = xmalloc(sizeof(*newslot));
newslot->curl = NULL;
newslot->in_use = 0;
newslot->next = NULL;
slot = active_queue_head;
if (slot == NULL) {
active_queue_head = newslot;
} else {
while (slot->next != NULL)
slot = slot->next;
slot->next = newslot;
}
slot = newslot;
}
if (slot->curl == NULL) {
#ifdef NO_CURL_EASY_DUPHANDLE
slot->curl = get_curl_handle();
#else
slot->curl = curl_easy_duphandle(curl_default);
#endif
curl_session_count++;
}
active_requests++;
slot->in_use = 1;
slot->results = NULL;
slot->finished = NULL;
slot->callback_data = NULL;
slot->callback_func = NULL;
curl_easy_setopt(slot->curl, CURLOPT_COOKIEFILE, curl_cookie_file);
if (curl_save_cookies)
curl_easy_setopt(slot->curl, CURLOPT_COOKIEJAR, curl_cookie_file);
curl_easy_setopt(slot->curl, CURLOPT_HTTPHEADER, pragma_header);
curl_easy_setopt(slot->curl, CURLOPT_ERRORBUFFER, curl_errorstr);
curl_easy_setopt(slot->curl, CURLOPT_CUSTOMREQUEST, NULL);
curl_easy_setopt(slot->curl, CURLOPT_READFUNCTION, NULL);
curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION, NULL);
curl_easy_setopt(slot->curl, CURLOPT_POSTFIELDS, NULL);
curl_easy_setopt(slot->curl, CURLOPT_UPLOAD, 0);
curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1);
http: set curl FAILONERROR each time we select a handle Because we reuse curl handles for multiple requests, the setup of a handle happens in two stages: stable, global setup and per-request setup. The lifecycle of a handle is something like: 1. get_curl_handle; do basic global setup that will last through the whole program (e.g., setting the user agent, ssl options, etc) 2. get_active_slot; set up a per-request baseline (e.g., clearing the read/write functions, making it a GET request, etc) 3. perform the request with curl_*_perform functions 4. goto step 2 to perform another request Breaking it down this way means we can avoid doing global setup from step (1) repeatedly, but we still finish step (2) with a predictable baseline setup that callers can rely on. Until commit 6d052d7 (http: add HTTP_KEEP_ERROR option, 2013-04-05), setting curl's FAILONERROR option was a global setup; we never changed it. However, 6d052d7 introduced an option where some requests might turn off FAILONERROR. Later requests using the same handle would have the option unexpectedly turned off, which meant they would not notice http failures at all. This could easily be seen in the test-suite for the "half-auth" cases of t5541 and t5551. The initial requests turned off FAILONERROR, which meant it was erroneously off for the rpc POST. That worked fine for a successful request, but meant that we failed to react properly to the HTTP 401 (instead, we treated whatever the server handed us as a successful message body). The solution is simple: now that FAILONERROR is a per-request setting, we move it to get_active_slot to make sure it is reset for each request. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-16 00:30:38 +00:00
curl_easy_setopt(slot->curl, CURLOPT_FAILONERROR, 1);
if (http_auth.password)
init_curl_http_auth(slot->curl);
return slot;
}
int start_active_slot(struct active_request_slot *slot)
{
#ifdef USE_CURL_MULTI
CURLMcode curlm_result = curl_multi_add_handle(curlm, slot->curl);
int num_transfers;
if (curlm_result != CURLM_OK &&
curlm_result != CURLM_CALL_MULTI_PERFORM) {
active_requests--;
slot->in_use = 0;
return 0;
}
/*
* We know there must be something to do, since we just added
* something.
*/
curl_multi_perform(curlm, &num_transfers);
#endif
return 1;
}
#ifdef USE_CURL_MULTI
struct fill_chain {
void *data;
int (*fill)(void *);
struct fill_chain *next;
};
static struct fill_chain *fill_cfg;
void add_fill_function(void *data, int (*fill)(void *))
{
struct fill_chain *new = xmalloc(sizeof(*new));
struct fill_chain **linkp = &fill_cfg;
new->data = data;
new->fill = fill;
new->next = NULL;
while (*linkp)
linkp = &(*linkp)->next;
*linkp = new;
}
void fill_active_slots(void)
{
struct active_request_slot *slot = active_queue_head;
while (active_requests < max_requests) {
struct fill_chain *fill;
for (fill = fill_cfg; fill; fill = fill->next)
if (fill->fill(fill->data))
break;
if (!fill)
break;
}
while (slot != NULL) {
if (!slot->in_use && slot->curl != NULL
&& curl_session_count > min_curl_sessions) {
curl_easy_cleanup(slot->curl);
slot->curl = NULL;
curl_session_count--;
}
slot = slot->next;
}
}
void step_active_slots(void)
{
int num_transfers;
CURLMcode curlm_result;
do {
curlm_result = curl_multi_perform(curlm, &num_transfers);
} while (curlm_result == CURLM_CALL_MULTI_PERFORM);
if (num_transfers < active_requests) {
process_curl_messages();
fill_active_slots();
}
}
#endif
void run_active_slot(struct active_request_slot *slot)
{
#ifdef USE_CURL_MULTI
fd_set readfds;
fd_set writefds;
fd_set excfds;
int max_fd;
struct timeval select_timeout;
int finished = 0;
slot->finished = &finished;
while (!finished) {
step_active_slots();
if (slot->in_use) {
#if LIBCURL_VERSION_NUM >= 0x070f04
long curl_timeout;
curl_multi_timeout(curlm, &curl_timeout);
if (curl_timeout == 0) {
continue;
} else if (curl_timeout == -1) {
select_timeout.tv_sec = 0;
select_timeout.tv_usec = 50000;
} else {
select_timeout.tv_sec = curl_timeout / 1000;
select_timeout.tv_usec = (curl_timeout % 1000) * 1000;
}
#else
select_timeout.tv_sec = 0;
select_timeout.tv_usec = 50000;
#endif
max_fd = -1;
FD_ZERO(&readfds);
FD_ZERO(&writefds);
FD_ZERO(&excfds);
curl_multi_fdset(curlm, &readfds, &writefds, &excfds, &max_fd);
/*
* It can happen that curl_multi_timeout returns a pathologically
* long timeout when curl_multi_fdset returns no file descriptors
* to read. See commit message for more details.
*/
if (max_fd < 0 &&
(select_timeout.tv_sec > 0 ||
select_timeout.tv_usec > 50000)) {
select_timeout.tv_sec = 0;
select_timeout.tv_usec = 50000;
}
select(max_fd+1, &readfds, &writefds, &excfds, &select_timeout);
}
}
#else
while (slot->in_use) {
slot->curl_result = curl_easy_perform(slot->curl);
finish_active_slot(slot);
}
#endif
}
static void closedown_active_slot(struct active_request_slot *slot)
{
active_requests--;
slot->in_use = 0;
}
static void release_active_slot(struct active_request_slot *slot)
{
closedown_active_slot(slot);
if (slot->curl && curl_session_count > min_curl_sessions) {
#ifdef USE_CURL_MULTI
curl_multi_remove_handle(curlm, slot->curl);
#endif
curl_easy_cleanup(slot->curl);
slot->curl = NULL;
curl_session_count--;
}
#ifdef USE_CURL_MULTI
fill_active_slots();
#endif
}
void finish_active_slot(struct active_request_slot *slot)
{
closedown_active_slot(slot);
curl_easy_getinfo(slot->curl, CURLINFO_HTTP_CODE, &slot->http_code);
if (slot->finished != NULL)
(*slot->finished) = 1;
/* Store slot results so they can be read after the slot is reused */
if (slot->results != NULL) {
slot->results->curl_result = slot->curl_result;
slot->results->http_code = slot->http_code;
#if LIBCURL_VERSION_NUM >= 0x070a08
curl_easy_getinfo(slot->curl, CURLINFO_HTTPAUTH_AVAIL,
&slot->results->auth_avail);
#else
slot->results->auth_avail = 0;
#endif
}
/* Run callback if appropriate */
if (slot->callback_func != NULL)
slot->callback_func(slot->callback_data);
}
void finish_all_active_slots(void)
{
struct active_request_slot *slot = active_queue_head;
while (slot != NULL)
if (slot->in_use) {
run_active_slot(slot);
slot = active_queue_head;
} else {
slot = slot->next;
}
}
/* Helpers for modifying and creating URLs */
static inline int needs_quote(int ch)
{
if (((ch >= 'A') && (ch <= 'Z'))
|| ((ch >= 'a') && (ch <= 'z'))
|| ((ch >= '0') && (ch <= '9'))
|| (ch == '/')
|| (ch == '-')
|| (ch == '.'))
return 0;
return 1;
}
static char *quote_ref_url(const char *base, const char *ref)
{
struct strbuf buf = STRBUF_INIT;
const char *cp;
int ch;
end_url_with_slash(&buf, base);
for (cp = ref; (ch = *cp) != 0; cp++)
if (needs_quote(ch))
strbuf_addf(&buf, "%%%02x", ch);
else
strbuf_addch(&buf, *cp);
return strbuf_detach(&buf, NULL);
}
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
void append_remote_object_url(struct strbuf *buf, const char *url,
const char *hex,
int only_two_digit_prefix)
{
end_url_with_slash(buf, url);
strbuf_addf(buf, "objects/%.*s/", 2, hex);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
if (!only_two_digit_prefix)
strbuf_addf(buf, "%s", hex+2);
}
char *get_remote_object_url(const char *url, const char *hex,
int only_two_digit_prefix)
{
struct strbuf buf = STRBUF_INIT;
append_remote_object_url(&buf, url, hex, only_two_digit_prefix);
return strbuf_detach(&buf, NULL);
}
int handle_curl_result(struct slot_results *results)
{
/*
* If we see a failing http code with CURLE_OK, we have turned off
* FAILONERROR (to keep the server's custom error response), and should
* translate the code into failure here.
*/
if (results->curl_result == CURLE_OK &&
results->http_code >= 400) {
results->curl_result = CURLE_HTTP_RETURNED_ERROR;
/*
* Normally curl will already have put the "reason phrase"
* from the server into curl_errorstr; unfortunately without
* FAILONERROR it is lost, so we can give only the numeric
* status code.
*/
snprintf(curl_errorstr, sizeof(curl_errorstr),
"The requested URL returned error: %ld",
results->http_code);
}
if (results->curl_result == CURLE_OK) {
credential_approve(&http_auth);
return HTTP_OK;
} else if (missing_target(results))
return HTTP_MISSING_TARGET;
else if (results->http_code == 401) {
if (http_auth.username && http_auth.password) {
credential_reject(&http_auth);
return HTTP_NOAUTH;
} else {
return HTTP_REAUTH;
}
} else {
2012-09-12 21:08:05 +00:00
#if LIBCURL_VERSION_NUM >= 0x070c00
if (!curl_errorstr[0])
strlcpy(curl_errorstr,
curl_easy_strerror(results->curl_result),
sizeof(curl_errorstr));
2012-09-12 21:08:05 +00:00
#endif
return HTTP_ERROR;
}
}
http: never use curl_easy_perform We currently don't reuse http connections when fetching via the smart-http protocol. This is bad because the TCP handshake introduces latency, and especially because SSL connection setup may be non-trivial. We can fix it by consistently using curl's "multi" interface. The reason is rather complicated: Our http code has two ways of being used: queuing many "slots" to be fetched in parallel, or fetching a single request in a blocking manner. The parallel code is built on curl's "multi" interface. Most of the single-request code uses http_request, which is built on top of the parallel code (we just feed it one slot, and wait until it finishes). However, one could also accomplish the single-request scheme by avoiding curl's multi interface entirely and just using curl_easy_perform. This is simpler, and is used by post_rpc in the smart-http protocol. It does work to use the same curl handle in both contexts, as long as it is not at the same time. However, internally curl may not share all of the cached resources between both contexts. In particular, a connection formed using the "multi" code will go into a reuse pool connected to the "multi" object. Further requests using the "easy" interface will not be able to reuse that connection. The smart http protocol does ref discovery via http_request, which uses the "multi" interface, and then follows up with the "easy" interface for its rpc calls. As a result, we make two HTTP connections rather than reusing a single one. We could teach the ref discovery to use the "easy" interface. But it is only once we have done this discovery that we know whether the protocol will be smart or dumb. If it is dumb, then our further requests, which want to fetch objects in parallel, will not be able to reuse the same connection. Instead, this patch switches post_rpc to build on the parallel interface, which means that we use it consistently everywhere. It's a little more complicated to use, but since we have the infrastructure already, it doesn't add any code; we can just factor out the relevant bits from http_request. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18 10:34:20 +00:00
int run_one_slot(struct active_request_slot *slot,
struct slot_results *results)
{
slot->results = results;
if (!start_active_slot(slot)) {
snprintf(curl_errorstr, sizeof(curl_errorstr),
"failed to start HTTP request");
return HTTP_START_FAILED;
}
run_active_slot(slot);
return handle_curl_result(results);
}
static CURLcode curlinfo_strbuf(CURL *curl, CURLINFO info, struct strbuf *buf)
{
char *ptr;
CURLcode ret;
strbuf_reset(buf);
ret = curl_easy_getinfo(curl, info, &ptr);
if (!ret && ptr)
strbuf_addstr(buf, ptr);
return ret;
}
/* http_request() targets */
#define HTTP_REQUEST_STRBUF 0
#define HTTP_REQUEST_FILE 1
static int http_request(const char *url,
void *result, int target,
const struct http_get_options *options)
{
struct active_request_slot *slot;
struct slot_results results;
struct curl_slist *headers = NULL;
struct strbuf buf = STRBUF_INIT;
int ret;
slot = get_active_slot();
curl_easy_setopt(slot->curl, CURLOPT_HTTPGET, 1);
if (result == NULL) {
curl_easy_setopt(slot->curl, CURLOPT_NOBODY, 1);
} else {
curl_easy_setopt(slot->curl, CURLOPT_NOBODY, 0);
curl_easy_setopt(slot->curl, CURLOPT_FILE, result);
if (target == HTTP_REQUEST_FILE) {
long posn = ftell(result);
curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION,
fwrite);
if (posn > 0) {
strbuf_addf(&buf, "Range: bytes=%ld-", posn);
headers = curl_slist_append(headers, buf.buf);
strbuf_reset(&buf);
}
} else
curl_easy_setopt(slot->curl, CURLOPT_WRITEFUNCTION,
fwrite_buffer);
}
strbuf_addstr(&buf, "Pragma:");
if (options && options->no_cache)
strbuf_addstr(&buf, " no-cache");
if (options && options->keep_error)
curl_easy_setopt(slot->curl, CURLOPT_FAILONERROR, 0);
headers = curl_slist_append(headers, buf.buf);
curl_easy_setopt(slot->curl, CURLOPT_URL, url);
curl_easy_setopt(slot->curl, CURLOPT_HTTPHEADER, headers);
curl_easy_setopt(slot->curl, CURLOPT_ENCODING, "gzip");
http: never use curl_easy_perform We currently don't reuse http connections when fetching via the smart-http protocol. This is bad because the TCP handshake introduces latency, and especially because SSL connection setup may be non-trivial. We can fix it by consistently using curl's "multi" interface. The reason is rather complicated: Our http code has two ways of being used: queuing many "slots" to be fetched in parallel, or fetching a single request in a blocking manner. The parallel code is built on curl's "multi" interface. Most of the single-request code uses http_request, which is built on top of the parallel code (we just feed it one slot, and wait until it finishes). However, one could also accomplish the single-request scheme by avoiding curl's multi interface entirely and just using curl_easy_perform. This is simpler, and is used by post_rpc in the smart-http protocol. It does work to use the same curl handle in both contexts, as long as it is not at the same time. However, internally curl may not share all of the cached resources between both contexts. In particular, a connection formed using the "multi" code will go into a reuse pool connected to the "multi" object. Further requests using the "easy" interface will not be able to reuse that connection. The smart http protocol does ref discovery via http_request, which uses the "multi" interface, and then follows up with the "easy" interface for its rpc calls. As a result, we make two HTTP connections rather than reusing a single one. We could teach the ref discovery to use the "easy" interface. But it is only once we have done this discovery that we know whether the protocol will be smart or dumb. If it is dumb, then our further requests, which want to fetch objects in parallel, will not be able to reuse the same connection. Instead, this patch switches post_rpc to build on the parallel interface, which means that we use it consistently everywhere. It's a little more complicated to use, but since we have the infrastructure already, it doesn't add any code; we can just factor out the relevant bits from http_request. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-02-18 10:34:20 +00:00
ret = run_one_slot(slot, &results);
if (options && options->content_type)
curlinfo_strbuf(slot->curl, CURLINFO_CONTENT_TYPE,
options->content_type);
if (options && options->effective_url)
curlinfo_strbuf(slot->curl, CURLINFO_EFFECTIVE_URL,
options->effective_url);
curl_slist_free_all(headers);
strbuf_release(&buf);
return ret;
}
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 08:34:05 +00:00
/*
* Update the "base" url to a more appropriate value, as deduced by
* redirects seen when requesting a URL starting with "url".
*
* The "asked" parameter is a URL that we asked curl to access, and must begin
* with "base".
*
* The "got" parameter is the URL that curl reported to us as where we ended
* up.
*
* Returns 1 if we updated the base url, 0 otherwise.
*
* Our basic strategy is to compare "base" and "asked" to find the bits
* specific to our request. We then strip those bits off of "got" to yield the
* new base. So for example, if our base is "http://example.com/foo.git",
* and we ask for "http://example.com/foo.git/info/refs", we might end up
* with "https://other.example.com/foo.git/info/refs". We would want the
* new URL to become "https://other.example.com/foo.git".
*
* Note that this assumes a sane redirect scheme. It's entirely possible
* in the example above to end up at a URL that does not even end in
* "info/refs". In such a case we simply punt, as there is not much we can
* do (and such a scheme is unlikely to represent a real git repository,
* which means we are likely about to abort anyway).
*/
static int update_url_from_redirect(struct strbuf *base,
const char *asked,
const struct strbuf *got)
{
const char *tail;
size_t tail_len;
if (!strcmp(asked, got->buf))
return 0;
if (!starts_with(asked, base->buf))
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 08:34:05 +00:00
die("BUG: update_url_from_redirect: %s is not a superset of %s",
asked, base->buf);
tail = asked + base->len;
tail_len = strlen(tail);
if (got->len < tail_len ||
strcmp(tail, got->buf + got->len - tail_len))
return 0; /* insane redirect scheme */
strbuf_reset(base);
strbuf_add(base, got->buf, got->len - tail_len);
return 1;
}
static int http_request_reauth(const char *url,
void *result, int target,
struct http_get_options *options)
{
int ret = http_request(url, result, target, options);
http: update base URLs when we see redirects If a caller asks the http_get_* functions to go to a particular URL and we end up elsewhere due to a redirect, the effective_url field can tell us where we went. It would be nice to remember this redirect and short-cut further requests for two reasons: 1. It's more efficient. Otherwise we spend an extra http round-trip to the server for each subsequent request, just to get redirected. 2. If we end up with an http 401 and are going to ask for credentials, it is to feed them to the redirect target. If the redirect is an http->https upgrade, this means our credentials may be provided on the http leg, just to end up redirected to https. And if the redirect crosses server boundaries, then curl will drop the credentials entirely as it follows the redirect. However, it, it is not enough to simply record the effective URL we saw and use that for subsequent requests. We were originally fed a "base" url like: http://example.com/foo.git and we want to figure out what the new base is, even though the URLs we see may be: original: http://example.com/foo.git/info/refs effective: http://example.com/bar.git/info/refs Subsequent requests will not be for "info/refs", but for other paths relative to the base. We must ask the caller to pass in the original base, and we must pass the redirected base back to the caller (so that it can generate more URLs from it). Furthermore, we need to feed the new base to the credential code, so that requests to credential helpers (or to the user) match the URL we will be requesting. This patch teaches http_request_reauth to do this munging. Since it is the caller who cares about making more URLs, it seems at first glance that callers could simply check effective_url themselves and handle it. However, since we need to update the credential struct before the second re-auth request, we have to do it inside http_request_reauth. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 08:34:05 +00:00
if (options && options->effective_url && options->base_url) {
if (update_url_from_redirect(options->base_url,
url, options->effective_url)) {
credential_from_url(&http_auth, options->base_url->buf);
url = options->effective_url->buf;
}
}
if (ret != HTTP_REAUTH)
return ret;
/*
* If we are using KEEP_ERROR, the previous request may have
* put cruft into our output stream; we should clear it out before
* making our next request. We only know how to do this for
* the strbuf case, but that is enough to satisfy current callers.
*/
if (options && options->keep_error) {
switch (target) {
case HTTP_REQUEST_STRBUF:
strbuf_reset(result);
break;
default:
die("BUG: HTTP_KEEP_ERROR is only supported with strbufs");
}
}
http: hoist credential request out of handle_curl_result When we are handling a curl response code in http_request or in the remote-curl RPC code, we use the handle_curl_result helper to translate curl's response into an easy-to-use code. When we see an HTTP 401, we do one of two things: 1. If we already had a filled-in credential, we mark it as rejected, and then return HTTP_NOAUTH to indicate to the caller that we failed. 2. If we didn't, then we ask for a new credential and tell the caller HTTP_REAUTH to indicate that they may want to try again. Rejecting in the first case makes sense; it is the natural result of the request we just made. However, prompting for more credentials in the second step does not always make sense. We do not know for sure that the caller is going to make a second request, and nor are we sure that it will be to the same URL. Logically, the prompt belongs not to the request we just finished, but to the request we are (maybe) about to make. In practice, it is very hard to trigger any bad behavior. Currently, if we make a second request, it will always be to the same URL (even in the face of redirects, because curl handles the redirects internally). And we almost always retry on HTTP_REAUTH these days. The one exception is if we are streaming a large RPC request to the server (e.g., a pushed packfile), in which case we cannot restart. It's extremely unlikely to see a 401 response at this stage, though, as we would typically have seen it when we sent a probe request, before streaming the data. This patch drops the automatic prompt out of case 2, and instead requires the caller to do it. This is a few extra lines of code, and the bug it fixes is unlikely to come up in practice. But it is conceptually cleaner, and paves the way for better handling of credentials across redirects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
2013-09-28 08:31:45 +00:00
credential_fill(&http_auth);
return http_request(url, result, target, options);
}
int http_get_strbuf(const char *url,
struct strbuf *result,
struct http_get_options *options)
{
return http_request_reauth(url, result, HTTP_REQUEST_STRBUF, options);
}
/*
* Downloads a URL and stores the result in the given file.
*
* If a previous interrupted download is detected (i.e. a previous temporary
* file is still around) the download is resumed.
*/
static int http_get_file(const char *url, const char *filename,
struct http_get_options *options)
{
int ret;
struct strbuf tmpfile = STRBUF_INIT;
FILE *result;
strbuf_addf(&tmpfile, "%s.temp", filename);
result = fopen(tmpfile.buf, "a");
if (!result) {
error("Unable to open local file %s", tmpfile.buf);
ret = HTTP_ERROR;
goto cleanup;
}
ret = http_request_reauth(url, result, HTTP_REQUEST_FILE, options);
fclose(result);
if (ret == HTTP_OK && move_temp_to_file(tmpfile.buf, filename))
ret = HTTP_ERROR;
cleanup:
strbuf_release(&tmpfile);
return ret;
}
int http_fetch_ref(const char *base, struct ref *ref)
{
struct http_get_options options = {0};
char *url;
struct strbuf buffer = STRBUF_INIT;
int ret = -1;
options.no_cache = 1;
url = quote_ref_url(base, ref->name);
if (http_get_strbuf(url, &buffer, &options) == HTTP_OK) {
strbuf_rtrim(&buffer);
if (buffer.len == 40)
ret = get_sha1_hex(buffer.buf, ref->old_sha1);
else if (starts_with(buffer.buf, "ref: ")) {
ref->symref = xstrdup(buffer.buf + 5);
ret = 0;
}
}
strbuf_release(&buffer);
free(url);
return ret;
}
/* Helpers for fetching packs */
static char *fetch_pack_index(unsigned char *sha1, const char *base_url)
{
char *url, *tmp;
struct strbuf buf = STRBUF_INIT;
if (http_is_verbose)
fprintf(stderr, "Getting index for pack %s\n", sha1_to_hex(sha1));
end_url_with_slash(&buf, base_url);
strbuf_addf(&buf, "objects/pack/pack-%s.idx", sha1_to_hex(sha1));
url = strbuf_detach(&buf, NULL);
strbuf_addf(&buf, "%s.temp", sha1_pack_index_name(sha1));
tmp = strbuf_detach(&buf, NULL);
if (http_get_file(url, tmp, NULL) != HTTP_OK) {
error("Unable to get pack index %s", url);
free(tmp);
tmp = NULL;
}
free(url);
return tmp;
}
static int fetch_and_setup_pack_index(struct packed_git **packs_head,
unsigned char *sha1, const char *base_url)
{
struct packed_git *new_pack;
char *tmp_idx = NULL;
int ret;
if (has_pack_index(sha1)) {
new_pack = parse_pack_index(sha1, NULL);
if (!new_pack)
return -1; /* parse_pack_index() already issued error message */
goto add_pack;
}
tmp_idx = fetch_pack_index(sha1, base_url);
if (!tmp_idx)
return -1;
new_pack = parse_pack_index(sha1, tmp_idx);
if (!new_pack) {
unlink(tmp_idx);
free(tmp_idx);
return -1; /* parse_pack_index() already issued error message */
}
ret = verify_pack_index(new_pack);
if (!ret) {
close_pack_index(new_pack);
ret = move_temp_to_file(tmp_idx, sha1_pack_index_name(sha1));
}
free(tmp_idx);
if (ret)
return -1;
add_pack:
new_pack->next = *packs_head;
*packs_head = new_pack;
return 0;
}
int http_get_info_packs(const char *base_url, struct packed_git **packs_head)
{
struct http_get_options options = {0};
int ret = 0, i = 0;
char *url, *data;
struct strbuf buf = STRBUF_INIT;
unsigned char sha1[20];
end_url_with_slash(&buf, base_url);
strbuf_addstr(&buf, "objects/info/packs");
url = strbuf_detach(&buf, NULL);
options.no_cache = 1;
ret = http_get_strbuf(url, &buf, &options);
if (ret != HTTP_OK)
goto cleanup;
data = buf.buf;
while (i < buf.len) {
switch (data[i]) {
case 'P':
i++;
if (i + 52 <= buf.len &&
starts_with(data + i, " pack-") &&
starts_with(data + i + 46, ".pack\n")) {
get_sha1_hex(data + i + 6, sha1);
fetch_and_setup_pack_index(packs_head, sha1,
base_url);
i += 51;
break;
}
default:
while (i < buf.len && data[i] != '\n')
i++;
}
i++;
}
cleanup:
free(url);
return ret;
}
void release_http_pack_request(struct http_pack_request *preq)
{
if (preq->packfile != NULL) {
fclose(preq->packfile);
preq->packfile = NULL;
}
if (preq->range_header != NULL) {
curl_slist_free_all(preq->range_header);
preq->range_header = NULL;
}
preq->slot = NULL;
free(preq->url);
}
int finish_http_pack_request(struct http_pack_request *preq)
{
struct packed_git **lst;
struct packed_git *p = preq->target;
char *tmp_idx;
struct child_process ip;
const char *ip_argv[8];
close_pack_index(p);
fclose(preq->packfile);
preq->packfile = NULL;
lst = preq->lst;
while (*lst != p)
lst = &((*lst)->next);
*lst = (*lst)->next;
tmp_idx = xstrdup(preq->tmpfile);
strcpy(tmp_idx + strlen(tmp_idx) - strlen(".pack.temp"),
".idx.temp");
ip_argv[0] = "index-pack";
ip_argv[1] = "-o";
ip_argv[2] = tmp_idx;
ip_argv[3] = preq->tmpfile;
ip_argv[4] = NULL;
memset(&ip, 0, sizeof(ip));
ip.argv = ip_argv;
ip.git_cmd = 1;
ip.no_stdin = 1;
ip.no_stdout = 1;
if (run_command(&ip)) {
unlink(preq->tmpfile);
unlink(tmp_idx);
free(tmp_idx);
return -1;
}
unlink(sha1_pack_index_name(p->sha1));
if (move_temp_to_file(preq->tmpfile, sha1_pack_name(p->sha1))
|| move_temp_to_file(tmp_idx, sha1_pack_index_name(p->sha1))) {
free(tmp_idx);
return -1;
}
install_packed_git(p);
free(tmp_idx);
return 0;
}
struct http_pack_request *new_http_pack_request(
struct packed_git *target, const char *base_url)
{
long prev_posn = 0;
char range[RANGE_HEADER_SIZE];
struct strbuf buf = STRBUF_INIT;
struct http_pack_request *preq;
preq = xcalloc(1, sizeof(*preq));
preq->target = target;
end_url_with_slash(&buf, base_url);
strbuf_addf(&buf, "objects/pack/pack-%s.pack",
sha1_to_hex(target->sha1));
preq->url = strbuf_detach(&buf, NULL);
snprintf(preq->tmpfile, sizeof(preq->tmpfile), "%s.temp",
sha1_pack_name(target->sha1));
preq->packfile = fopen(preq->tmpfile, "a");
if (!preq->packfile) {
error("Unable to open local file %s for pack",
preq->tmpfile);
goto abort;
}
preq->slot = get_active_slot();
curl_easy_setopt(preq->slot->curl, CURLOPT_FILE, preq->packfile);
curl_easy_setopt(preq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite);
curl_easy_setopt(preq->slot->curl, CURLOPT_URL, preq->url);
curl_easy_setopt(preq->slot->curl, CURLOPT_HTTPHEADER,
no_pragma_header);
/*
* If there is data present from a previous transfer attempt,
* resume where it left off
*/
prev_posn = ftell(preq->packfile);
if (prev_posn>0) {
if (http_is_verbose)
fprintf(stderr,
"Resuming fetch of pack %s at byte %ld\n",
sha1_to_hex(target->sha1), prev_posn);
sprintf(range, "Range: bytes=%ld-", prev_posn);
preq->range_header = curl_slist_append(NULL, range);
curl_easy_setopt(preq->slot->curl, CURLOPT_HTTPHEADER,
preq->range_header);
}
return preq;
abort:
free(preq->url);
free(preq);
return NULL;
}
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
/* Helpers for fetching objects (loose) */
static size_t fwrite_sha1_file(char *ptr, size_t eltsize, size_t nmemb,
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
void *data)
{
unsigned char expn[4096];
size_t size = eltsize * nmemb;
int posn = 0;
struct http_object_request *freq =
(struct http_object_request *)data;
do {
ssize_t retval = xwrite(freq->localfile,
(char *) ptr + posn, size - posn);
if (retval < 0)
return posn;
posn += retval;
} while (posn < size);
freq->stream.avail_in = size;
freq->stream.next_in = (void *)ptr;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
do {
freq->stream.next_out = expn;
freq->stream.avail_out = sizeof(expn);
freq->zret = git_inflate(&freq->stream, Z_SYNC_FLUSH);
git_SHA1_Update(&freq->c, expn,
sizeof(expn) - freq->stream.avail_out);
} while (freq->stream.avail_in && freq->zret == Z_OK);
return size;
}
struct http_object_request *new_http_object_request(const char *base_url,
unsigned char *sha1)
{
char *hex = sha1_to_hex(sha1);
const char *filename;
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
char prevfile[PATH_MAX];
int prevlocal;
char prev_buf[PREV_BUF_SIZE];
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
ssize_t prev_read = 0;
long prev_posn = 0;
char range[RANGE_HEADER_SIZE];
struct curl_slist *range_header = NULL;
struct http_object_request *freq;
freq = xcalloc(1, sizeof(*freq));
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
hashcpy(freq->sha1, sha1);
freq->localfile = -1;
filename = sha1_file_name(sha1);
snprintf(freq->tmpfile, sizeof(freq->tmpfile),
"%s.temp", filename);
snprintf(prevfile, sizeof(prevfile), "%s.prev", filename);
unlink_or_warn(prevfile);
rename(freq->tmpfile, prevfile);
unlink_or_warn(freq->tmpfile);
if (freq->localfile != -1)
error("fd leakage in start: %d", freq->localfile);
freq->localfile = open(freq->tmpfile,
O_WRONLY | O_CREAT | O_EXCL, 0666);
/*
* This could have failed due to the "lazy directory creation";
* try to mkdir the last path component.
*/
if (freq->localfile < 0 && errno == ENOENT) {
char *dir = strrchr(freq->tmpfile, '/');
if (dir) {
*dir = 0;
mkdir(freq->tmpfile, 0777);
*dir = '/';
}
freq->localfile = open(freq->tmpfile,
O_WRONLY | O_CREAT | O_EXCL, 0666);
}
if (freq->localfile < 0) {
error("Couldn't create temporary file %s: %s",
freq->tmpfile, strerror(errno));
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
goto abort;
}
git_inflate_init(&freq->stream);
git_SHA1_Init(&freq->c);
freq->url = get_remote_object_url(base_url, hex, 0);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
/*
* If a previous temp file is present, process what was already
* fetched.
*/
prevlocal = open(prevfile, O_RDONLY);
if (prevlocal != -1) {
do {
prev_read = xread(prevlocal, prev_buf, PREV_BUF_SIZE);
if (prev_read>0) {
if (fwrite_sha1_file(prev_buf,
1,
prev_read,
freq) == prev_read) {
prev_posn += prev_read;
} else {
prev_read = -1;
}
}
} while (prev_read > 0);
close(prevlocal);
}
unlink_or_warn(prevfile);
/*
* Reset inflate/SHA1 if there was an error reading the previous temp
* file; also rewind to the beginning of the local file.
*/
if (prev_read == -1) {
memset(&freq->stream, 0, sizeof(freq->stream));
git_inflate_init(&freq->stream);
git_SHA1_Init(&freq->c);
if (prev_posn>0) {
prev_posn = 0;
lseek(freq->localfile, 0, SEEK_SET);
if (ftruncate(freq->localfile, 0) < 0) {
error("Couldn't truncate temporary file %s: %s",
freq->tmpfile, strerror(errno));
goto abort;
}
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
}
}
freq->slot = get_active_slot();
curl_easy_setopt(freq->slot->curl, CURLOPT_FILE, freq);
curl_easy_setopt(freq->slot->curl, CURLOPT_WRITEFUNCTION, fwrite_sha1_file);
curl_easy_setopt(freq->slot->curl, CURLOPT_ERRORBUFFER, freq->errorstr);
curl_easy_setopt(freq->slot->curl, CURLOPT_URL, freq->url);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
curl_easy_setopt(freq->slot->curl, CURLOPT_HTTPHEADER, no_pragma_header);
/*
* If we have successfully processed data from a previous fetch
* attempt, only fetch the data we don't already have.
*/
if (prev_posn>0) {
if (http_is_verbose)
fprintf(stderr,
"Resuming fetch of object %s at byte %ld\n",
hex, prev_posn);
sprintf(range, "Range: bytes=%ld-", prev_posn);
range_header = curl_slist_append(range_header, range);
curl_easy_setopt(freq->slot->curl,
CURLOPT_HTTPHEADER, range_header);
}
return freq;
abort:
free(freq->url);
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
free(freq);
return NULL;
}
void process_http_object_request(struct http_object_request *freq)
{
if (freq->slot == NULL)
return;
freq->curl_result = freq->slot->curl_result;
freq->http_code = freq->slot->http_code;
freq->slot = NULL;
}
int finish_http_object_request(struct http_object_request *freq)
{
struct stat st;
close(freq->localfile);
freq->localfile = -1;
process_http_object_request(freq);
if (freq->http_code == 416) {
warning("requested range invalid; we may already have all the data.");
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
} else if (freq->curl_result != CURLE_OK) {
if (stat(freq->tmpfile, &st) == 0)
if (st.st_size == 0)
unlink_or_warn(freq->tmpfile);
return -1;
}
git_inflate_end(&freq->stream);
git_SHA1_Final(freq->real_sha1, &freq->c);
if (freq->zret != Z_STREAM_END) {
unlink_or_warn(freq->tmpfile);
return -1;
}
if (hashcmp(freq->sha1, freq->real_sha1)) {
unlink_or_warn(freq->tmpfile);
return -1;
}
freq->rename =
move_temp_to_file(freq->tmpfile, sha1_file_name(freq->sha1));
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
return freq->rename;
}
void abort_http_object_request(struct http_object_request *freq)
{
unlink_or_warn(freq->tmpfile);
release_http_object_request(freq);
}
void release_http_object_request(struct http_object_request *freq)
{
if (freq->localfile != -1) {
close(freq->localfile);
freq->localfile = -1;
}
if (freq->url != NULL) {
free(freq->url);
freq->url = NULL;
}
if (freq->slot != NULL) {
freq->slot->callback_func = NULL;
freq->slot->callback_data = NULL;
release_active_slot(freq->slot);
freq->slot = NULL;
}
http*: add helper methods for fetching objects (loose) The code handling the fetching of loose objects in http-push.c and http-walker.c have been refactored into new methods and a new struct (object_http_request) in http.c. They are not meant to be invoked elsewhere. The new methods in http.c are - new_http_object_request - process_http_object_request - finish_http_object_request - abort_http_object_request - release_http_object_request and the new struct is http_object_request. RANGER_HEADER_SIZE and no_pragma_header is no longer made available outside of http.c, since after the above changes, there are no other instances of usage outside of http.c. Remove members of the transfer_request struct in http-push.c and http-walker.c, including filename, real_sha1 and zret, as they are used no longer used. Move the methods append_remote_object_url() and get_remote_object_url() from http-push.c to http.c. Additionally, get_remote_object_url() is no longer defined only when USE_CURL_MULTI is defined, since non-USE_CURL_MULTI code in http.c uses it (namely, in new_http_object_request()). Refactor code from http-push.c::start_fetch_loose() and http-walker.c::start_object_fetch_request() that deals with the details of coming up with the filename to store the retrieved object, resuming a previously aborted request, and making a new curl request, into a new function, new_http_object_request(). Refactor code from http-walker.c::process_object_request() into the function, process_http_object_request(). Refactor code from http-push.c::finish_request() and http-walker.c::finish_object_request() into a new function, finish_http_object_request(). It returns the result of the move_temp_to_file() invocation. Add a function, release_http_object_request(), which cleans up object request data. http-push.c and http-walker.c invoke this function separately; http-push.c::release_request() and http-walker.c::release_object_request() do not invoke this function. Add a function, abort_http_object_request(), which unlink()s the object file and invokes release_http_object_request(). Update http-walker.c::abort_object_request() to use this. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-06-06 08:44:02 +00:00
}