Followup to #10932: add a validation check to prevent introduction
of new 'Expect(foo.ExitCode()).To(...)' patterns. If such use is
absolutely necessary -- there is one such instance in the code
already -- require that the assertion include a description.
Also: clean up instances that were introduced since the merging
of #10932.
Also: fix one remaining instance in run_exit_test.go: it had
a FIXME comment mentioning a race condition, but unfortunately
there was no issue or bug ID, hence no way to know if the race
is fixed or not. We will assume it is.
Signed-off-by: Ed Santiago <santiago@redhat.com>
We no longer need to install /etc/cni/net.d/87-podman-bridge.conflist
so install.cni isn't needed either.
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
As near as I can tell, sometime between `v1.6.4` and `v1.9` the definition
of `LDFLAGS_PODMAN_STATIC` was both created and lost. Additionally, after
a refactoring of the `Makefile` it was possible to enable CGO (which
will cause a dynamic binary to be built). Fix both issues by adding the
missing definition and forcing CGO to be disabled.
Signed-off-by: Chris Evich <cevich@redhat.com>
* Add podman-restart systemd unit file and add it to podman RPM package
* Fix podman start to filter all containers + unit test
Signed-off-by: Boaz Shuster <boaz.shuster.github@gmail.com>
The following manpages have been adapted to the MANPAGE_SYNTAX:
- podman-completion
- podman-container-checkpoint
- podman-container-cleanup
- podman-container-exists
The following manpages have had little changes:
- podman-attach
- podman-commit
- MANPAGE_SYNTAX
- Makefile
Signed-off-by: Alexander Richter <67486332+Procyhon@users.noreply.github.com>
- Bugfix `make nixpkgs` which pin with branch `nixos-21.05`
- Code lint with `nixpkgs-fmt`
- Code sync between x86\_64 and aarch64
Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
Updated version for the MANPAGE_SYNTAX and adaption of the syntax for
the manpages of podman-commit, podman-attach, and podman-auto-update.
Signed-off-by: Alexander Richter <67486332+Procyhon@users.noreply.github.com>
* Tests broken up into areas of concern
* Introduced fixtures to reduce duplicated code
* Introduced new assert methods with APITestCase
* General cleanup of code while visiting
* Tests now targeting quay.io
Known issues:
* is-official against quay.io not working
Fixes: #9238
Signed-off-by: Jhon Honce <jhonce@redhat.com>
Once we settle on the wording for short-names in podman-pull, I will
add the same section to all of the podman commands that use pull.
Also ran through all man pages with a spell checker.
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
The following content was omitted:
- Text after the first markdown link on a line to the end of the last
(in lines with multiple markdown links)
- Email addresses of the form <a...@...>
Fixed by:
- Making the first two regexes match each link individually, instead
of matching from the start of the first link to the end of the last
- Making the last regex specifically match <a> and </a> tags
Signed-off-by: Rob Cowsill <42620235+rcowsill@users.noreply.github.com>
* Incorporate changes from abandoned #9918: Use dedicated `bin`
sub-directories for `windows` and `darwin` when building
`podman-remote`. The linux flavor remains under `bin` as before.
* Fix MacOS Documentation-generation for release-packaging.
The `install-podman-remote-%-docs` target requires local execution
of `podman-remote`, but it was assuming GOOS=linux. Fix this
by dynamically discovering the local OS/architecture type while
still permitting cross-building of MacOS binaries under Linux.
* Unify temporary directory/file behavior to use a common template.
In case of left-over temporary items left in the repository,
update the `clean` target accordingly to remove them.
* Fix broken podman-remote-static and MacOS release archive targets
mismatching the `podman-remote-%` target. Disambiguate this target
for all platforms by spelling each out in full, instead of using
a wild-card recipe.
* Fix Windows-installer target to properly recognize existing
output files and not constantly rebuild every time.
* Include the podman version number in the Windows-installer target
in case a user downloads multiple releases.
* Include a subdirectory containing the podman version number for
both `tar.gz` and `zip` targets. This prevents users clobbering
existing directories when un-archiving from releases.
Signed-off-by: Chris Evich <cevich@redhat.com>
Over several years the podman Makefile has become a
bloated complex mess. This impedes both debugging
and maintenance, besides causing general eye-strain.
Fix this by adding a simple navigation/layout guide, to help
developers quickly find what's needed. Re-organize the entire
file according to the new layout guide. Add section headers
that call out the purpose of the encompassed content, and
are easy to locate with search-tools.
Note: No recipes or definitions have been altered by this
commit, only re-arranged.
Signed-off-by: Chris Evich <cevich@redhat.com>
An in-line Python script, while flexible, is arguably
more complex and less stable than the long-lived `grep`,
`awk`, and `printf`. Make use of these simple tools
to display a column-aligned table of target and description
help output.
Also, the first target that appears in a Makefile is considered
the default (when no target is specified on the command-line).
However, despite it's name, the `default` target was not listed
first. Fix this, and redefine "default" target to "all" as
intended, instead of "help".
Lastly, add a small workaround for a vim syntax-hilighting bug.
Signed-off-by: Chris Evich <cevich@redhat.com>
Instead of shelling out frequently to resolve the current
directory, use the Makefile built-in `$(CURDIR)`. It has
the exact same meaning w/in the context of a `Makefile`.
Ref.:
https://www.gnu.org/software/make/manual/html_node/Quick-Reference.html
Signed-off-by: Chris Evich <cevich@redhat.com>
Previously this was needed for an automated release process. That
automation has long since been removed. Simplify the Makefile
by removing the target and references.
Signed-off-by: Chris Evich <cevich@redhat.com>
- Bugfix `make nixpkgs` which pin with branch `nixos-20.09`
- Code lint with `nixpkgs-fmt`
- Code sync between x86\_64 and aarch64
Signed-off-by: Wong Hoi Sing Edison <hswong3i@pantarei-design.com>
The split of install.docker and install.docker-docs makes some sense but
there should be some way to specify both for packagers.
This introduces `make install.docker-full` which installs both the
docker binary and the documentation.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Commit 3908c00799 introduces a split for
installing the docker binary and the docker documentation. The
install line creating BINDIR and MANDIR was both moved to the
install.docker-docs path which makes `install.docker` fail.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Add support for generating powershell completion files. This is especially
useful for people using the podman remote client on windows.
[NO TESTS NEEDED]
Signed-off-by: Paul Holzinger <paul.holzinger@web.de>
This will allow installation of the manpages without the need to rebuild
them in the installation stage of distro packaging.
[NO TESTS NEEDED]
Signed-off-by: Lokesh Mandvekar <lsm5@fedoraproject.org>
We missed bumping the go module, so let's do it now :)
* Automated go code with github.com/sirkon/go-imports-rename
* Manually via `vgrep podman/v2` the rest
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Backstory: every time you run 'make podman' or even
just 'make', you get a full recompile. This is sub-ideal.
Cause: I don't really know. It looks complicated. #5017
introduced a .PHONY for bin/podman, for reasons not
explained in the PR. Then, much later, #5880 well-
intentionedly but improperly tweaked the 'find'
command used in defining SOURCES, adding a -prune
but without the corresponding and required -print.
Let's just say, it was an unfortunate cascade of events.
This PR fixes the SOURCES definition and removes the
highly-undesired .PHONY from podman & podman-remote,
making it so you can type 'make' and, oh joy, not
build anything if it's current. The way 'make' is
supposed to work.
Why fix this now? Because my PR (#9209) was failing in CI,
in the Validate step:
Can't exec "./bin/podman": No such file or directory at hack/xref-helpmsgs-manpages line 223.
It failed even on Re-run, and only passed once I force-pushed
the PR (with no changes, just a new commit SHA). I have no idea
why bin/podman wasn't built, and I have zero interest in pursuing
that right now, but the proper solution is to add bin/podman as
a Makefile dependency for that particular test. So done.
While I'm at it, fix what is pretty clearly a typo in a .PHONY
And, finally, fix a go-md2man warning introduced in #9189
[NO TESTS NEEDED]
Signed-off-by: Ed Santiago <santiago@redhat.com>
Create a new common target, ginkgo-run, with the main ginkgo
test incantation; ginkgo and ginkgo-remote now invoke that,
with a clearer distinction between their arguments.
Reason for this: 'make remoteintegration' was not generating
ginkgo logs in CI. Reason: '-debug' option was missing from
the ginkgo incantation. Reason: impossibility of maintaining
duplicate long-complicated lines. This PR distills the common
aspects, making the differences clearer between local & remote.
IMPORTANT NOTE: '-nodes 3' was also missing from remote ginkgo.
This PR adds it. If this was intentionally omitted, please let
me know (with reasons) so I can refactor that too.
[NO TESTS NEEDED]
Signed-off-by: Ed Santiago <santiago@redhat.com>
Generate shell completion files for podman and podman-remote
and for all known shells (bash, fish, zsh). Fix Readme file
in completions dir: it suggested running 'make completion',
singular; no such target existed. Since the install target
is plural, I choose to make the new target plural also.
This is intended for use in CI some day, in a check such as:
(in contrib/cirrus/runner.sh):
make completions
SUGGESTION="run 'make completions' and commit all changes" ./hack/tree_status.sh
The goal would be to make sure that any new podman subcommands
or flags are accompanied by their corresponding shell helpers
on all commits.
IT IS NOT POSSIBLE TO ENFORCE THIS NOW. As I understand it,
Cobra is slow to incorporate community PRs, so the podman team
has chosen to sneak in completion files generated by an
unreleased and un-vendored version of Cobra. Running 'make
completions' right now would clobber those and result in
a diminished user experience.
I'm submitting this anyway as a stepping-stone toward that
future day when we can create such a CI hook.
[NO TESTS NEEDED]
Signed-off-by: Ed Santiago <santiago@redhat.com>
Make sure that bindings are in sync with the code. The check is similar
to what's already being done with `make vendor`, so integrate the two.
[NO TESTS NEEDED]
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Instead of implicitly generating the bindings, make it explicit, similar
to `make vendor`. This should prevent redundant and possibly error
prone generations. A following commit will shield CI.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
The Go gods did not shine upon us trying to understand what's going on
in #9000. The symptom is that `go generate` did not add required
imports to a generated file, ultimately breaking subsequent compilation.
While it still remains unclear *why* Go is behaving like that, the
symptom disappears when `go generate` runs in module mode; that is
without `-mod=vendor` and without `GO111MODULE=off`. This was
reproducible on two separate machines (Ubuntu and Fedora).
Also, when facing an unset GOPATH, set it to Go's default (i.e.,
$HOME/go) and make sure that GOBIN is in PATH since `goimports`
is required by `go generate`.
Fixes: #9000
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This reverts commit de05e58168.
Running `go get -u` will change the local Go module causing CI to fail
as the local git tree is being changed. Reverting the change for now
until we have a better idea.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
I'm tired of seeing these every time I run 'make':
WARNING: go-md2man does not handle node type HTMLSpan
Cause: left-angle-brackets ( < ) in document source
Solution:
1) backquote-escape those that need to be shown, usually
ones referring to an argument or email address; or
2) Actual HTML ( <sup> and <a> ) which are meant to be
shown in generated HTML docs but can't be shown in
man pages, we filter out via a sed expression.
Signed-off-by: Ed Santiago <santiago@redhat.com>
On each PR (with a few exceptions), check the list of git-touched
files, and abort if no tests are added. Include instructions
on how to bypass the check if tests really aren't needed.
Include a hardcoded exception list for PRs that only touch a
well-known subset of "safe" files: docs, .cirrus.yml, vendor,
version, hack, contrib, or *.md. This list is likely to need
tuning over time.
Add a test suite, but not one recognized by the new script
(because it's a "*.t" file), so: [NO TESTS NEEDED]
Signed-off-by: Ed Santiago <santiago@redhat.com>
Install ginkgo on demand via `go get -u` rather than keeping a copy it's
entire source code in the vendor dirctory. The main motivation for that
is to make `golangci-lint` happy which is continuously throwing up on
the import of a program (i.e., ginkgo). The linter is broken and stupid
as it ignores flags to ignore dirs and ignores build tags (at least some
linters do) which is blocking us from updating to newer versions.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Run `go generate ./pkg/bindings/...` once for all bindings instead of
generating them separately. This should speed up bindings generation
as a given package is visited only once, and it fixes#8989 by dropping
the use of pushd and popd.
Fixes: #8989
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Set `-mod=vendor` when generating the bindings. We expect all
dependencies to be vendored already. This should slightly speed
up the bindings generation and prevent redundant network accesses.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
This involves a new test binary (a basic implementation of the
volume plugin protocol) and a new image on quay.io (Containerfile
to produce it and all sources located in this commit). The image
is used to run a containerized plugin we can test against.
Signed-off-by: Matthew Heon <mheon@redhat.com>
Add a `.generate-bindings` make target that only runs in the absence of
the `.generate-bindings` file or when a `types.go` file below
`pkg/bindings` has changed.
This will regenerate the go bindings and make sure the code is up2date.
Signed-off-by: Valentin Rothberg <rothberg@redhat.com>
Signed-off-by: Daniel J Walsh <dwalsh@redhat.com>
