Allow Podman containers to request to use a specific OCI runtime
if multiple runtimes are configured. This is the first step to
properly supporting containers in a multi-runtime environment.
The biggest changes are that all OCI runtimes are now initialized
when Podman creates its runtime, and containers now use the
runtime requested in their configuration (instead of always the
default runtime).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
- PREFIX is now passed saved in the binary at build-time so that default
paths match installation paths.
- ETCDIR is also overridable in a similar way.
- DESTDIR is now applied on top of PREFIX for install/uninstall steps.
Previously, a DESTDIR=/foo PREFIX=/bar make would install into /bar,
rather than /foo/bar.
Signed-off-by: Lawrence Chan <element103@gmail.com>
add a new configuration `runtime_supports_json` to list what OCI
runtimes support the --log-format=json option. If the runtime is not
listed here, libpod will redirect stdout/stderr from the runtime
process.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
use a pause process to keep the user and mount namespace alive.
The pause process is created immediately on reload, and all successive
Podman processes will refer to it for joining the user&mount
namespace.
This solves all the race conditions we had on joining the correct
namespaces using the conmon processes.
As a fallback if the join fails for any reason (e.g. the pause process
was killed), then we try to join the running containers as we were
doing before.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
once the default event logger was removed from libpod.conf, we need to
set the default based on whether the systemd build tag is used or not.
Signed-off-by: baude <bbaude@redhat.com>
We want to start supporting the registries.conf format.
Also start showing blocked registries in podman info
Fix sorting so all registries are listed together in podman info.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
We merged #2950 with some nits still remaining, as Giuseppe was
going on PTO. This addresses those small requested changes.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
it is useful to migrate existing containers to a new version of
podman. Currently, it is needed to migrate rootless containers that
were created with podman <= 1.2 to a newer version which requires all
containers to be running in the same user namespace.
Closes: https://github.com/containers/libpod/issues/2935
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
add the ability for podman to read and write events to journald instead
of just a logfile. This can be controlled in libpod.conf with the
`events_logger` attribute of `journald` or `file`. The default will be
set to `journald`.
Signed-off-by: baude <bbaude@redhat.com>
create immediately a namespace if we need a refresh. This is
necessary to access the rootless storage.
Closes: https://github.com/containers/libpod/issues/2894
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
simplify the rootless implementation to use a single user namespace
for all the running containers.
This makes the rootless implementation behave more like root Podman,
where each container is created in the host environment.
There are multiple advantages to it: 1) much simpler implementation as
there is only one namespace to join. 2) we can join namespaces owned
by different containers. 3) commands like ps won't be limited to what
container they can access as previously we either had access to the
storage from a new namespace or access to /proc when running from the
host. 4) rootless varlink works. 5) there are only two ways to enter
in a namespace, either by creating a new one if no containers are
running or joining the existing one from any container.
Containers created by older Podman versions must be restarted.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
in the few places where we care about skipping the storage
initialization, we can simply use the process effective UID, instead
of relying on a global boolean flag.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
We have a very high performance JSON library that doesn't need to
perform code generation. Let's use it instead of our questionably
performant, reflection-dependent deep copy library.
Most changes because some functions can now return errors.
Also converts cmd/podman to use jsoniter, instead of pkg/json,
for increased performance.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
split the generation for the default storage.conf and when we write it
if not existing for a rootless user.
This is necessary because during the startup we might be overriding
the default configuration through --storage-driver and --storage-opt,
that would not be written down to the storage.conf file we generated.
Closes: https://github.com/containers/libpod/issues/2659
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if the settings are available in the user config file, do not override
them with the global configuration.
Closes: https://github.com/containers/libpod/issues/2614
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we had two functions NewRuntimeFromConfig and NewRuntime that differed
only for the config file they use.
Move comon logic to newRuntimeFromConfig and let it lookup the
configuration file to use when one is not specified.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
In lipod, we now log major events that occurr. These events
can be displayed using the `podman events` command. Each
event contains:
* Type (container, image, volume, pod...)
* Status (create, rm, stop, kill, ....)
* Timestamp in RFC3339Nano format
* Name (if applicable)
* Image (if applicable)
The format of the event and the varlink endpoint are to not
be considered stable until cockpit has done its enablement.
Signed-off-by: baude <bbaude@redhat.com>
allow to configure the path to the network-cmd binary, either via an
option flag --network-cmd-path or through the libpod.conf
configuration file.
This is currently used to customize the path to the slirp4netns
binary.
Closes: https://github.com/containers/libpod/issues/2506
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we use "podman info" to reconfigure the runtime after a reboot, but we
don't propagate the error message back if something goes wrong.
Closes: https://github.com/containers/libpod/issues/2584
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
When the configuration file is specified, be sure to fill rootless
compatible values in the default configuration.
Closes: https://github.com/containers/libpod/issues/2510
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
No reason to do it in util/ anymore. It's always going to be a
subdirectory of c/storage graph root by default, so we can just
set it after the return.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Instead of passing in defaults via WithStorageConfig after
computing them in cmd/podman/libpodruntime, do all defaults in
libpod itself.
This can alleviate ordering issues which caused settings in the
libpod config (most notably, volume path) to be ignored.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If this doesn't match, we end up not being able to access named
volumes mounted into containers, which is bad. Use the same
validation that we use for other critical paths to ensure this
one also matches.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We want named volumes to be created in a subdirectory of the
c/storage graph root, the same as the libpod root directory is
now. As such, we need to adjust its location when the graph root
changes location.
Also, make a change to how we set the default. There's no need to
explicitly set it every time we initialize via an option - that
might conflict with WithStorageConfig setting it based on graph
root changes. Instead, just initialize it in the default config
like our other settings.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The original intent behind the requirement was to ensure that, if
two SHM lock structs were open at the same time, we should not
make such a runtime available to the user, and should clean it up
instead.
It turns out that we don't even need to open a second SHM lock
struct - if we get an error mapping the first one due to a lock
count mismatch, we can just delete it, and it cleans itself up
when it errors. So there's no reason not to return a valid
runtime.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
When we're renumbering locks, we're destroying all existing
allocations anyways, so destroying the old lock struct is not a
particularly big deal. Existing long-lived libpod instances will
continue to use the old locks, but that will be solved in a
followon.
Also, solve an issue with returning error values in the C code.
There were a few places where we return ERRNO where it was not
set, so make them return actual error codes).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We can't do renumbering after init - we need to open a
potentially invalid locks file (too many/too few locks), and then
potentially delete the old locks and make new ones.
We need to be in init to bypass the checks that would otherwise
make this impossible.
This leaves us with two choices: make RenumberLocks a separate
entrypoint from NewRuntime, duplicating a lot of configuration
load code (we need to know where the locks live, how many there
are, etc) - or modify NewRuntime to allow renumbering during it.
Previous experience says the first is not really a viable option
and produces massive code bloat, so the second it is.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add backward compatibility for `runtime_path` that was used by older
versions of Podman.
The issue was introduced with: 650cf122e1
If `runtime_path` is specified, it overrides any other configuration
and a warning is printed.
It should be considered deprecated and will be removed in future.
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
if some paths are overriden in the global configuration file, be sure
that rootless podman honors them.
Closes: https://github.com/containers/libpod/issues/2174
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
we can define multiple OCI runtimes that can be chosen with
--runtime.
in libpod.conf is possible to specify them with:
[runtimes]
foo = [
"/usr/bin/foo",
"/usr/sbin/foo",
]
bar = [
"/usr/bin/foo",
"/usr/sbin/foo",
]
If the argument to --runtime is an absolute path then it is used
directly without any lookup in the configuration.
Closes: https://github.com/containers/libpod/issues/1750
Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com>
