The libpod/network packages were moved to c/common so that buildah can
use it as well. To prevent duplication use it in podman as well and
remove it from here.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Make sure we create new containers in the db with the correct structure.
Also remove some unneeded code for alias handling. We no longer need this
functions.
The specgen format has not been changed for now.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
The new network db structure stores everything in the networks bucket.
Previously some network settings were not written the the network bucket
and only stored in the container config.
Instead of the old format which used the container ID as value in the
networks buckets we now use the PerNetworkoptions struct there.
To migrate existing users we use the state.GetNetworks() function. If it
fails to read the new format it will automatically migrate the old
config format to the new one. This is allows a flawless migration path.
Signed-off-by: Paul Holzinger <pholzing@redhat.com>
Move the core of renaming logic into the DB. This guarantees a
lot more atomicity than we have right now (our current solution,
removing the container from the DB and re-creating it, is *VERY*
not atomic and prone to leaving a corrupted state behind if
things go wrong. Moving things into the DB allows us to remove
most, but not all, of this - there's still a potential scenario
where the c/storage rename fails but the Podman rename succeeds,
and we end up with a mismatched state.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Convert the existing network aliases set/remove code to network
connect and disconnect. We can no longer modify aliases for an
existing network, but we can add and remove entire networks. As
part of this, we need to add a new function to retrieve current
aliases the container is connected to (we had a table for this
as of the first aliases PR, but it was not externally exposed).
At the same time, remove all deconflicting logic for aliases.
Docker does absolutely no checks of this nature, and allows two
containers to have the same aliases, aliases that conflict with
container names, etc - it's just left to DNS to return all the
IP addresses, and presumably we round-robin from there? Most
tests for the existing code had to be removed because of this.
Convert all uses of the old container config.Networks field,
which previously included all networks in the container, to use
the new DB table. This ensures we actually get an up-to-date list
of in-use networks. Also, add network aliases to the output of
`podman inspect`.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
As part of this, we need two new functions, for retrieving all
aliases for a network and removing all aliases for a network,
both required to test.
Also, rework handling for some things the tests discovered were
broken (notably conflicts between container name and existing
aliases).
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The original interface only allowed retrieving aliases for a
specific network, not for all networks. This will allow aliases
to be retrieved for every network the container is present in,
in a single DB operation.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This adds the database backend for network aliases. Aliases are
additional names for a container that are used with the CNI
dnsname plugin - the container will be accessible by these names
in addition to its name. Aliases are allowed to change over time
as the container connects to and disconnects from networks.
Aliases are implemented as another bucket in the database to
register all aliases, plus two buckets for each container (one to
hold connected CNI networks, a second to hold its aliases). The
aliases are only unique per-network, to the global and
per-container aliases buckets have a sub-bucket for each CNI
network that has aliases, and the aliases are stored within that
sub-bucket. Aliases are formatted as alias (key) to container ID
(value) in both cases.
Three DB functions are defined for aliases: retrieving current
aliases for a given network, setting aliases for a given network,
and removing all aliases for a given network.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
The ListContainers API previously had a Pod parameter, which
determined if pod name was returned (but, notably, not Pod ID,
which was returned unconditionally). This was fairly confusing,
so we decided to deprecate/remove the parameter and return it
unconditionally.
To do this without serious performance implications, we need to
avoid expensive JSON decodes of pod configuration in the DB. The
way our Bolt tables are structured, retrieving name given ID is
actually quite cheap, but we did not expose this via the Libpod
API. Add a new GetName API to do this.
Fixes#7214
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
As part of the rework of exec sessions, we need to address them
independently of containers. In the new API, we need to be able
to fetch them by their ID, regardless of what container they are
associated with. Unfortunately, our existing exec sessions are
tied to individual containers; there's no way to tell what
container a session belongs to and retrieve it without getting
every exec session for every container.
This adds a pointer to the container an exec session is
associated with to the database. The sessions themselves are
still stored in the container.
Exec-related APIs have been restructured to work with the new
database representation. The originally monolithic API has been
split into a number of smaller calls to allow more fine-grained
control of lifecycle. Support for legacy exec sessions has been
retained, but in a deprecated fashion; we should remove this in
a few releases.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Refactor the `RuntimeConfig` along with related code from libpod into
libpod/config. Note that this is a first step of consolidating code
into more coherent packages to make the code more maintainable and less
prone to regressions on the long runs.
Some libpod definitions were moved to `libpod/define` to resolve
circular dependencies.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Add ability to evict a container when it becomes unusable. This may
happen when the host setup changes after a container creation, making it
impossible for that container to be used or removed.
Evicting a container is done using the `rm --force` command.
Signed-off-by: Marco Vedovati <mvedovati@suse.com>
This isn't included in Docker, but seems handy enough.
Use the new API for 'volume rm' and 'volume inspect'.
Fixes#3891
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
We need to be able to track the number of times a volume has been
mounted for tmpfs/nfs/etc volumes. As such, we need a mutable
state for volumes. Add one, with the expected update/save methods
in both states.
There is backwards compat here, in that older volumes without a
state will still be accepted.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This will require a 'podman system renumber' after being applied
to get lock numbers for existing volumes.
Add the DB backend code for rewriting volume configs and use it
for updating lock numbers as part of 'system renumber'.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
This swaps the previous handling (parse all volume mounts on the
container and look for ones that might refer to named volumes)
for the new, explicit named volume lists stored per-container.
It also deprecates force-removing volumes that are in use. I
don't know how we want to handle this yet, but leaving containers
that depend on a volume that no longer exists is definitely not
correct.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
If this doesn't match, we end up not being able to access named
volumes mounted into containers, which is bad. Use the same
validation that we use for other critical paths to ensure this
one also matches.
Signed-off-by: Matthew Heon <matthew.heon@pm.me>
Add support for podman volume and its subcommands.
The commands supported are:
podman volume create
podman volume inspect
podman volume ls
podman volume rm
podman volume prune
This is a tool to manage volumes used by podman. For now it only handle
named volumes, but eventually it will handle all volumes used by podman.
Signed-off-by: umohnani8 <umohnani@redhat.com>
Previously, we implicitly validated runtime configuration against
what was stored in the database as part of database init. Make
this an explicit step, so we can call it after the database has
been initialized. This will allow us to retrieve paths from the
database and use them to overwrite our defaults if they differ.
Signed-off-by: Matthew Heon <mheon@redhat.com>
When we create a Libpod database, we store a number of runtime
configuration fields in it. If we can retrieve those, we can use
them to configure the runtime to match the DB instead of inbuilt
defaults, helping to ensure that we don't error in cases where
our compiled-in defaults changed.
Signed-off-by: Matthew Heon <mheon@redhat.com>
It's not necessary to fill in state immediately, as we'll be
overwriting it on any API call accessing it thanks to
syncContainer(). It is also causing races when we fetch it
without holding the container lock (which syncContainer() does).
As such, just don't retrieve the state on initial pull from the
database with Bolt.
Also, refactor some Linux-specific netns handling functions out
of container_internal_linux.go into boltdb_linux.go.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #1186
Approved by: rhatdan
Dependency containers must be in the same namespace, to ensure
there are never problems resolving a dependency.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Add a mutable state to pods, and database backend sutable for
modifying and updating said state.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #784
Approved by: rhatdan
This solves some dependency problems in the state, and makes
sense from a design standpoint.
Containers not in a pod can still depend on the namespaces of
containers joined to a pod, which we might also want to change in
the future.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #184
Approved by: baude
This ensures that there is only one canonical place where
containers in a pod are stored, in the state itself.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #268
Approved by: rhatdan
Add new functions to update pods and add/remove containers from them
Use these new functions in place of manually modifying pods
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #229
Approved by: rhatdan
Also prevent containers with dependencies from being removed from
in memory states. SQLite already enforced this via FOREIGN KEY
constraints.
Signed-off-by: Matthew Heon <matthew.heon@gmail.com>
Closes: #220
Approved by: rhatdan
